Organizations: Dept. of Design & Manufacturing, Indian Institute of Science, Bangalore · Dept. of Mechanical Engineering, Indian Institute of Science, Bangalore
Abstract
In stream finishing, the wear experienced by a workpiece depends strongly on its orientation within the rotating abrasive media. Determining suitable orientations to achieve uniform wear requires evaluating the wear-rate field over all feasible orientations. Although the discrete element method (DEM) accurately resolves particle interactions, simulating hundreds of feasible orientations for a new geometry is computationally expensive. We present an uncertainty-guided surrogate framework that predicts, directly from geometry, the three fields governing erosion: per-triangle normal impact velocity, tangential impact velocity, and particle impact flux. These fields are combined through the Finnie wear model to reconstruct the wear-rate distribution. The surrogate employs a deep ensemble whose disagreement estimates epistemic uncertainty, enabling an active-learning strategy that selectively performs DEM simulations for the most uncertain orientations. Trained using only 13% of the 696 feasible orientations, the surrogate achieves Spearman rank correlations of 0.93, 0.89, and 0.93 for the normal impact velocity, tangential impact velocity, and particle impact flux, respectively. Moreover, the predicted uncertainty is well calibrated, reliably anticipating prediction error and the fidelity of the reconstructed wear field, which matches DEM with a Spearman rank correlation of up to 0.97 for low-uncertainty orientations and degrades in a controlled manner as uncertainty increases.
A flow surrogate validated on a simple regime is often taken as evidence that the approach will carry to a richer one. We test this assumption on two transient flows under time-varying boundary conditions emulating the process startup: the three-dimensional slurry film in chemical-mechanical planarisation (CMP), a core semiconductor-manufacturing process, and the two-dimensional Karman vortex street (KVS) behind a cylinder. Eight surrogate models are compared on one shared evaluation pipeline, differing in whether they learn the full field or a latent representation, and whether they predict trajectories in one shot or step by step. No single architecture wins both regimes. On the film, a one-shot full-field model reconstructs the process-relevant cumulative wall shear stress to 3.2% relative error. On the wake, a latent autoregressive DeepONet retains 96% of the shedding power that direct and one-shot models damp to almost zero. The deciding axis is the treatment of time. The self-sustained wake requires the phase memory that autoregressive feedback provides, while the boundary-driven film rewards a direct map. Pointwise RMSE picks the wrong model in both regimes, so the evaluation scores five physical questions instead, the field, its structure, invented motion, amplitude, and timing. The trained surrogates answer queries 103 to 104 times faster than the finite-element solver, but the offline cost of the training simulations means they pay off from the first query beyond the training set for CMP and the third for the KVS. The choice of surrogate should follow the dynamical character of the target flow, and its validation should use failure-mode-resolved metrics, since neither the winning architecture nor its validation transfers.
Directed energy deposition (DED) produces complex thermo-mechanical responses that can lead to distortion and reduced dimensional accuracy of a manufactured part. Thermo-mechanical finite element simulations are widely used to estimate these effects, but their computational cost and the complexity of accurately capturing DED physics limit their use in design iteration and process optimization. This paper introduces FLARE (Field Prediction via Linear Affine Reconstruction in wEight-space), a data-efficient surrogate modeling framework for predicting post-cooling displacement fields in DED from geometric and process parameters. We develop a predefined-geometry DED simulation workflow using an open-source finite element framework and generate a dataset of simulations with varying geometry, laser power, and deposition velocity. Each simulation provides full-field displacement, stress, strain, and temperature data throughout the manufacturing process. FLARE encodes each simulation as an implicit neural field and regularizes the corresponding neural-network weights so that they follow the affine structure of the input parameter space. This enables prediction of unseen parameter combinations by reconstructing network weights through affine mixing of training examples. On this DED benchmark, the method shows improved accuracy compared to baseline methods in both in-distribution and extrapolation settings. Although the present study focuses on DED displacement prediction, the proposed affine weight-space reconstruction framework offers a promising approach for data-efficient surrogate modeling of physical fields.
Deep learning surrogates for CFD flow-field prediction often rely on large, complex models, which can be slow and fragile when data are noisy or incomplete. We introduce FlowForge, a staged local rollout engine that predicts future flow fields by compiling a locality-preserving update schedule and executing it with a shared lightweight local predictor. Rather than producing the next frame in a single global pass, FlowForge rewrites spatial sites stage by stage so that each update conditions only on bounded local context exposed by earlier stages. This compile-execute design aligns inference with short-range physical dependence, keeps latency predictable, and limits error amplification from global mixing. Across PDEBench, CFDBench, and BubbleML, FlowForge matches or improves upon strong baselines in pointwise accuracy, delivers consistently better robustness to noise and missing observations, and maintains stable multi-step rollout behavior while reducing per-step latency.