cs.LGNov 4, 2026

Data-Driven Modeling of Molten Chloride Corrosion Using Static Test Data

Authors: Md Mahmudul Hasan Pathik

Organizations: Mechanics and Materials Lab, North Carolina State University, NC 27606 USA

Abstract

Molten chloride corrosion has been studied for decades, yet reliable prediction across different alloys, salts, and test conditions remains difficult. In this work, 291 static molten chloride corrosion experiments reported in the literature were compiled into a structured dataset and used to develop an interpretable machine-learning framework for corrosion-rate predictions. To better represent the differences in salt condition across studies, a Chloride Salt Preparation Index (CSPI) was introduced to bring the reported salt-treatment method, atmosphere control, and pre-exposure impurity condition on a common numerical scale. A blended tree-based ensemble provided the most consistent predictive performance, achieving a cross-validated R2R^2 of 0.85 and an MAE of 0.41 mg cm−2^{-2} day−1^{-1}. The graded CSPI retained more useful information than a simple purified/unpurified classification and emerged as the dominant model descriptor. Global sensitivity and SHAP analyses further identified exposure time, temperature, and alloy chemistry as important contributors to the model predictions, with several observed trends consistent with the established molten-chloride corrosion behavior. The conformal prediction intervals were well calibrated, providing an estimate of prediction uncertainty in addition to the point prediction. Overall, the framework demonstrates that historical corrosion data can support quantitative, interpretable, and uncertainty-aware prediction when experimental context is represented explicitly, while also highlighting where more consistent reporting and targeted experiments are needed to improve future molten-salt corrosion models.

Figures & tables

Appendix figures & tables4 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Aug 31, 2026

Generative artificial intelligence for reliable mechanistic reasoning for corrosion

Corrosion accounts for approximately 4% of global GDP, and reliable prediction is essential for timely mitigation. Machine learning effectively predicts corrosion rates from composition, microstructure, and environmental variables, but cannot explain the underlying mechanisms. A reliable approach in safety-critical materials engineering requires not only accurate retrieval but also mechanistically defensible reasoning, a capability that existing factuality metrics cannot assess. This work presents a domain-adapted retrieval-augmented generation framework for corrosion knowledge synthesis, demonstrated on magnesium alloy corrosion. Three open-weight language models (Llama-3.1-8B, Qwen-2.5-7B, Mistral-7B) are fine-tuned on 3,309 expert-verified question-answer pairs from 840 peer-reviewed papers and integrated with a hybrid dense-lexical retrieval pipeline. Retrieval augmentation produces Token F1 gains of 143-194%, with system faithfulness of 0.964 and context recall of 0.988. Blind external validation on newly published literature and in-house electrochemical data confirms trend-level generalisation. Reason Map, a proposition-graph framework, is further introduced; it independently constructs directed evidence graphs from generated answers and retrieved literature, enabling systematic detection of causal direction inversions and unsupported inferential leaps that flat factuality metrics cannot expose. The modular architecture can be applied across domains, offering a generalizable blueprint for trustworthy AI-assisted knowledge synthesis to circumvent corrosion, which can also be applied to other engineering domains.
Aug 28, 2026

What Will This Copper Look Like Later? Forecasting Surface Appearance and Rendering It as a PBR Material

Digital design requires predicting how a metal surface will look later in its oxidation; this paper presents such a pipeline for copper. Given a fixed-camera observation, the system forecasts appearance 10 accelerated units ahead and converts it into the albedo, normal, roughness and metallic maps a renderer consumes. Forecasting is evaluated as an authoring tool would use it, on a copper specimen the system has not observed: an entire recording is held out, so training and checkpoint selection use one specimen and the test set is the whole of a second, recorded on a different day and condition. Under this protocol a learned spatio-temporal model with a monotone oxidation state, the most accurate forecaster within a single recording, is less accurate than copying the last observed frame on an unseen specimen, in both directions, as are three further trained architectures. The only forecaster that transfers is a closed-form global color extrapolation with no trained parameters, improving on copy-last-frame by 13.4% and 50.6%, with a margin that increases with horizon to +16.7% and +55.5% at t+10. Two controls qualify this: correcting every frame for the photometric drift measured on a non-oxidizing reference region leaves both margins intact, ruling out uncontrolled exposure as their source, and a moving-block bootstrap over the 6 independent windows each recording contains separates the larger margin from zero but leaves the smaller one not individually significant. The mechanism is measured: a learned susceptibility map encodes where corrosion begins on the training specimen and misleads on a new one, whereas the global color trajectory is what specimens share. The pipeline therefore deploys the closed-form forecaster for unseen specimens and the learned model only for continuing one already observed. Code, splits, protocol and leakage audit are released.
Nov 3, 2026

SteelAgent: LLM-Orchestrated, Physics-Informed Steel Property Prediction with Audited Generalization and Calibrated Uncertainty

Steel property models can perform well on random test splits even when they extrapolate poorly to unfamiliar alloys. SteelAgent couples metallurgical descriptors and machine-learning models with a language-model interface for property prediction, uncertainty reporting and inverse design. We examine how the choice of held-out unit changes the conclusions drawn from SteelBench tensile-strength evaluations. For gradient boosting, pooled out-of-fold R2R^2 fell from 0.859 on a random split to 0.113 when steel families were held out. Empirical coverage of nominal 90% prediction intervals ranged from 91.0% under random splitting to 37.6% on held-out sources. The effect of physics-derived features depended on the evaluation. They increased gradient-boosting R2R^2 by 0.2534 in a 17-family holdout analysis and decreased it by 0.358 in a separate four-grade laboratory analysis. We report group-level errors and a synthetic regression experiment illustrating how calibration can deteriorate on held-out groups. These results motivate reporting the evaluation population alongside a property estimate or compliance score.