Hybrid Residual Reinforcement Learning for Contact-Rich Robotic Book Insertion

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

Reinforcement learning-based control policies have been frequently demonstrated to be more effective than analytical techniques for many manipulation tasks. Commonly, these methods learn neural control policies that predict end-effector pose changes directly from observed state information. For tasks like inserting delicate connectors which induce force constraints, pose-based policies have limited explicit control over force and rely on carefully tuned low-level controllers to avoid executing damaging actions. In this work, we present hybrid position-force control policies that learn to dynamically select when to use force or position control in each control dimension. To improve learning efficiency of these policies, we introduce Mode-Aware Training for Contact Handling (MATCH) which adjusts policy action probabilities to explicitly mirror the mode selection behavior in hybrid control. We validate MATCH's learned policy effectiveness using fragile peg-in-hole tasks under extreme localization uncertainty. We find MATCH substantially outperforms pose-control policies -- solving these tasks with up to 10% higher success rates and 5x fewer peg breaks than pose-only policies under common types of state estimation error. MATCH also demonstrates data efficiency equal to pose-control policies, despite learning in a larger and more complex action space. In over 1600 sim-to-real experiments, we find MATCH succeeds twice as often as pose policies in high noise settings (33% vs.~68%) and applies ~30% less force on average compared to variable impedance policies on a Franka FR3 in laboratory conditions.

Training non-prehensile manipulation policies in contact-rich settings is a core challenge in robotics. While Reinforcement Learning (RL) has demonstrated its strength in such settings, it may struggle to sufficiently explore and discover complex manipulation strategies. To address this, we combine two basic ideas: First, designing appropriate reset strategies (the start state distribution of episodes) has shown promise in improving RL exploration and effectiveness. Second, while model-based approaches to finding trajectories through manipulation are hard, recent work showed that model-based approaches to sampling states on constrained manifolds can be highly efficient. Based on these observations, we propose a novel state sampler that boosts the performance of goal-conditioned RL in complex contact-rich manipulation tasks. Our sampler explicitly takes into account the structure of contact in order to provide a rich covering of diverse contact modes. By combining constrained sampling resets with projected interpolation and curriculum learning, our novel approach outperforms RL without constrained sampling and alternative reset methods, and effectively trains universal, non-prehensile, and dynamic manipulation policies in contact-rich settings. See https://www.user.tu-berlin.de/mtoussai/26-CSRL/ for supplementary material.