AMSchem: Automated Schematic Visualization of AMS Circuits via Verifiable Agentic Generation
Authors: Yichen Shi, Zhiyuan Wang, Jianing Cui, Yao Lai, Jinting Zhang, Zhuofu Tao, Hongyang Wang, Zhiping Yu, Ting Jung Lin, Lei He
Organizations: Shanghai Jiao Tong University, Shanghai, China · Eastern Institute of Technology, Ningbo, China · University of Washington, USA · University of St Andrews, St Andrews, U.K. · University of Cambridge, Cambridge, U.K. · Tianjin University, Tianjin, China · University of California, Los Angeles, CA, USA · School of Computer Science and Technology, Shijiazhuang Tiedao University, Shijiazhuang, China · Tsinghua University, Beijing, China · Ningbo Institute of Digital Twin, Eastern Institute of Technology, Ningbo, China
For decades, the netlist-to-schematic gap has remained a persistent challenge in design automation, especially for analog and mixed-signal (AMS) circuits. Netlists encode connectivity, not visual presentation, making their manual conversion into readable schematics time-consuming and dependent on expert conventions. The same gap leaves LLM-based design tools without structured visual feedback, forcing them to iterate on circuits they cannot see. We present AMSchem, a training-free, verifier-guided agentic framework that automatically generates human-readable schematics from AMS netlists. AMSchem separates circuit-aware visual planning (DrawingIntent) from executable schematic geometry (SchematicIR), and applies localized visual feedback with bounded, revalidated repair patches. Deterministic validators enforce device preservation, pin-net consistency, and geometric correctness throughout. For evaluation, we construct AMSchem-Bench comprising 64 circuits of 12 types. On the 40-circuit schematic subset, AMSchem with gpt-5.5 achieves 85.0% validity (vs. 32.5% direct generation). When integrated as a visual feedback module in LLM-based analog design, AMSchem resolves all 13 previously failed cases from AnalogCoder benchmark across five models, substantially improving the success rate. Our dataset and benchmark are available at https://www.amschem.com/benchmark
Figures & tables
Fig. 1: AMSchem in LLM-driven AMS design flow: AMSchem converts netlists into readable schematics, providing visual feedback for design review and optimization by agents or humans.
Fig. 2: AMSchem overview: (1) Stage 1: the input netlist is enriched with matched building blocks and drawing references to construct DrawingIntent , with constraint-driven refinement (L1) of device preservation, relative placement, and symmetry. (2) Stage 2: DrawingIntent is translated into executable SchematicIR , with structured validation and refinement of connectivity (L2), Manhattan routing, and design-rule compliance. (3) Stage 3: the rendered schematic undergoes bounded visual refinement (L3) that diagnoses readability, overlap, and local connectivity, producing the final output artifacts.
#
Building block
1
Two-transistor NMOS current mirror
2
Two-branch NMOS cascode current mirror
3
Two-transistor PMOS current mirror
4
Two-branch PMOS cascode current mirror
5
Single NMOS common-source device
6
Single PMOS common-source device
TABLE I: Building-block library used by AMSchem.
Fig. 3: Object-level grounding in SchematicIR. Colored callouts link schematic elements to structured placement, orientation, geometry, and net bindings for deterministic validation and localized repair.
Fig. 4: L3 refinement: localized visual feedback over circuit-aware risk regions. Regions proposed by RRP (a) are cropped and diagnosed by an object-grounded visual model (b); actionable findings guide a bounded SchematicIR revision (c) that is revalidated and rerendered.
Fig. 5: AMSchem-Bench statistics.
Method
Valid (%) ↑
Scross↑
Sbend↑
Srel↑
Sorient↑
MOS ↑
E
M
H
E
M
H
E
M
H
E
M
H
E
M
H
Weave [ 19 ]
69.2
60.0
28.6
0.3333
0.3007
0.1905
0.2200
0.1248
0.0347
0.2374
0.1741
0.0611
0.3370
0.2237
0.0986
1.150
gpt-5.5
Direct-IR
84.6
10.0
0.0
0.2051
0.0800
0.0000
0.3968
0.0597
0.0000
0.5067
0.0667
0.0000
0.6316
0.0700
0.0000
–
Direct-IR + Few-shot
69.2
5.0
0.0
0.2308
0.0200
0.0000
0.3475
0.0087
0.0000
0.4106
0.0282
0.0000
0.4974
0.0273
0.0000
–
AMSchem
92.3
95.0
42.9
0.4308
0.3732
0.1111
0.3721
0.3476
0.1911
0.6557
0.6112
0.3031
0.7496
0.6557
0.3070
3.075
TABLE II: Performance across benchmark difficulty tiers. E, M, and H denote Easy, Medium, and Hard, respectively. MOS is pooled across tiers. Shaded rows indicate AMSchem.
