ErgoSurf: Ergodic Control for the Coverage of Unknown Surfaces
Authors: Stefan Schneyer, Timo Bachmann, Maged Iskandar, Korbinian Nottensteiner, Alin Albu-Schäffer, Freek Stulp, João Silvério
Abstract
Contact-centric tasks on surfaces, ranging from inspection and cleaning to sanding and polishing, require robots to systematically cover the surface while maintaining stable contact. Ergodic control generates trajectories that spend time at a location proportional to a desired, task-specific spatial distribution, enabling efficient information gathering and coverage. However, traditional ergodic control methods rely on prior knowledge of surface geometry or require a vision sensory input to scan the geometry beforehand, limiting their applicability in real-world scenarios with unknown or dynamic environments. This paper introduces a novel online ergodic control framework that achieves systematic surface coverage while simultaneously reconstructing unknown surface geometry. We employ a Gaussian Process Implicit Surface (GPIS) model that learns global surface geometry from intrinsic tactile sensing during execution. For efficient online planning, we approximate the surface locally using point clouds sampled from tangent planes at observed contact points and iteratively fit them to the Gaussian Process. This approximation simultaneously serves as the sampling domain for both the target and the coverage distributions. We employ a heat-diffusion analogy to compute potential fields that guide ergodic exploration, translating spatial coverage objectives into smooth robot trajectories. We demonstrate our framework through simulation and real-robot experiments, validating simultaneous ergodic coverage and online surface geometry learning with reconstruction errors approaching the ground truth.
In this work, we address the problem of multi-robot adaptive coverage, where teams of robots perform dynamic sampling by continuously adjusting their positions to collect data in an environment. This task can be challenging, particularly when robots must be efficiently allocated to new sampling locations over time. Ergodic search methods optimize robot trajectories by ensuring that the robots' time-averaged spatial distribution aligns with the spatial distribution of environmental information. While these methods promote effective exploration provided a target distribution, they often fail to account for unknown prior distributions of the environment. To overcome this limitation, we propose an adaptive coverage strategy that utilizes real-time feedback from an environmental model to adjust robot sampling behavior in response to unknown conditions. Our approach enhances traditional ergodic trajectory optimization by constructing a target spatial information distribution based on parametric models of the environment, which are updated online. This strategy assumes that the environment is either static or changes slowly compared to the robot's motion. Our framework allows robots to dynamically prioritize regions of high interest, improving coverage efficiency, synthesizing effective control policies for individual agents, and optimizing resource use in settings with unknown prior distributions. We validate our approach through simulations, demonstrating its effectiveness in enhancing coverage and resource allocation.
In robotics, a common challenge in imitation learning is the mismatch between training and deployment conditions, caused, for example, by environmental changes or imperfect observation and control. When a robot follows a nominal trajectory under such mismatch, it may become stuck and fail to complete the task. This calls for adaptive online exploration strategies that remain grounded in demonstrations. To this end, we propose an adaptive ergodic imitation approach that constructs a target distribution from the geometry of the retrieved demonstrations and uses it to generate trajectories that adaptively interpolate between tracking and exploration. Our method extends ergodic control beyond its traditional role in area-coverage and search by incorporating demonstrations into a retrieval-based receding-horizon framework for adaptive imitation.
Autonomous robotic exploration in remote and extreme environments allows scientists to model complex transport phenomena and collective behaviors described by continuously deforming flow fields. Although these environments are naturally modeled as time-varying domains, most adaptive exploration methods assume static environments and fail to provide adequate coverage or satisfy any formal guarantees. This is especially the case in oceanography where autonomous underwater systems (UxS) have highly restrictive compute and payload requirements that necessitate path planning methods that yield robust data collection strategies in open-loop and underactuated settings. In this work, to address the aforementioned issues, we propose to formulate adaptive search as an ergodic coverage problem and investigate certifying coverage in the ergodic sense over evolving domains with flow-induced dynamics. We expand upon recent work demonstrating maximum mean discrepancy (MMD) as a functional ergodic metric, and derive a flow-adaptive formulation that explicitly accounts for domain evolution within the coverage objective. We show that this approach preserves ergodic coverage guarantees in ambient flows and enables effective exploration in under-actuated, and even open-loop planning settings by integrating environment dynamics. Experiments validate that our method generalizes to diverse spatiotemporal processes including ocean exploration, and tracking human and cattle movement. Physical experiments on aerial and legged robotic platforms validate our ability to obtain ergodic coverage in non-convex, flow-restricted environments while respecting robot dynamics.