Organizations: School of Computer Science and Engineering, Southeast University, Nanjing, China · School of Information Technology, Monash University, Subang Jaya, Malaysia · Department of Electronic & Computer Engineering, Hong Kong University of Science & Technology, Hong Kong, China · Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen, China
Vision-language-action (VLA) models enable robots to perform tasks specified through natural-language instructions, but their large weight footprint challenges deployment on memory-constrained onboard platforms. Ultra-low-bit quantization reduces this footprint, yet preserving task performance and controlling weight recovery costs remain challenging. We propose Action-Guided Quantization, which combines action sensitivity with a measured proxy for weight recovery cost to allocate matrix bitwidths under storage budgets. Per-channel calibration compensates for quantization error, while a uniform bitwidth within each matrix preserves regular layouts. Bit-dependent grouped lossless coding reduces resident weight storage, and block-wise recovery limits temporary buffers. On LIBERO, AGQ achieves 92.7% task success at W3, exceeding AWQ and GPTQ by 1.2 and 3.7 percentage points, respectively, and retains 70.5% success at W2.5. An asymmetric configuration, denoted W1.5∗, uses W4 vision weights and a parameter-weighted average of 1.5 bits for language weights. With lossless coding, it achieves 6.10× complete-model compression relative to BF16 while retaining 25.5% task success. Code and experimental results are available at https://github.com/Qiuxu00/AGQ
Figures & tables
Fig. 1: Low-bit quantization of VLA models. Lines show task success rates (left axis) for Ours and Baseline (QVLA), while bars show target-weight compression ratios relative to BF16 (right axis). QVLA reports 0% at W2.5; lower-bit results are zero-valued extensions for visualization. W1.5*: W4 vision + W1.5 language.
Fig. 2: Overview of AGQ: (a) VLA architecture; (b) action-guided bit allocation incorporating a measured proxy for weight recovery cost; (c) per-channel quantizer calibration; and (d) grouped lossless coding and block-wise execution.
Budget
λ
Total (428)
W1
W2
W3
W4
W2.5
0
54 (23+31)
107 (67+40)
189 (63+126)
78 (51+27)
0.25
28 (8+20)
142 (91+51)
192 (55+137)
66 (50+16)
0.5
19 (6+13)
150 (94+56)
199 (51+148)
60 (53+7)
0.75
14 (5+9)
155 (96+59)
199 (45+154)
60 (58+2)
1
7 (5+2)
167 (95+72)
196 (47+149)
58 (57+1)
TABLE I: Matrix-wise bit allocation with supporting probe analysis
Fig. 3: W2.5 success rates across four suites and overall. Random allocation also undergoes calibration. QVLA values are from ActQuant [ 7 ] .
Model
Method
Vision+ LLM BPW
Success Rate (%)
Spatial
Object
Goal
Long
Avg.
Δ
Baseline
16.0
97.6
98.4
96.8
95.1
96.9
0.0
4.0
94.6
98.6
96.8
94.4
96.1
−0.8
3.0
86.4
98.0
90.2
91.4
91.5
−5.4
AWQ
2.0
0.0
0.0
0.0
0.0
0.0
−96.9
4.0
90.8
98.8
96.4
92.6
94.6
−2.3
TABLE II: Closed-loop task success rates (%) on LIBERO
Model
Method
Vision+ LLM BPW
Model Size (GB)
Peak GPU Mem. (GB)
Latency (ms)
BF16
16.0
15.457 (1.00 × )
16.082
187.3
4.0
4.680 (3.30 × )
5.643
249.3
3.0
3.774 (4.10 × )
4.727
254.4
2.5
3.327 (4.65 × )
4.280
245.2
2.0
2.878 (5.37 × )
3.828
243.6
Ours
1.5 ∗
2.656 (5.82 × )
3.603
250.5
TABLE III: Storage and inference efficiency of OpenVLA-OFT
Vision-Language-Action (VLA) models exhibit remarkable action generation for embodied intelligence, but their heavy compute make deployment on edge platforms impractical. Aggressive, sub-4-bit weight quantization is the natural solution, yet existing post-training quantization (PTQ) methods suffer severe performance degradation in this regime. To address this, we introduce ActQuant, an action-guided mixed-precision PTQ framework that operates in two stages: (1) an inter-tensor bit allocator that assigns each weight matrix a single bit-width based on how much it contributes to predicting the agent's actions; (2) an intra-tensor scale optimizer tunes per-block quantization scales using action-aware