Fig. 6: Schematic comparison on a bandgap reference circuit from AMSchem-Bench: (a) Ground truth; (b) AMSchem; (c) Weave [ 19 ] .
DI
IR
VF
Valid (%) ↑
Scross↑
Sbend↑
Srel↑
Roverlap↓
Sorient↑
×
×
×
32.5
0.1067
0.1588
0.1980
5.550
0.2403
✓
×
×
32.5
0.2083
0.1674
0.2533
1.763
0.2488
✓
✓
×
80.0
0.3344
0.3339
0.5305
0.900
0.5916
✓
✓
✓
85.0
0.3461
0.3282
0.5717
0.475
0.6252
TABLE III: Incremental analysis of AMSchem. DI, IR, and VF denote DrawingIntent, SchematicIR validation and refinement, and visual feedback, respectively.
Fig. 7: Mean per-case token consumption by pipeline stage and token type.
BBL Match
BBL Ref.
Refine
Valid (%) ↑
Scross↑
Sbend↑
Srel↑
Sorient↑
×
×
×
72.5
0.3212
0.2924
0.4787
0.5103
✓
×
×
75.0
0.3141
0.3008
0.5099
0.5350
✓
✓
×
77.5
0.3436
0.3030
0.5259
0.5721
✓
✓
✓
85.0
0.3461
0.3282
0.5717
0.6252
TABLE IV: Component ablation of DrawingIntent.
Risk region
Precision (%) ↑
Recall (%) ↑
F1 score (%) ↑
Proposal share (%)
RBBL
69.9
21.7
33.1
25.0
Rpatch
76.0
8.1
14.6
8.6
Rhighdeg
67.0
55.3
60.6
66.4
TABLE V: Comparison of RRP region types. Proposal share denotes the fraction of proposals contributed by each type.
Fig. 8: Effect of AMSchem-aided visual feedback in the AnalogCoder refinement loop across five models.
Fig. 9: Schematic-guided repair of a Gilbert-cell mixer generated by MiniMax-M3 (T19). The task and failed netlist are shown on the left. The schematic on the right identifies the incorrect output connections of the LO switching quad: red dashed segments mark removed connections, and teal segments show the drain reconnections of M4 and M6.
Fig. 10: Gilbert-cell mixer response before (a,c) and after (b,d) schematic-guided repair. (a,b) Differential output waveforms; (c,d) FFT spectra of uniformly resampled 5–20-ms segments (24 kSa/s sampling, NFFT=360 , rectangular window). Excitation: 1.0-kHz RF, 1.2-kHz LO. The plotted traces follow the original evaluator’s automatic LO bias-selection procedure. Additional comparisons at the same LO common-mode voltage show that the original circuit fails the mixing requirement and the repaired circuit satisfies it. Dashed line: 1-mV product threshold.
Appendix figures & tables2 assets
Supplementary material from the paper’s appendix.
Appendix
Fig. 11: Blinded MOS evaluation platform: (a) the landing page and (b) the candidate-scoring interface.
Fig. 12: Qualitative comparison of AMSchem, EESchematic, and Weave on two AMSNet circuits. The left column shows the comparator, and the right column shows the bandgap reference circuit. Within each column, the results are ordered from top to bottom as AMSchem, EESchematic, and Weave. All methods use the same input netlist and rendering settings for each circuit. Red circles in the EESchematic and Weave outputs mark selected topological and visual errors identified during manual inspection.
The Department of Electrical and Computer Engineering, University of Utah, Salt Lake City, UT, 48112 USA. · The Department of Electrical, Computer & Energy Engineering, University of Colorado Boulder, Boulder, CO 80309, USA.