Organizations: CRAN, UIR · Université de Lorraine, INRIA, CNRS, LORIA, Nancy, F-54000, France · International University of Rabat, Rabat, 11103, Morocco · LARSEN · LORIA, ISM · Aix-Marseille Université, CNRS, ISM, Marseille, F-13009, France · CRAN · Université de Lorraine, CRAN, Nancy, F-54000, France
Abstract
Cable-driven parallel robots (CDPRs) present diverse configurations and complex control challenges, which can be addressed by deep reinforcement learning (DRL) by learning their nonlinear dynamics. However, DRL methods often require extensive training time, and the resulting policies do not generalize well to different robot configurations or varying numbers of actuators. In this article, we introduce a novel DRL approach for controlling CDPRs that does not depend on the specific robot configuration. Our method trains an actuator-level policy that controls each motor to achieve its target cable length, in contrast to conventional DRL approaches that learn to control the entire robot to reach a desired end-effector position. To the best of our knowledge, this is the first work to apply DRL to control CDPRs using an actuator-level policy. This approach offers two main advantages: (i) a single shared policy can be applied to any CDPR configuration, regardless of actuator count, and (ii) reliance on inverse kinematics, avoiding the more challenging forward kinematics problem. Training is performed in simulation, and the learned policy is successfully transferred to a real CDPR. Experimental results show that the actuator-level policy (ALP) surpasses traditional reinforcement learning methods in both robustness and precision. We further control a real 8-motor CDPR with 3D motion using a policy trained on a simulated 4-motor planar CDPR operating in 2D. This illustrates that the proposed method is applicable to any CDPR configuration, independent of actuator number or placement.
Cable-Driven Parallel Robots (CDPRs) are a type of parallel mechanism in which cables are used as actuators. Due to the two levels of redundancy and numerous constraints within the CDPR actuation, joint and operational spaces (together known as the tri-space), tracking a given trajectory in the operational space while satisfying constraints in tri-space simultaneously is challenging. To the best of the authors' knowledge, there does not exist any tri-space control framework, which is robust, effective, and directly applicable to several architectures of redundantly actuated CDPRs. This paper proposes a tri-space control framework that combines Reactive Control (RC) and Iterative-Learning Control (ILC) to perform repetitive tasks in the operational space. The framework allows the tracking of operational space trajectories online with feasible cable forces, while avoiding undesirable situations such as cable-link interference, joint interference, and loss of manipulability. On the other hand, by finding an optimal parameter in the null space using a novel parameterization of a null space vector, the performance can be improved through ILC when the task is repeatedly executed. Simulation and hardware results on various Multilink Cable-Driven Robot (MCDRs) and Hybrid Cable-Driven Robots (HCDRs) show that the proposed tri-space control framework can be conveniently and effectively applied to the real-time control of different CDPRs.
Steering Cable-Driven Parallel Robots (CDPRs) beyond their Wrench-Feasible Workspace (WFW) augments their capabilities in challenging scenarios such as during aggressive maneuvers or following a cable failure. In this context, although the determination of cable tensions is a well-studied topic, only a few approaches address these scenarios. Therefore, this paper introduces an extended version of the Analytic Center method as a criterion for selecting cable tensions outside the WFW while maintaining differentiability and including non-linear constraints. Notably, the proposed method maintains continuous and differentiable tension profiles, ensures fast real-time convergence to a unique solution, and, in contrast to other slack-based formulations, relegates wrench errors to a negligible area of the WFW. Its superiority in terms of smoothness and wrench error is confirmed via Pareto dominance with respect to the leading state-of-the-art method. Lastly, the effectiveness of the method is demonstrated through numerical experiments.
Domenico Dona', Vincenzo Di Paola, Alberto Trevisani +1
Robust deployment of deep reinforcement learning (DRL) policies on real robots remains challenging due to discrepancies between simulation and real-world dynamics. We address this issue in the context of maneuvering with double-Ackermann-steering mobile robots, which introduce additional constraints due to their non-holonomic nature. Building upon the DRL framework ManeuverNet, we extend its objective from position control to full pose control, resulting in a more challenging task. We further investigate the impact of actuation-related uncertainties on policy transfer. The use of simplified actuation models during training of the extended policy can lead to poor generalization, shown by a success rate drop from 100% in PyBullet to 25% in Gazebo under stricter evaluation conditions. To address this limitation, we adopt a sim-to-sim-to-real approach, where actuation effects observed in Gazebo are incorporated into the PyBullet training environment. Using multi-environment DRL with SAC and CrossQ, we learn policies that remain robust despite modeling inaccuracies. This approach can significantly reduce the performance gap across simulators, achieving up to 92% success rate in Gazebo and maintaining 69% under stricter thresholds, with successful transfer to a real robot without additional tuning.