cs.LGNov 7, 2026

Dynamic State Estimation from Sparse PMUs via Physics-Informed Graph Neural Operators

Authors: Huy Hoang Le, Haoguang Wang, Christian Moya, Marcos Netto, Guang Lin

Organizations: School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907 USA · Department of Mathematics, Purdue University, West Lafayette, IN 47907 USA · Department of Electrical and Computer Engineering, New Jersey Institute of Technology, Newark, NJ 07102 USA

Abstract

This paper proposes a physics-informed graph neural operator for power system dynamic state estimation. From a sparse, intermittent measurement window at a few generator buses, the operator estimates the rotor-angle and speed trajectories of all machines, unmeasured ones included, in one forward pass. A graph-attention encoder processes the measurements, and the swing equations are imposed as a hard constraint or as a soft one with a learned correction that absorbs model errors. It is trained on simulated measurements, without state labels. With several phasor measurement units, masked training hides one from the input but keeps it in the loss. On four transmission systems, simulations show that the operator is the most accurate estimator that neither optimizes per scenario nor uses state labels, except on the smallest system at large model errors, where tuned Kalman smoothers are better. Networks trained on simulated states are more accurate on the two smallest systems but not on the 118-bus system, where the operator is faster and more accurate than hard-constrained moving-horizon estimation. Under model errors, it matches or outperforms an optimization-based benchmark at a fraction of its cost. The results hold for a detailed machine model with exact parameters seen only through voltage phasors.

Figures & tables

Explore similar work

Apr 3, 2026

Learning Without Adversarial Training: A Physics-Informed Neural Network for Secure Power System State Estimation under False Data Injection Attacks

Power System State Estimation (PSSE) converts geographically distributed measurements into the voltage magnitudes and phase angles needed for grid monitoring and control. Learned estimators can perform this mapping rapidly, but model-aware False Data Injection Attacks (FDIAs) may corrupt their inputs while retaining AC plausibility and residual-based stealth. Physics-Informed Neural Networks (PINNs) limit candidate states through power-flow consistency; however, their robustness depends on balancing supervised and physics losses whose scales and gradient contributions evolve during training. This paper proposes a PINN that jointly learns homoscedastic uncertainty parameters and uses them to adapt the two objectives. The formulation assigns trainable log-uncertainties to the active-power, reactive-power, voltage, and angle losses while safeguarding against an underweighted physics objective. The estimator is trained only on clean steady-state data and is evaluated, without adversarial retraining, under baseline state-distortion and stricter residual-profile-matching regimes on the IEEE~118-bus system. Accuracy is measured against the uncompromised system state. Relative to a fixed-weight PINN, dynamic weighting reduces overall Mean Absolute Error (MAE) by 55%55\% while also improving voltage- and angle-estimation accuracy. The results show that learning the physics/data balance from clean data improves robustness to unseen FDIAs.
Oct 23, 2026

State Estimation as In-context Tabular Prediction

This letter poses state estimation (SE) as an in-context tabular prediction (ICTP) problem. The key idea is a tabular arrangement in which historical measurement vectors and corresponding state estimates serve as the context, and a new measurement vector forms the query for which we predict a state vector. We propose to use tabular foundation models (TFMs), pretrained on synthetic data, whose weights are never updated, so power system data is needed only as context. With frozen TFM weights we estimate the state of 14-, 30-, 33-, 70-, and 118-bus transmission and distribution networks, and do so where weighted least squares (WLS) fails or degrades, under low observability and with bad data. ICTP errors are 11 to 57×\times below the per-bus average of the context at full metering, and 1.3 to 4.0×\times below it with only 5% of measurements available. With measurements at six buses biased by 8σσ, the ICTP angle error rises 1.8 to 5.0×\times over its bias-free value against 2.5 to 12.7×\times for WLS with bad-data detection. Without retraining, ICTP has lower voltage error than DSS2^2 on both of its feeders, and lower than a retrained TAPINE on two of three reconfiguration sets.
Sep 26, 2025

Physics-informed GNN for medium-high voltage AC power flow with edge-aware attention and line search correction operator

Physics-informed graph neural networks (PIGNNs) have emerged as fast AC power-flow solvers that can replace the classic NewtonRaphson (NR) solvers, especially when thousands of scenarios must be evaluated. However, current PIGNNs still need accuracy improvements at parity speed; in particular, the soft constraint on the physics loss is inoperative at inference, which can deter operational adoption. We address this with PIGNN-Attn-LS, combining an edge-aware attention mechanism that explicitly encodes line physics via per-edge biases to form a fully differentiable knownoperator layer inside the computation graph, with a backtracking line-search-based globalized correction operator that restores an operative decrease criterion at inference. Training and testing use a realistic High-/Medium-Voltage scenario generator, with NR used only to construct reference states. On held-out HV cases consisting of 4-32-bus grids, PIGNN-Attn-LS achieves a test RMSE of 0.00033 p.u. in voltage and 0.08 deg in angle, outperforming the PIGNN-MLP baseline by 99.5% and 87.1%, respectively. With streaming micro-batches, it delivers 2-5x faster batched inference than NR on 4-1024-bus grids.