cs.RONov 11, 2026

Single-View RGB-D Force--Deformation Estimation for Robotic Manipulation of Elasto-Plastic Materials

Authors: Dezhi Sun, Marijn van Hilten, Kenan Niu

Organizations: Robotics and Mechatronics, Faculty of Electrical Engineering, Mathematics and Computer Science, University of Twente, Enschede, The Netherlands.

Abstract

Persistent deformation complicates elasto-plastic manipulation by coupling physical interaction with spatially distributed shape changes. We investigate the force--deformation relationship using a standard robot, a single eye-in-hand RGB-D camera, and intrinsic force estimates. A 7-DoF Franka Emika FR3 performs normal indentations while an Intel RealSense L515 captures pre- and post-contact surfaces. Point-cloud processing localizes deformation and estimates displaced volume. Force--volume characterization includes 27 measurements over nine force levels. A compact multilayer perceptron (MLP), trained on 52 force--volume pairs at four levels, achieves a held-out RMSE of 1.857 N and R2=0.440R^2=0.440. A separate comparison shows lower error for a quadratic model at 16 N and for the MLP at 19 and 23.5 N. An eight-step experiment at 4 N per interaction demonstrates cumulative deformation localization from the second indentation onward. These results establish a practical measurement basis for deformation-aware manipulation using intrinsic force estimates and single-view geometry.

Figures & tables

Explore similar work

Sep 29, 2026

FORM: Robot Manipulation through Direct Material Law Identification

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.
Sep 20, 2026

Object-Centered Reconstruction for Vision-Based 3D Force Estimation

Excessive force may damage tissue and increase the risk of anastomotic leakage in robotic colorectal surgery. Although the da Vinci 5 provides force sensing, this capability is unavailable on earlier da Vinci systems and many other surgical robotic platforms. In this work, we present a vision-based pipeline for estimating 3D interaction forces from soft-tissue deformation in stereo endoscopic video. We dynamically reconstruct the tissue point cloud in an object-centered coordinate frame, track tissue points with geometric constraints, and predict the 3D force vector with a neural network. We progressively evaluate the pipeline on rubber-glove phantoms, ex vivo porcine colons, and in vivo colorectal surgical video sequences. Under varying tissue orientations and positions within the endoscopic view, as well as different camera viewpoints, the proposed method achieves average root mean square error (RMSEs) of 0.77 N and 1.30 N on the phantom and porcine colon, respectively. Compared with the camera-frame representation, the object-centered representation reduces average RMSE by 51.3% and 56.7%, while geometry-constrained tracking reduces RMSE by 19.8% and 25.3% compared with CoTracker. We further qualitatively demonstrate the feasibility of vision-based force estimation on an in vivo colorectal surgical sequence, as a step toward clinical translation of vision-based, sensorless force estimation.
Oct 26, 2026

3D-Force Estimation for Dual-arm Manipulation of Deformable Linear Objects via Factor Graphs

Estimating forces acting on Deformable Linear Objects (DLOs) is challenging due to their underactuated nature. However, reliable contact estimation is crucial to precisely control them and enable safe manipulation tasks. Differently from the various approaches presented in the literature, this work adopts a probabilistic formulation where the DLO state and sensor data are related through conditional distributions. In particular, factor graphs are used to determine the magnitude, direction, and location of a 3D force acting on a DLO, while simultaneously reconstructing its shape. Since DLOs are not actuated and are typically thin, like cables and wires, strain gauges and actuation readings are usually impractical. Therefore, to overcome this issue, this work is tested using one type of sensing information only, thus developing a generic technique suited for a wider variety of tasks. Realistic tests are performed by introducing noise into the measurements while the DLO follows a prescribed path in the presence of external forces that are accurately estimated.