Enhancing generalization in endwall film cooling prediction: Incorporating the superposition principle into transformer-based neural operators

To enable flexible and rapid aerodynamic performance evaluation in turbomachinery design, this paper proposes a panoramic performance prediction framework. Unlike most previous prediction models that directly predict the objective functions of interest, our approach first predicts the basic parameters of the Navier-Stokes equations, such as temperature, pressure, and density. Utilizing these basic physical quantities, it subsequently predicts key performance parameters of the turbine stage meridian plane. By adopting this methodology, our proposed panoramic performance prediction framework functions similarly to a CFD simulator, capable of predicting various objective of interest to the designers. To enhance prediction accuracy, a transformer-enhanced neural operator (TNO) is introduced within this framework. Using the Rotor 37 blades as a reference, the proposed TNO is trained to predict the performance of a transonic compressor blade in the meridian plane. The TNO can accurately predict total quantities such as isentropic efficiency, mass flow, and distributions of total pressure ratio. Remarkably, the prediction error of TNO is observed to be smaller than that of state-of-the-art deep learning operators such as the FNO and DeepONet. Furthermore, the TNO is applied to downstream tasks, including sensitivity analysis and optimization of various objective functions. The results confirm that the TNO can operate almost like a CFD simulator, while reducing the computational cost of downstream tasks by four orders of magnitude. The effectiveness and reliability of the proposed TNO for solving different kinds of downstream tasks have been well demonstrated.

Accurate modeling of the divertor temperature field is essential for preventing material melting and damage and for extending the service life of fusion devices. However, conventional numerical methods, such as the Finite Element Method (FEM), are computationally expensive and therefore unsuitable for real-time applications. Therefore, a fast and generalizable method is required for real-time reconstruction of the divertor temperature field and subsequent real-time control. To address the above issue, we propose a Physics-aware Neural Operator Transformer (PNOT) to characterize the spatiotemporal evolution of the divertor temperature field. It models boundary heat-flux relations as a structured graph and employs graph attention to explicitly capture spatial physical dependencies. Inspired by physics-aware attention, we further develop a physics-aware neural operator module to aggregate query points with similar physical conditions via slicing and model heat diffusion, while a gradient-constrained Sobolev regularization loss enforces consistency between function values and their derivatives. Experimental results show that these physical constraints improve prediction accuracy while preserving physical consistency. The source code of this paper will be released on https://github.com/Event-AHU/OpenFusion

Accurate modeling and forecasting of power transformer thermal behavior are critical for reliability, asset lifetime, and optimized power system operation. Numerical approaches such as finite element methods (FEM) and computational fluid dynamics (CFD) offer high fidelity but are computationally expensive, require complex mesh generation, and are often impractical for real-time or large-scale applications, particularly when transformer geometries are unknown. Lumped-parameter thermal models are more practical but depend on transformer-specific thermal constants and may fail to capture dynamic responses under varying operating and environmental conditions. Purely data-driven machine learning methods, including artificial neural networks, convolutional neural networks, and long short-term memory (LSTM) networks, have shown success in forecasting transformer temperatures but typically require large volumes of high-quality training data and may produce physically inconsistent or uninterpretable results. This paper develops a physics-aware Neural Ordinary Differential Equation (Neural ODE) framework for forecasting transformer thermal behavior from real-world time-series data. Neural ODEs model system dynamics in continuous time, providing smooth trajectory prediction and a natural representation of continuously evolving thermal dynamics. A key contribution is the integration of simplified heat-transfer equations directly into the Neural ODE formulation. The model is evaluated across datasets from fifteen transformers in different regions of Norway with varying designs and cooling mechanisms. The results demonstrate that the developed Neural ODE framework provides a standardized, physics-aware, and robust forecasting approach for heterogeneous transformer units.