FutureRTC: Real-Time Robot Execution with Anticipatory-Conditioned Action Chunking

Vision-language-action (VLA) models have shown strong potential for general-purpose robot manipulation, but their inference latency remains a major obstacle to stable high-frequency control. Asynchronous execution mitigates this bottleneck by overlapping policy inference with action execution, yet the next action chunk is still predicted from stale observations while the robot continues to move. Direct chunk stitching therefore introduces handoff discontinuities, action jitter, and failures in contact-rich manipulation. Existing remedies typically require either full-policy retraining or architecture-specific runtime logic. This work proposes Action ControlNet (ACNet), a lightweight delay-aware adapter that uses the executed motion suffix as a residual condition for a mostly frozen action head. ACNet leaves the pretrained backbone unchanged, introduces few trainable parameters, and remains compatible with generative action heads such as diffusion and flow matching. On Kinetix, Meta-World MT50, and a real-world SO-ARM101 platform, ACNet improves robustness under inference delay and yields smoother asynchronous trajectories than direct chunk stitching, while remaining more lightweight than full delay-conditioned retraining.

Vision-Language-Action (VLA) models offer a promising path to generalist robot control, but their inference latency causes observation staleness when generated actions are executed asynchronously. Several methods have been proposed concurrently to mitigate this problem: inference-time inpainting (IT-RTC), training-time delay simulation (TT-RTC), future-state-aware conditioning (VLASH), and lightweight residual correction (A2C2). Each takes a fundamentally different approach, but they have so far been evaluated independently with different codebases, base policies, and protocols. We present a systematic comparison of these four methods under controlled conditions. We develop two unified codebases that integrate all methods with harmonized library and dataset versions, and we benchmark them on the Kinetix suite with MLPMixer policies and on the LIBERO manipulation benchmark with SmolVLA, sweeping inference delays up to $d=20$ control steps. A2C2's per-step residual correction is the most effective method on Kinetix, holding above 90% solve rate up to $d=8$, and also leads on LIBERO from $d=4$ onwards. IT-RTC is competitive at low delays but degrades sharply under long chunks ($H=30$) and high delays. TT-RTC is the most robust training-based method: stable across d_\max choices, generalizes beyond its training delay distribution, and adds zero inference overhead. VLASH exhibits a clear low-delay vs. high-delay trade-off governed by the fine-tuning delay range [0,d_\max]. Code is available at https://github.com/TheAyos/async-vla-inference

Recent vision-language-action and diffusion-based robot policies often use action chunking, where each policy query predicts a sequence of future actions and the robot executes an open-loop prefix before re-querying. While this interface improves local motion continuity, deployment still requires choosing the execution horizon: how much of each predicted chunk should be executed before acquiring a new observation. However, our experiments show that success is strongly task-dependent and non-monotonic with respect to the execution horizon, making a single constant horizon an unreliable deployment rule. We propose PACE (Phase-Aware Chunk Execution), a training-free test-time execution method that selects the execution horizon online from the predicted chunk itself. PACE exploits the phase-dependent kinematic structure of manipulation trajectories by identifying low-speed transition points in the predicted speed profile and using them as candidate replanning boundaries. Because PACE uses only the predicted action chunk, it is plug-and-play and requires no retraining or access to policy internals. We validate PACE through large-scale evaluations in both simulation and real-robot settings. On 50 RoboTwin2.0 tasks, PACE raises the average success rate from 57.8% to 64.2%. In real-robot experiments on bimanual ALOHA and single-arm Franka platforms, PACE improves the average task score from 60.7 to 77.7 and the average success rate from 50.7% to 70.4%. Ablations and rollout-level analyses show that PACE adapts execution horizons across manipulation phases, shortening near transitions while preserving longer execution during coherent motion.