Robust embodied robots should be able to recover from failures and retry tasks in order to operate reliably in unstructured and noisy real-world environments. Achieving this capability requires training policies on data that captures recovery behaviors. However, collecting such data through robot teleoperation is difficult to scale, as it is time-consuming to induce diverse failure states, perform corrective actions, and reset the environment. This challenge is further exacerbated by the high diversity of failure modes, which demands substantially more recovery data than success demonstrations. In this work, we show that egocentric human data capturing failure recovery processes provides a scalable alternative. By efficiently arranging task-level failure configurations and recording short recovery segments, human operators can generate more than 10x as much valid recovery data per hour compared to robot teleoperation under our protocol. To address the embodiment gap between human and robot, we propose EgoRecovery, a co-training framework for learning recovery behavior, where human recovery demonstrations are aligned to a compact corrective-intent space shared with robot data, which captures the timing and magnitude of correction. Only a small number of robot recovery demonstrations are required to connect this intent to executable robot actions. At deployment, a learned recovery gate predicts when correction is needed from robot observations and activates the corrective intent only in recovery states. Experiments on real-world recovery tasks show that EgoRecovery improves success from failure starts over robot-only recovery, direct co-training with human recovery data, and direct intent-transfer baselines.
Understanding how users perceive and respond to robot failures is essential for building robust and trustworthy robot systems. Prior work, however, (i) often treats failures as independent events, (ii) emphasizes binary failure detection, (iii) with rule-based recovery modeling. We present REPAIR-Bench, built on 214 interaction trials from 41 participants, the benchmark spans four induced failure types and provides synchronized facial action units, head pose, speech transcripts, and post-interaction affect and recovery reports. The benchmark spans three novel evaluation tasks that jointly capture the lifecycle of failure in human-robot interaction (HRI): (i) failure detection over inter-dependent interaction sessions, modeling longitudinal user adaptation across repeated failures; (ii) visual failure-type classification beyond binary success/failure formulations; and (iii) user-centered recovery prediction, inferring users' preferred recovery strategies from interaction context rather than relying on manually designed or rule-based strategies. In baseline experiments, hierarchical recurrent modeling improved failure detection over a single-session model (strict F1: 0.80 vs. 0.68), achieved a failure localization mean signed error of -0.51 s, median absolute error of 2.97 s and, for recovery prediction, a QLoRA-tuned Mistral-7B reached Hit@5=0.76 and F1@5=0.32. REPAIR-Bench provides both the HRI and Medical HRI communities with a standardized framework for (1) evaluating robot failures and (2) building transparent, adaptive, and trustworthy recovery systems.
Robot policies inevitably encounter failures when deployed in real environments. Naive retries often repeat the same mistakes, while many existing recovery methods rely on human intervention. In this paper, we propose Failure-Aware Retry (FAR), a framework that enables robots to learn from previous failures at test time, adapt their behavior accordingly, and eventually complete the task autonomously. FAR combines Failure-Contrastive Preference Adaptation, which constructs preference learning data from failures to steer the policy away from previously unsuccessful behaviors, with lightweight action perturbations during retries to encourage local exploration. We further incorporate successful recovery trajectories into a training loop for continual policy improvement. Experiments in both simulation and real-world manipulation tasks show that FAR substantially improves success rates and robustness, with average gains of 17.6% over the standard diffusion policy in simulation and 11.7% in the real world. In addition, FAR significantly improves data efficiency under both reset and timestep budgets during continual policy improvement by exploiting informative failure cases.
Vision-Language-Action (VLA) or World Action (WAM) models have recently demonstrated remarkable performance in robotic manipulation. On LIBERO, SOTA method have achieved nearly 100% success rates, seemingly suggesting that the models are ready for deployment in real world. However, near perfect performance on existing benchmarks can be misleading: success under ideal conditions does not imply real world robustness. Existing benchmarks primarily evaluate task completion from predefined initial states, while real world interactions inevitably involve failures such as failed grasps, collisions, and unintended object movements. A robot must therefore not only execute tasks successfully, but also recognize and recover from failures to continue the task. Yet this capability remains largely unmeasured, revealing a critical gap between benchmark performance and real world reliability. To address this gap, we introduce LIBERO-Recover Benchmark, a large scale benchmark for failure recovery in robotic manipulation. Built upon LIBERO, we collect real execution failures from SOTA embodied models and construct 1,000+ scenarios across four recovery levels: (1) Action Retry, (2) Action Adaptation, (3) Object State Recovery, and (4) Environmental Recovery. We evaluate four core capabilities: spatial understanding, object structure reasoning, interaction understanding, and topological reasoning. As the first large-scale benchmark for embodied failure recovery, LIBERO-Recover shifts evaluation from \emph{Can the robot succeed?''} to \emph{Can the robot recover after failure?''}, promoting robust and generalizable embodied agents. The project will be avaible in \textcolor{blue}{https://liulin815.github.io/LIBERO-Recovery/}.