Adaptive Bendpoint Formation in Octopus-Inspired Soft Continuum Arms

In tendon driven continuum manipulators (TDCMs), reconfiguring the tendon routing enables tailored spatial deformation of the backbone. This work presents a design in which tendons can be rerouted either prior to or after actuation by actively rotating the individual spacer disks. Each disk rotation thus adds a degree of freedom to the actuation space, complicating the mapping from a desired backbone curve to the corresponding actuator inputs. However, when the backbone shape is projected into an intermediate space defined by curvature and torsion (C-T), patterns emerge that highlight which disks are most influential in achieving a global shape. This insight enables a simplified, sequential shape-matching strategy: first, the proximal and intermediate disks are rotated to approximate the global shape; then, the distal disks are adjusted to fine-tune the end-effector position with minimal impact on the overall shape. The proposed actuation framework offers a model-free alternative to conventional control approaches, bypassing the complexities of modeling reconfigurable TDCMs.

The elephant trunk is a dexterous and versatile manipulator whose performance is still unmatched in robotics. In previous works, modularity was prioritized and relatively small-scale continuum robots were built. We take the natural proboscis of the Loxodonta africana species as a model and propose a different design approach which favors structural continuity and dynamic properties that plausibly emulate those of the natural trunk, while conferring high adaptability to the environment and humans. Instead of targeting prescribed behaviors, we show that a biomimetic design based on the macroscopic properties of the natural system enables elephant-like movements and grasping. We build by 3D printing an 85 cm long, compliant, tapered, volumetrically tessellated continuum arm, which is combined with tendon-driven actuation mimicking the longitudinal and oblique muscles of the natural model. We demonstrate whole-body grasping of objects having different shapes and dimensions and discuss a comparison to the biological trunk highlighting aspects of both biology and robotics.

Soft continuum robots require embedded sensing for proprioception and contact detection, yet integrating sensors into sparse, highly deformable architected structures remains challenging. We present a model-based strategy that decouples proprioceptive and contact signals from a common set of fluidic pressure sensors embedded in a soft architected segment. Each segment of the Innervated Trimmed Helicoid (ITH) contains six air channels routed in a localized zigzag pattern along the circumference. With only three principal kinematic degrees of freedom (axial compression, bending in x, bending in y), the six pressure readings form an overdetermined system. A piecewise constant curvature model maps pressures to shape, and Huber regression identifies outlier channels whose residuals indicate external contact. On a single ITH segment, this approach achieves proprioceptive shape estimation with a relative bending error of 0.11 +/- 0.02 and a contact detection rate of 97% across 178 trials. We integrate eight ITH segments into Air-Helix, a tendon-driven soft continuum manipulator, and present exploratory whole-arm demonstrations that include tactile teaching by demonstration, admittance-controlled force regulation, and tactile object reconstruction. The results suggest that localized fluidic innervation combined with model-based redundancy resolution is a practical path toward concurrent proprioception and contact sensing in architected soft robots.