ThRIve: Thermally Robust CNN Inference via Low-Rank Adaptation in Heterogeneous PIM Architectures

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

On-device LLM inference is increasingly attractive for privacy-preserving, reliable, and cost-effective deployment, yet its energy and thermal costs remain a critical bottleneck. Existing systems primarily optimize for decoding speed, implicitly assuming that faster execution is always preferable. We show instead that on-device LLM inference often has exploitable configuration slack: modestly lowering NPU and memory frequencies preserves quality of experience (QoE) while substantially improving energy efficiency and reducing heat. Realizing this opportunity in production is challenging. The most energy-efficient NPU/DDR setting varies with the model, inference engine, platform, and runtime conditions, with no stable ranking across configurations. Commercial devices further lack component-level power sensing, and shell temperature evolves with request arrivals, response lengths, and thermal history. To address these challenges, we propose EnerInfer, the first on-device LLM inference framework that jointly manages energy efficiency, throughput, and thermal comfort for LLM workloads. EnerInfer replaces per-model profiling and sensor-heavy control with disaggregated, model-structure-aware prediction and ranking-driven online feedback. It predicts throughput and power for unseen LLMs across NPU/DDR frequency settings, selects QoE-satisfying efficient configurations under runtime interference, and uses lightweight limited-horizon thermal prediction to dynamically switch between energy-optimized and thermally constrained inference. Evaluations on real-world LLMs show that EnerInfer improves energy efficiency by up to 65%, 12%, and 24% on phones, a laptop, and a development board, respectively, without QoE violation.

Traditional CPU, GPU, and NPU architectures are increasingly limited by the von Neumann bottleneck. While In-Memory Computing (IMC) using ReRAM crossbar arrays offers a high-density, energy-efficient alternative, its practical deployment is constrained through their non-idealities. Existing hardware-aware training frameworks often require training from scratch, which is computationally prohibitive for modern large-scale models. In this work, we propose a finetuning-based hardware-aware training algorithm that enables robust DNN deployment on ReRAM with minimal training overhead. Our approach mitigates I-V non-linearity by applying a range-shrunk sinh transformation and incorporates retention errors directly into a regularization loss during the finetuning process. We evaluate our framework across models and tasks such as image classification and question-answering (QA). Experimental results demonstrate that our method achieves similar accuracy on large-scale models like ResNet18 and DeiT-Tiny as the base model. In-case of ImageNet for MobileNetV3 families the technique has only less than 2% accuracy degradation. Further, applying the technique on the SQuAD v2 dataset results in only 1 point degradation of F-1 score.