cs.RONov 11, 2026

Robot-Induced Bias in Movement Smoothness Metrics for Rehabilitation: Quantification and Correction in Simulation

Authors: David Regev, Alex Scherbakov, Eran Beeri Bamani

Organizations: Department of Information Science and Applied Artificial Intelligence, Bar-Ilan University, Ramat Gan, Israel.

Abstract

Robot mechanics can bias kinematic measures of recovery and limit comparisons across rehabilitation devices. We developed a closed-loop human-robot simulation calibrated to published healthy and stroke group kinematics. Paired runs held motor-control parameters and movement plans fixed to quantify bias in seven metrics relative to a low-impedance reference, normalized using external repeatability benchmarks. Within a subset informed by published device specifications, median log dimensionless jerk (LDLJ) bias was 0.93 and 1.79 benchmark units for stroke and healthy profiles, respectively. Sobol analysis identified Coulomb friction and apparent mass as leading contributors; LDLJ bias persisted across 11 robustness variants. LDLJ bias increased as simulated movements became less fragmented. If recovery similarly reduces fragmentation, this effect could partly mask improvement in measured smoothness. Correction combining identified robot dynamics and observed metrics with gradient-boosted trees reduced median normalized absolute error from 0.77 to 0.10 for LDLJ and from 0.24 to 0.08 for spectral arc length (SPARC) in the device-informed subset of a random 20% hold-out. Median smoothness residuals remained at or below 0.15 benchmark units across four separately held-out parameter regions. Under an alternative controller, LDLJ error decreased from 1.60 to 0.17 without retraining, although transfer varied across metrics. These simulation results support mechanical characterization and movement-dependent correction toward more comparable robotic assessments, motivating validation in patients.

Figures & tables

Explore similar work

Oct 12, 2026

Smoothness Ranks Skill, Not Success: An Audit of Published Trajectory-Smoothness Curation Metrics Under Episode-Length Controls

Trajectory smoothness has been proposed as a cheap, training-free signal for curating imitation-learning demonstrations, most recently by rinse, which introduces Spectral Arc Length (SAL) and a contact-aware Trajectory-Envelope Distance (TED). We test whether these published metrics survive episode-length controls on real robomimic data. On can/mh, SAL separates better from worse operators with AUROC 0.952, but episode length alone achieves 0.957, and inside a duration-matched band SAL falls to 0.628 while raw mean jerk, the baseline rinse argues against, rises to 0.896. The confound replicates on square/mh. On can/mg, where every episode is exactly 150 steps, SAL is at chance (0.454) and TED is inverted (0.376) against task success, while jerk reaches 0.706. Training GMM behavior-cloning policies on each metric's curated subset (10 seeds), curating by TED costs roughly a third of downstream success relative to random selection of the same size (0.240 vs. 0.360, p=0.0001, surviving Bonferroni correction), while SAL and jerk are indistinguishable from not curating. Under a diffusion policy TED still ranks worst, though its deficit is not resolvable at five seeds, and jerk becomes significantly better than both baselines, so the curation decision does not transfer unchanged across the two policy configurations we tested. Inspecting trajectories shows why TED inverts: successful manipulation requires sustained high-deviation motion through contact, while failure is low-amplitude hovering that a smoothed envelope follows closely.
Sep 24, 2026

RoboRecover: Benchmarking Robot Policy Recovery under Execution Deviations

Robot-policy benchmarks increasingly cover diverse tasks and preset out-of-distribution conditions, but typically evaluate complete trajectories from predefined initial states. These evaluations often focus on the initialized scene and the final outcome, while paying less attention to the dynamic interaction process. During closed-loop execution, actions and contacts can alter object relations and task progress, producing off-nominal intermediate states that need recovery. Recovery requires a policy to infer how task progress has changed, correct the relevant relations, and continue the original goal. We introduce RoboRecover, a benchmark for robot policy recovery under execution deviations. RoboRecover selects deviation states from trajectories, reconstructs them by replaying action prefixes, and evaluates policies on the original task. RoboRecover contains 2,000 scenarios across RoboTwin and LIBERO, with 1,000 scenarios and a fixed 800/200 train/test split on each platform. Results show that initial-state performance does not determine recovery performance and policies exhibit different recovery strengths across scenarios. Using its training split, RoboRecover further supports study on recovery interventions. RoboRecover establishes recovery from execution-induced intermediate states as a distinct dimension of robot policy evaluation.
Jul 27, 2026

Effective Parameters, Real Behavior: Renormalization for Robotics -- From Infinite Electron Mass to Sim-to-Real Gap

Bridging the sim-to-real gap is a central problem in robotics, and the prevailing approach is to build increasingly accurate simulators. Here, we propose another approach based on renormalization: using effective, resolution-dependent parameters to absorb details omitted by the simulator and reproduce real behavior. These parameters may differ from measured physical values because they compensate for what the simulator leaves out. We demonstrate this mechanism analytically for proportional--derivative (PD) control at finite simulation frequency, where proportional feedback changes the effective derivative gain and derivative feedback changes the effective inertia. We then interpret dynamic rope manipulation and underwater swimming through the same perspective. Finally, we present a practical procedure for choosing observables, identifying omitted physics, and determining effective parameters. Renormalization offers robotics a complementary path across the sim-to-real gap: effective parameters, real behavior.