curvature, so that dynamic range is concentrated on the weights most influential for control. To deliver the on-device benefits of our aggressive quantization, we further introduce OmniModel.cpp, an agentic conversion pipeline that ports architectures into a native C/C++ runtime with efficient low-bit kernels. We evaluate ActQuant both in simulation and on a real-world 6-DoF UR3 arm, with all models deployed through OmniModel.cpp. On the LIBERO benchmark, ActQuant is the only method that operates at or below 3 bits-per-weight, retaining 95.0% on OpenVLA-OFT and 94.8% on π0.5. Pushed further, ActQuant reaches 2.5 bpw at 90.1% on OpenVLA-OFT, compressing the backbone from 14.3 GB to 2.7 GB (5.3×). On the physical UR3 arm, π0.5 quantized with ActQuant retains the baseline's success rate while reducing the memory footprint by 2.5×.
Arash Akbari, Arman Akbari, Masih Eskandar +11
1Northeastern University · University of Georgia · 3Cisco Systems
Low-bit vision-language-action inference must reduce observation-to-action latency while preserving robot behavior. We present FoldQuantVLA, a post-training quantization framework that carries a consistent activation representation through calibration, weight rounding, and native integer execution. It combines channel scaling and block Hadamard transforms with dynamic per-token quantization, without policy retraining. Custom TensorRT plugins execute projections in both the language backbone and iterative action expert with four-bit weights and activations (W4A4) on Ada GPUs and Jetson AGX Orin. Evaluation spans LIBERO, SimplerEnv, and two robot platforms. Across three GR00T checkpoints and π0.5, W4A4 achieves 1.20 to 1.33× speedups over floating-point TensorRT on Orin and 1.25 to 1.52× on desktop. Retaining language attention-output and feed-forward down projections at eight bits (W8A8) improves held-out action fidelity on all four checkpoints. Across four real-robot tasks, this configuration raises observed GR00T N1.7 success from 80.0% with uniform W4A4 to 92.5% over 80 trials per configuration, with a measured additional Orin latency of 1 ms.
Hung T. Ho, Khanh D. Nguyen, Quang D. Nguyen +5
VinRobotics, Vietnam · AICV Lab, EECS Department, University of Arkansas · School of Advanced Manufacturing and Robotics, Peking University, China +2
Vision-language-action (VLA) models unify perception, language, and control for embodied agents but face significant challenges in practical deployment due to rapidly increasing compute and memory demands, especially as models scale to longer horizons and larger backbones. To address these bottlenecks, we introduce QuantVLA, a training-free post-training quantization (PTQ) framework that, to our knowledge, is the first PTQ approach for VLA systems and the first to successfully quantize a diffusion transformer (DiT) action head. QuantVLA incorporates three scale-calibrated components: (1) a selective quantization layout that integerizes all linear layers in both the language backbone and the DiT while keeping attention projections in floating point to preserve the original operator schedule; (2) attention temperature matching, a lightweight per-head scaling mechanism that stabilizes attention logits and is folded into the dequantization scales at inference; and (3) output head balancing, a per-layer residual interface calibration that mitigates post-projection energy drift. The framework requires no additional training, uses only a small unlabeled calibration buffer, and supports integer kernels for low-bit weights and activations while leaving the architecture unchanged. Across representative VLA models on LIBERO, QuantVLA exceeds the task success rates of full-precision baselines, achieves about 70% relative memory savings on the quantized components, providing a practical pathway toward scalable low-bit embodied intelligence under strict compute, memory, and power constraints.
Jingxuan Zhang, Yunta Hsieh, Zhongwei Wan +5
The Ohio State University · University of Michigan · City University of Hong Kong