Bimanual object reorientation - picking an object, handing it over between two arms, and placing it in a desired target pose - is valuable when direct placement from the initial grasp is infeasible due to collisions, kinematic constraints, or poor final orientation. However, achieving this under multiple competing objectives remains challenging. We introduce BiCompoDiff, a compositional diffusion and energy-based framework that jointly optimizes grasp selection, handover, regrasp, and motion planning under multiple constraints. By combining a pretrained grasp diffusion model with bimanual planning energy-based models (EBMs), our method injects gradient guidance during reverse diffusion to enforce collision avoidance, trajectory smoothness (via differentiable inverse kinematics), handover feasibility, and regrasp safety. Annealed MCMC sampling further refines grasp poses over the composite energy landscape. Experiments across diverse simulated household reorientation tasks demonstrate that BiCompoDiff achieves over 20% higher success rates and up to 37% smoother trajectories (measured by joint displacement) compared to strong sampling-based baselines. Real-world validation confirms effective sim-to-real transfer and robust performance on challenging scenes.
Regrasp planning is often required when one pick-and-place cannot transfer an object from an initial pose to a goal pose while maintaining grasp feasibility. The main challenge is to reason about shared-grasp connectivity across intermediate poses, where discrete search becomes brittle. We propose an implicit multi-step regrasp planning framework based on differentiable pose sequence connectivity metrics. We model grasp feasibility under an object pose using an Energy-Based Model (EBM) and leverage energy additivity to construct a continuous energy landscape that measures pose-pair connectivity, enabling gradient-based optimization of intermediate object poses. An adaptive iterative deepening strategy is introduced to determine the minimum number of intermediate steps automatically. Experiments show that the proposed cost formulation provides smooth and informative gradients, improving planning robustness over other alternatives. They also demonstrate generalization to unseen grasp poses and cross-end-effector transfer, where a model trained with suction constraints can guide parallel gripper grasp manipulation. The multi-step planning results further highlight the effectiveness of adaptive deepening and minimum-step search.
Coordinated bimanual manipulation is challenging because the motion of either arm can alter the shared 3D scene and thereby affect the other arm. Yet most diffusion policies generate actions without explicitly modeling these future geometric consequences, while predictive variants typically use future state only as auxiliary supervision or fixed conditioning. We address this limitation by proposing JAMB, a diffusion policy that jointly denoises bimanual actions and future 3D point tracks. By allowing action and track hypotheses to evolve together within a shared Transformer, each can inform and refine the other throughout denoising. We further ground multimodal representations in a shared spatiotemporal coordinate system to facilitate geometry-aware interaction during joint denoising. We evaluate JAMB on diverse bimanual manipulation tasks in RoboTwin 2.0 and on a real-world robot, comparing it with action-only policies and alternative future-prediction approaches spanning different state representations and learning objectives. Across 16 simulation tasks, JAMB achieves an average success rate of 83.4%, outperforming the strongest baseline by 23.9 percentage points. On three real-world tasks, it outperforms the action-only and auxiliary geometry prediction methods by 50.0 and 21.2 percentage points, respectively. Beyond these performance gains, JAMB shows stronger generalization to cluttered scenes and out-of-distribution backgrounds than the evaluated baselines. Together, these results demonstrate the effectiveness of our joint action-motion modeling framework for coordinated bimanual manipulation. Our project website is available at https://jam-bimanual.github.io/
We present R2HandoverSim, a simulation benchmark for robot-to-human (R2H) object handovers. Although R2H handover methods have advanced rapidly, the lack of standardized evaluation protocols impedes objective comparison. Our benchmark enables reproducible evaluation by systematically comparing four baselines on their predicted shared grasp poses. We conduct a user study with 30 participants, analyze baseline performance, and show that simulation results correlate with real-world evaluation outcomes. Crucially, five complementary metrics (planning feasibility, reachability, grasp stability, grasp affordance, and safety) better reflect user-perceived handover quality than overall success rate alone. Website and code: https://robot-future.github.io/r2handoversim/.