cs.ARJul 20, 2026

Opto-ViT-v2: Noise-Resilient On-Chip Fine-Tuning for Photonic Near-Sensor Vision Transformer Accelerators

Authors: Xuming Chen, Deniz Najafi, Mehrdad Morsali, Chengwei Zhou, Zahra Ghanaatianjobzari, Mahdi Nikdast, Shaahin Angizi, Gourav Datta

Organizations: Case Western Reserve University · USA · New Jersey Institute of Technology · Colorado State University

Abstract

Silicon-photonic (SiPh) accelerators have emerged as a promising platform for Vision Transformer (ViT) inference by performing matrix multiplications on microring-resonator (MRR) banks with high throughput and energy efficiency. Extending these platforms to support on-chip fine-tuning remains challenging because backpropagation requires large activation storage, frequent weight write-back to MRRs, and tolerance to device-level noise. We present Opto-ViT-v2, the first framework for parameter-efficient fine-tuning (PEFT) on a near-sensor SiPh ViT accelerator. Our tensorized low-rank decomposition separates pretrained optical weights from a small set of trainable electronic factors (as few as 8K parameters for ViT-Base), greatly reducing activation storage and weight updates while enabling practical on-chip training. We further introduce a gradient-accumulated sparse classifier that freezes low-importance weights through one-shot top-k gradient masking, reducing classifier training cost by about 40 percent. We also develop the first system-level noise model for photonic on-chip training, capturing the effects of MRR crosstalk, thermal drift, and laser amplitude noise during both forward and backward propagation. Calibrated using measurements from more than 200 fabricated MRR devices, the model shows that low-rank factor updates are more robust than full fine-tuning and conventional layer-wise low-rank adaptation under identical noise conditions. Experiments on VTAB-1K (19 tasks) and FGVC few-shot benchmarks demonstrate that Opto-ViT-v2 recovers within 0.3 to 0.8 percent of clean software accuracy under measured photonic noise while achieving more than 100 KFPS/W, enabling practical on-chip domain adaptation for photonic edge vision systems.

Explore similar work

CardsList
Jun 30, 2026cs.AR

FlexViT: A Flexible FPGA-based Accelerator for Edge Vision Transformers

Deploying Vision Transformer (ViT) models on edge platforms remains challenging due to their high computational demands and the architectural heterogeneity of modern hybrid ViT models, which incorporate both fully connected and convolutional layers. This heterogeneity leads to significant variation in tensor shapes, requiring flexible and efficient FPGA-based acceleration. In this paper, we present FlexViT, a reconfigurable FPGA accelerator for efficient ViT inference on resource-constrained edge devices. Built on the SECDA-TFLite framework, FlexViT employs a hardware-software co-design approach that maps both fully connected and convolutional layers onto a unified high-throughput INT8 GEMM engine using a runtime im2col transformation. To efficiently support diverse layer configurations, we propose a dual-mode dataflow that dynamically switches between input and weight reuse by reconfiguring the compute array at runtime. We further introduce a depth-first tiling strategy that completes accumulation in a single pass, eliminating off-chip partial-sum transfers and reducing memory bandwidth requirements. We implement FlexViT on a PYNQ-Z2 FPGA and evaluate it across a representative set of ViT models. FlexViT achieves up to 2.74x speedup on accelerator-executed layers, translating into up to 1.40x end-to-end speedup compared to CPU-only execution. The code is available at: https://github.com/gicLAB/FlexViT
Hubert Dymarkowski, Xingjian Fu, Rappy Saha +2
Self-Supervised Vision TransformersLightweight Convolutional Neural Network Hardware AcceleratorAcceleratorField-Programmable Gate Arrays
AskPDF
Date pendingcs.CV

Joint Architecture-Token-Bitwidth Multi-Axis Optimization of Vision Transformers for Semiconductor IC Packaging

Vision Transformers (ViTs) have achieved strong visual recognition performance, yet their deployment in resource-constrained industrial environments remains limited. The main challenges are their high computational cost, memory requirements, and energy consumption. While individual efficiency techniques such as neural architecture search (NAS), token compression, and low-precision inference have been extensively studied, most prior work targets only a single optimization axis, limiting overall deployment gains while preserving accuracy. In this paper, we present one of the first holistic frameworks that jointly optimizes three complementary axes: architecture, token, and bit-width. Specifically, the framework identifies compact backbones via Neural Architecture Search (AutoFormer), reduces information processing via token merging (ToMe), and accelerates per-operation execution via fp16 mixed-precision inference. In our study, we analyze accuracy-efficiency trade-offs on ImageNet-1K under aggressive compression. We then apply the selected configurations to a real-world in-house 3D X-ray semiconductor defect classification dataset for IC chip packaging inspection. Results show that the proposed multi-axis framework achieves more than 10×10\times improvement in throughput along with over 10×10\times reductions in parameter count, FLOPs, and energy consumption, while maintaining the required accuracy on the downstream industrial task. To the best of our knowledge, this is among the earliest works to jointly optimize architecture, token, and bit-width dimensions in ViTs and the first such resource-efficient, deployment-focused study for semiconductor manufacturing.
Phat Nguyen, Xue Geng, Kaixin Xu +3
Self-Supervised Vision TransformersVision TransformerLightweight Convolutional Neural Network Hardware AcceleratorToken CompressionNeural Architecture SearchSemiconductor Manufacturing
AskPDF
May 11, 2026cs.CV

MicroViTv2: Beyond the FLOPS for Edge Energy-Friendly Vision Transformers

The Vision Transformer (ViT) achieves remarkable accuracy across visual tasks but remains computationally expensive for edge deployment. This paper presents MicroViTv2, a lightweight Vision Transformer optimized for real-device efficiency. Built upon the original MicroViT, the proposed model is designed based on reparameterized design, specifically Reparameterized Patch Embedding (RepEmbed) and Reparameterized Depth-Wise convolution mixer (RepDW) for faster inference, and introduces the Single Depth-Wise Transposed Attention (SDTA) to capture long-range dependencies with minimal redundancy. Despite slightly higher FLOPs, MicroViTv2 improves accuracy up to 0.5% compared to its predecessor and surpassing MobileViTv2, EdgeNeXt, and EfficientViT while maintaining fast inference and high energy efficiency on Jetson AGX Orin. Experiments on ImageNet-1K and COCO demonstrate that hardware-aware design and structural re-parameterization are key to achieving high accuracy and low energy consumption, validating the need to evaluate efficiency beyond FLOPs. Code is available at https://github.com/novendrastywn/MicroViT.
Novendra Setyawan, Chi-Chia Sun, Mao-Hsiu Hsu +2
Self-Supervised Vision TransformersVision TransformerFaster Inference
AskPDF