In additive manufacturing (AM), each change in part geometry requires a new thermal simulation, which makes design evaluation over many candidates costly. Geometry-aware models reduce this cost by predicting thermal fields on unseen parts with a single learned model, but they assume that diverse geometries are available centrally. This assumption is restrictive when each manufacturing site holds only a limited set of proprietary part designs that it cannot share. We propose Fed-PIGANO, a federated framework that trains physics-informed geometry-aware neural operator (PI-GANO) models at individual sites and aggregates their geometry encoders and prediction networks without sharing part geometries. We evaluate the framework on a 2D steady-state thermal benchmark for metal AM, with geometries from five polygonal families distributed across three sites under four scenarios that range from identical to strongly different family compositions. Over seven replications, Fed-PIGANO achieves mean relative L2 errors of 1.83% to 2.04% across all 12 scenario-site cases, compared with up to 20.46% for local-only training, and consistently yields lower PDE residuals. Its prediction accuracy is comparable to that of a centralized model trained on the pooled geometries of all sites. These results demonstrate that federated learning lets manufacturing sites benefit from each other's geometries without sharing them, enabling rapid thermal prediction on new part designs for tasks such as shape optimization, inverse design, and uncertainty quantification.
Figures & tables
Figure 1: Distributed-data challenge in AM. (a) Each of the C sites holds a limited set of nc part geometries. (b) Local-only training keeps data private but covers few geometries. (c) Pooling broadens coverage but may be restricted by data-sharing constraints.
Study
Physics- informed
Geometry- aware
Federated learning
AM thermal focus
PIPN ( Kashefi and Mukerji, 2022 )
✓
✓
×
×
PI-KAN-PointNet ( Kashefi and Mukerji, 2026 )
✓
✓
×
×
PI-GANO ( Zhong and Meidani, 2025 )
✓
✓
×
×
coPINN ( Gnanasambandam et al., 2026 )
✓
×
×
✓
GeoPIPN ( Saimon et al., 2026a )
✓
✓
×
✓
FedAvg-Adam ( Zhang et al., 2025a )
✓
×
✓
×
Table 1: Comparison of related studies and the research gap addressed in this work.
Parameter
Symbol
Value
Parameter
Symbol
Value
Thermal conductivity
k
9.8 W m -1 K -1
Laser power
P
375 W
Ambient temperature
Ta
300 K
Absorptivity
α
0.4
Effective layer thickness
h
2.5 mm
Absorbed power
Qtotal=αP
150 W
Beam radius
rb
2.5 mm
Source center
(xL,yL)
(−1.6rb,0)
Table 2: Material and process parameters of the thermal model.
Figure 2: Fed-PIGANO framework. Each site c∈{1,…,C} trains a local model θc that maps Xb and (x,y) to Tθ , using only its own geometries. In each round, the server aggregates all model components into θr=∑cwcθcr and broadcasts it back. The trained global model predicts thermal fields on unseen geometries.
Figure 3: Geometry generation scheme for the five families. Orange polygons show one example geometry per family.
Scenario
Split
Client 1
Client 2
Client 3
S1 ( δ=0.000 )
Train (50)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
Val (25)
( 0 5, 0 5, 0 5, 0 5, 0 5)
( 0 5, 0 5, 0 5, 0 5, 0 5)
( 0 5, 0 5, 0 5, 0 5, 0 5)
Test (50)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
S2 ( δ=0.198 )
Train (50)
(22, 16, 0 6, 0 4, 0 2)
( 0 4, 10, 18, 12, 0 6)
( 0 4, 0 4, 0 6, 14, 22)
Val (25)
(11, 0 8, 0 3, 0 2, 0 1)
( 0 2, 0 5, 0 9, 0 6, 0 3)
( 0 2, 0 2, 0 3, 0 7, 11)
Test (50)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
(10, 10, 10, 10, 10)
Table 3: Per-client family counts (Q, P, H, CP, CH) of the training, validation, and test sets in each scenario. Larger δ (Eq. ( 20 )) indicates stronger heterogeneity across clients.
Table 4: Training settings of the three models. Shared settings span all three columns.
Client 1
Client 2
Client 3
Method
ϵrel↓ (%)
ϵPDE↓ ( ×10−2 )
ϵrel↓ (%)
ϵPDE↓ ( ×10−2 )
ϵrel↓ (%)
ϵPDE↓ ( ×10−2 )
S1 ( δ=0.000 )
Local-only
4.36±0.41
6.55±0.77
4.25±0.53
6.88±0.65
4.34±0.40
6.43±0.65
Fed-PIGANO
1.91±0.17
3.34±0.25
1.83±0.15
3.40±0.35
1.89±0.22
3.45±0.28
Centralized †
1.91±0.10
2.77±0.15
1.82±0.10
2.79±0.19
1.89±0.15
2.87±0.21
S2 ( δ=0.198 )
Table 5: Relative ℓ2 error and PDE-residual RMSE on unseen test geometries for each scenario and client, as mean ± standard deviation over seven replications. Bold marks the lower mean of Local-only and Fed-PIGANO.
Figure 4: Mean test-set ϵrel (top) and ϵPDE (bottom) versus δ for each client (columns). Error bars show ±1 standard deviation over the seven replications.
Figure 5: Mean ϵrel across clients for (a) S1 to (d) S4. Error bars show ±1 standard deviation over the 50 test geometries. Lower error bars are cut at 20% of the bar height where the standard deviation exceeds 80% of the mean.
Figure 6: Mean ϵPDE across clients for (a) S1 to (d) S4. Error bars as in Fig. 5 .
Figure 7: Geometry-wise ϵrel (top row of each subfigure) and ϵPDE (bottom row) of Fed-PIGANO versus Local-only for (a) S1 to (d) S4. Markers below the identity line favor Fed-PIGANO.
Figure 8: Thermal predictions for the unseen CH geometry #45 at Client 1 in S4. The left panel shows the FEM reference. The rows show the predicted temperature, absolute error, and absolute PDE residual of each model. Error and residual color scales are shared across Figs. 8 – 10 .
Figure 9: Thermal predictions for the unseen CH geometry #49 at Client 2 in S4. Layout as in Fig. 8 .
Figure 10: Thermal predictions for the unseen P geometry #16 at Client 3 in S4. Layout as in Fig. 8 .