Event Cameras for Melt-Pool Monitoring in Additive Manufacturing: A Benchmark and a Cross-Machine Transfer Analysis

Event cameras asynchronously report brightness changes with microsecond-level temporal resolution, but real event data remain difficult to collect at scale because specialized sensors, careful synchronization, and task-specific annotations are required. Event-camera simulation is therefore important to event-based vision tasks. Most practical simulators build on contrast-threshold event generation, some with additional filtering, stochastic noise, or hand-tuned sensor parameters. While effective, such formulations often simplify the temporal structure produced by the lifecycle of each pixel, which can distort event timing and weaken downstream transfer. We introduce FracEvent, an event simulator that models this pixel-level lifecycle with fractional-relaxation voltage dynamics. Given a log-intensity trajectory, FracEvent drives a compact stack of relaxation modes, combines their responses into a voltage state, emits ON/OFF events by localizing threshold crossings on the continuous voltage trajectory, and updates the reference while retaining the underlying memory modes. This retained state links residual voltage response to later event timing. We evaluate FracEvent through event-stream comparison and downstream transfer on image reconstruction and optical flow estimation. Across multiple datasets, FracEvent improves the temporal structure of generated events and achieves stronger downstream-transfer results than competing simulator baselines, showing its practical value for event-camera simulation.

Event-based vision is becoming an increasingly important sensing paradigm for robotics, yet its adoption remains limited by sensor availability and the lack of integrated simulation tools for modern robotics platforms. This paper presents EsaacSim, a multimodal event camera add-on for NVIDIA Isaac Sim that enables online simulation of configurable event cameras with grayscale and Bayer RGGB event generation. The framework supports multiple event camera resolutions and provides synchronized RGB, APS, event, depth, and IMU outputs through native ROS2 interfaces. A motion-guided frame-gap synthesis strategy further increases the effective temporal resolution while preserving compatibility with the Isaac Sim rendering pipeline. Experimental evaluation demonstrates synchronized multimodal simulation across representative robotic scenes and efficient online performance over five event camera resolutions at effective event rates from 240 to 960Hz. Event stream generation requires 6.98--27.28ms for grayscale events and 7.58--29.16ms for Bayer RGGB events while using less than 400MB of additional GPU memory on an NVIDIA RTX~4060 GPU. These results show that EsaacSim enables supports online multimodal event-camera simulation for robotics research and synthetic data generation. We release an early version of the simulator and report its current architecture and performance.

Event cameras have recently shown promising capabilities in instantaneous motion estimation due to their robustness to low light and fast motions. However, computing wide-baseline correspondence between two arbitrary views remains a significant challenge, since event appearance changes substantially with motion, and learning-based approaches are constrained by both scalability and limited wide-baseline supervision. We therefore introduce the first event matching model that achieves cross-dataset wide-baseline correspondence in a zero-shot manner: a single model trained once is deployed on unseen datasets without any target-domain fine-tuning or adaptation. To enable this capability, we introduce a motion-robust and computationally efficient attention backbone that learns multi-timescale features from event streams, augmented with sparsity-aware event token selection, making large-scale training on diverse wide-baseline supervision computationally feasible. To provide the supervision needed for wide-baseline generalization, we develop a robust event motion synthesis framework to generate large-scale event-matching datasets with augmented viewpoints, modalities, and motions. Extensive experiments across multiple benchmarks show that our framework achieves a 37.7% improvement over the previous best event feature matching methods. Code and data are available at: https://github.com/spikelab-jhu/Match-Any-Events.