Capacity-Aware Deep Learning for Generalizable Traffic Volume Estimation Across Links and Cities
Authors: Léo Hein, Giovanni De Nunzio, Aurélie Pirayre, Laurent Najman
Abstract
Network-wide traffic volume estimation typically relies on propagating measurements from fixed sensors, making performance highly dependent on sensor density and limiting deployment in sparsely instrumented networks. We propose a link-level learning framework that estimates hourly traffic volumes from widely available territorial data only, including probe speed profiles, road and topological descriptors, along with weather observations. A supervised local mapping is learned from sparse sensor measurements and evaluated under two generalization settings: intra-network (unseen links within the training network) and inter-network (unseen city). This formulation frames traffic volume estimation as a spatial out-of-distribution generalization problem under sparse supervision. To enhance spatial robustness, we introduce a capacity-aware formulation that models volume as the product of a link-specific structural capacity and an hourly regime-aware utilization ratio, embedding traffic-theoretic constraints directly into the learning process. Extensive experiments in both generalization settings demonstrate that the proposed structural constraints consistently outperform a state-of-the-art baseline under spatial distribution shift.
We propose a method for estimating time-varying traffic flow patterns from sparse aggregated vehicle counts. The method partitions the study area into spatial regions, constructs a set of feasible region-to-region routes, and solves a weighted least-squares optimization problem to determine the number of vehicles to allocate on each route. A weighted contribution matrix encodes sensor coverage, steering the optimizer toward flow configurations that are directly observable by sensors. Edge-level trajectories are then derived by scoring candidate routes against the temporal and volumetric profiles of aggregated regional sensor counts. The method is evaluated on the Brussels road network using real and synthetic traffic data. Results show that the proposed approach reproduces the daily traffic profile in the input data and outperforms the baseline methods at a fraction of the computational cost.
Accurate measurement of traffic volumes and flows is vital for modern intelligent transportation. However, despite recent technological advances in sensor devices, it is still expensive to install and maintain fixed traffic counters. Therefore, it is restricted to a small portion of location points where the counters can be installed, which severely limits the possibility of grasping and predicting the total traffic volume at a city-wide level. By contrast, devices with location history such as smartphones and connected vehicles are now widely used and provide much wider spatial coverage. However, the data from these devices are usually partial and noisy, so they are not enough to directly estimate total traffic volumes and flows. In this paper, we use the information from these widely available devices to help decide where to place additional traffic counters, and we study how selecting new measurement locations can improve city-wide traffic estimation performance. To achieve this, we propose an algorithm that chooses additional counter locations to increase the diversity of observed traffic signal patterns, rather than simply spreading counters evenly over space. The goal is to capture traffic-pattern types that are rare in the current counter set and to make the collected observations more representative for later estimation and forecasting. We also present a real-world evaluation; in a target city, we select new locations expected to improve traffic prediction, and we then commissioned new field measurements at those locations at our expense. The resulting data led to an improvement in traffic volume estimation accuracy across different fidelities.
Inferring network-wide traffic states from sparse observations with high accuracy and trustworthy uncertainty quantification is essential for intelligent transportation systems, yet it remains challenging due to the underdetermined nature of the problem, multifaceted disturbances in sensing networks, and the inherent conflicts among multiple inference sub-tasks when modeled jointly. We propose the Task-Aware Attentive Neural Process (TA-ANP), a unified probabilistic framework for resilient and trustworthy global traffic state inference (GTSI) by fusing floating car data (FCD) with sparse fixed-detector measurements. By casting GTSI as a stochastic process, TA-ANP leverages the meta-learning properties of neural processes to adapt rapidly to changes in sensing configurations without retraining. A task-aware multi-query attention module with distinct spatiotemporal inductive biases is introduced to jointly handle three GTSI sub-tasks, while mitigating cross-task interference. For uncertainty quantification, we combine neural processes with Monte Carlo Dropout to capture both aleatoric and epistemic uncertainty. To support metropolis-scale evaluation, we construct the Metropolitan Multi-Source Traffic Dataset (MMTD), integrating fixed-loop sensor measurements, FCD statistics, and OpenStreetMap road-network data over an urban network of 2,371 road segments. Experiments on MMTD show that TA-ANP achieves state-of-the-art performance across all sub-tasks under deterministic and probabilistic metrics. The resulting well-calibrated uncertainties enable more efficient fixed-sensor placement with fewer sensor deployments. Under a Damage-Repair-Addition sensing lifecycle, TA-ANP demonstrates superior resilience in terms of disturbance absorption, performance recovery, and adaptability to unseen sensing configurations.