cs.CRNov 10, 2026

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

Authors: Hyojung Han

Abstract

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

Figures & tables

Appendix figures & tables3 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Jul 6, 2026

Physics-Informed Structure Anchoring With Capture-Aware Prototype Calibration for Cross-Environment RF Fingerprinting

Radio frequency fingerprint identification (RFFI) exploits transmitter-specific hardware imperfections as physicallayer identity cues for Internet of Things (IoT) devices, but deep models often degrade across acquisition environments. In multi-antenna reception, antenna topology and frequencyoffset dynamics structure receiver observations, while capturedependent variation distorts target embeddings and misaligns source-trained decision boundaries. This article proposes physicsinformed structure anchoring with capture-aware prototype calibration (PISA-CAPC) to address both representation and decision mismatches. The two stages separate source representation construction from target decision correction. During source training, PISA organizes antenna tokens through a topology-guided graph, conditions propagation on CFO-derived acquisition dynamics, and applies bounded contextual residual suppression to preserve identity evidence. At deployment, unlabeled capture-aware prototype calibration (U-CAPC) estimates capture-local prototypes and recalibrates target decision scores while keeping the representation and source classifier fixed. Thus, calibration uses neither target labels nor target-domain backbone updates. On a measured WiFi benchmark with four receive antennas and ten transmitters, PISA-CAPC achieves a mean target-domain Macro-F1 of 0.9257 under a balanced transductive setting. Component ablations support complementary roles for topology-guided anchoring, CFO-conditioned modulation, reliability-aware token aggregation, contextual suppression, and capture-aware calibration. These results indicate that physically motivated representation learning can be combined with labelfree decision calibration to improve cross-environment RFFI under the evaluated protocol without changing the deployed backbone.
Oct 11, 2026

RF Fingerprinting of DSP Implementations using Machine Learning: An Over-the-Air Case Study

Radio frequency fingerprinting aims to identify transmitters by exploiting small differences in the emitted signal waveform. Common approaches exploit hardware-dependent imperfections for that purpose. This work instead investigates whether differences between digital signal processing implementations of a transmitter can be identified from their radiated signals. As a practical case study, five different software-based DSP implementations for generating a 2-FSK RTTY communication waveform are considered. In a monitoring receiver, a classifier can identify these DSP implementations using convolutional neural networks that are trained on augmented software-generated signals represented as raw IQ, power spectrum or instantaneous frequency. The trained networks are evaluated on over-the-air recordings obtained using a shortwave transceiver and a software-defined radio receiver. The best neural network combines IQ and the power spectrum representation and achieves an accuracy of up to 90%. The study further examines the influence of the signal SNR and the observation bandwidth on the classification accuracy. The results demonstrate that DSP implementations leave distinguishable characteristics in the transmitted signals and suggest that DSP-dependent fingerprinting can provide complementary information for specific emitter identification systems.
Jun 30, 2026

Cross-Receiver Open-Set Radio Frequency Fingerprinting via Structure-First Adaptation

Radio frequency fingerprint identification (RFFI) provides a critical physical-layer security mechanism for dynamic Internet of Things (IoT) and ad hoc networks. However, the decentralized and open nature of these networks imposes two strict deployment criteria: the credential must transfer reliably across physically dispersed, heterogeneous receivers, and it must decisively reject unregistered rogue traffic. Cross-receiver hardware shifts depress the confidence of registered devices and may also place unseen rogue transmitters in high-confidence known regions under naive domain adaptation, increasing false acceptance. To address these risks, we propose CRODA-ST, a joint optimization framework that couples Discriminative Structure Anchoring (DSA) with Rejection Oriented Alignment (ROA). Within this coupled objective, DSA establishes a stable target-known semantic foundation for shifted registered devices, while ROA regularizes the open-set decision boundaries governing rejection of unseen rogue transmitters. In the canonical WiSig setting, CRODA-ST achieves an open-set classification rate (OSCR) of 0.9580 and a target-domain false positive rate of 0.0469 at a 90% true positive rate (FPR90). A controllable LoRa simulation provides a complementary diagnostic under synthesized hardware distortions. At the distinct source-calibrated deployment operating point with rho = 0.80, CRODA-ST yields a target-unknown false acceptance rate (FAR) of 0.0075 in the evaluated setting.