FastAgent: A Physics-Aware FastFluent-to-Fluent Workflow for Rapid CFD Screening and Industrial Steam Dewaxing Design
Organizations: School of Materials Science and Engineering, Tsinghua University, Beijing, China · State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Deyang 618000, China · Dongfang Electric Corporation Dongfang Turbine Co., Ltd., Deyang 618000, China
Abstract
Industrial computational fluid dynamics (CFD) becomes costly when complex geometries, long transients and coupled physics must be evaluated across large design spaces. We introduce FastAgent, a physics-aware campaign controller built around FastFluent, a lightweight numerical engine for rapid physical screening. FastFluent supplies stage-specific fields and diagnostics; FastAgent allocates physical models, numerical resolution and simulation horizons by the active quantities of interest (QoIs), while returned Fluent discrepancies update subsequent decisions. Across six public CFD benchmark campaigns, the framework reduces normalised worst-QoI error by 5.68-99.14% and accelerates decision-relevant computation by factors of 1.53-15.36 relative to a matched Generic Agent control. Applied to high-pressure steam dewaxing in investment casting, FastAgent identifies nonuniform condensation heating as the dominant startup mechanism and separates rapid risk-window localisation from high-fidelity melt-completion confirmation. The rapid route requires 81.39% fewer cell-time updates than a fine-grid, small-time-step reference. Structural analysis localises fracture at the observed blade edge. Screening 131,072 outlet layouts and selectively evaluating candidates with Fluent and Abaqus identifies Sparse-6, which reduces simulated crack opening by 96.0% and connected crack extent by 66.7% relative to the Original design. These results demonstrate how rapid numerical evidence and adaptive fidelity control connect large CFD search spaces to mechanism-guided industrial design.
Figures & tables
| Case | Physical test | Agent/FastFluent decision | Key result | Supported conclusion |
|---|---|---|---|---|
| Laminar channel | Refinement and mass balance | Diagnose and repair the inlet before high-fidelity confirmation | RMS ; speedup | Numerical correction |
| Backward-facing step | Separated-flow reattachment | Screen three tiers and return a non-stationary result | acceleration; snapshot deviation | Rapid screening with diagnostic return |
| Heated channel | Blocked thermal transport | Correct porous mapping through front and dose monitors | Errors ; speedup | Stage-specific QoI transfer |
| Lid-driven cavity | Full-field confirmation | Transfer the velocity field and correct numerical settings | Ghia RMS ; speedup | High-fidelity full-field confirmation |
| Ghia cavity reproduction | – profiles | Screen nine candidates and confirm three | Mean RMS ; speedup | Discrepancy-driven correction |
| Schäfer–Turek cylinder | Unsteady wake at | Stop after consecutive multi-QoI criteria are satisfied | Strouhal error ; speedup | Adaptive confirmation |
Computational Fluid Dynamics
Computational fluid dynamics numerically models fluid motion, turbulence, heat and mass transport, and fluid–structure interactions.
See all 308 papers