MarineCraft: Enabling Rapid Prototyping of Underwater Robots via Modular Construction

Underwater robotics has advanced significantly over recent decades. however, the development of miniaturized underwater robots remains limited by low energy densities of traditional power sources. Nature offers compelling solutions-organisms like mantis shrimps and fleas utilize latch-mediated spring actuation (LaMSA) systems that achieve rapid movements through a decoupled energy storage and release mechanism. Despite extensive studies of LaMSA, replicating such rapid, asymmetric actuation within simple, compact structures remains challenging. In this work, we introduce a bioinspired, soft bistable actuator with an integrated latch mechanism that enables asymmetric energy input and release using a single motor. Coupled with fin structures, this design facilitates efficient underwater propulsion and maneuverability. Experimental results demonstrate stable periodic flapping, precise steering, and a maximum thrust of 0.528 N, impulse of 0.147 Ns, and vertical displacement of 30 mm. By modulating fin angles, the robot achieves versatile motions, including vertical ascent, diagonal forward movement, and lateral translation. This study presents a novel, energy-efficient approach for controlling motion in compact underwater robots, paving the way for advanced biomimetic designs with potential applications in exploration, environmental monitoring, and inspection.

A Remotely Operated Vehicle (ROV) is a tethered underwater robot used for tasks like inspection and intervention. While essential tools for underwater science, the high cost of commercial ROVs and a persistent gap between mechanically capable platforms and those with integrated intelligence create a significant barrier to access. HyDRA Scorpion differs from conventional systems by addressing these challenges, integrating an advanced, AI-driven perception stack with in-situ measurement capabilities onto a low-cost, locally manufacturable platform. The system combines 4-DoF maneuverability, dual manipulators, and a custom pressure-tested housing. Experimental results validate the system's robustness and performance. Leak-free operation was confirmed through prolonged pressure testing of the electronics housing to 4 bar, equivalent to the pressure of a 304.8-meter water depth approximately in a simulated environment, with no moisture ingress detected. The vehicle also demonstrated stable station-keeping, maintaining its position within a tight tolerance of $$\pm$0.15$ meters under external disturbances. The onboard AI module achieved underwater object detection mean Average Precision (mAP) of 0.89 with real-time inference, length and 3D-mapping based distance measurement. Also, 4-DoF manipulator arm can grip and maintain dual-function manipulator feature which support 360 degree tangle-free rotation.

We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.