cs.LGNov 15, 2026

Does synthetic pre-training pay off on a microcontroller? Accuracy, latency and energy across two MCUs

Authors: Achintya Yadav

Organizations: School of Engineering, RMIT University, GPO Box 2476, Melbourne, 3001, VIC, Australia · Birla Institute of Technology and Science, Pilani, Hyderabad Campus, Jawahar Nagar, Kapra Mandal, Medchal District, Hyderabad, 500078, Telangana, India

Abstract

Rendered images are cheap to label, but a microcontroller classifier must survive 8-bit integer (INT8) quantisation and compute correctly on the chip. Five models, from MobileNetV2 at 224 px to a 61K-parameter convolutional neural network (CNN), were fine-tuned on a six-class scene dataset with and without a synthetic stage, against thresholds fixed in advance, and deployed on an ESP32-S3 and an RP2040. With full real data the stage gave no detectable gain. For the main deployable model the INT8 difference was +0.312 percentage points (pp), its interval below the +1.6 pp gain recomputed from the source study; quantisation did not detectably change it, nor did model size. With 10% of the real data the stage paid off for the CNN, by +3.438 pp on one seed and +2.715 pp over three; its cause is open. On the ESP32-S3 the main model took 152.7 ms and 16.3 mJ above idle per inference, and adding the stage changed neither beyond preset bounds. The model's INT8 outputs matched TensorFlow Lite's reference kernels exactly, but only after a memory overrun in a vendor kernel was patched. On the RP2040 the same model took 1.80 s and 27.3 mJ above idle, about twelve times slower, and the largest 96 px model exceeded the board's flash-capacity limit. Neither the RP2040 nor the host interpreter used for scoring reproduced the reference arithmetic. A synthetic stage is worth adding only when real data are scarce, and on-device INT8 outputs should be checked against reference kernels, not inferred from host scores.

Figures & tables

Explore similar work

Sep 1, 2026

FORGE: Forward-Only Test-Time Adaptation for Integer-Only Vision Models on Microcontrollers

Vision models deployed on microcontrollers (MCUs) are quantized to integer-only arithmetic and run in inference-only runtimes that do not carry the machinery backpropagation needs: the standard tool for adapting a model to the distribution shift (sensor noise, blur, lighting) it meets in the field. Existing forward-only test-time adaptation (TTA) methods either run only on server- or edge-GPU-class models (not true microcontroller integer execution), or require the batch-normalization (BN) layers that integer deployment fuses away. We present a forward-only TTA method that operates on deployed, BN-folded, integer-only convolutional networks. The key observation is that fusing BN into the preceding convolution, a mandatory step for integer inference, destroys the statistics that normalization-based adaptation relies on. We restore adaptation by re-normalizing each folded convolution's per-channel output to its clean training statistics, using only forward-pass estimates. The method (i) recovers most of gradient-based TENT's accuracy gain (+20.9 vs. +24.9 points) and matches forward-only BN adaptation, while being the only method that runs on a folded integer-only model; (ii) needs to adapt only 3 of 21 layers (selected without seeing the test corruptions) to recover 93% of the benefit; (iii) survives single-sample streaming with a batch-size-scaled momentum; and (iv) generalizes across three datasets (up to 200 classes) and two architectures. We validate bit-exact int8 convolution execution and deploy on an ESP32-S3, where, measured with a Nordic PPK2 power profiler, the forward-only adaptation (a lightweight fp32 recalibration around the int8 convolutions) costs only 8.3 mJ (6.8% of inference energy) and 21.9 ms on the deployed SIMD-optimized model: forward-only adaptation is cheap on a real microcontroller.
Oct 31, 2026

Integer-Exact Microscaling: Running MXFP4 Language Models on INT8 Matrix Units

On hardware whose fastest matrix datapath is INT8×\timesINT8, such as the Neural Accelerators of Apple's M5 GPUs, 4-bit weights must become INT8 operands. Existing MXFP4 kernels already map FP4 (E2M1) values to integers by doubling them, but apply every 32-element block scale inside the reduction. We show when no per-block work is needed: a row of MXFP4 weights is exactly one INT8 vector times one power-of-two scale if its block exponents span at most three, so a linear layer becomes a single INT8 GEMM with one rescale per output. Enforcing the condition adds at most 1/16 of a row's largest rounding error to the blocks it changes, and real weights already satisfy it: 97.9-99.97% of rows across seven models, including 99.93% of the 95M rows of a 125B-parameter mixture-of-experts (MoE) model, Qwen3.8-Flash-Next. The resulting spread-constrained MXFP4 files stay standard MXFP4. With integer instead of power-of-two block multipliers, an integer-exact format (16-wide blocks, multipliers 1..10, 4.26 bits) runs as one exact INT8 GEMM and is more accurate than NVFP4 (4.5 bits) with its standard scale rule on five small models, within 0.06 perplexity of NVFP4 with scale search. On Qwen3.8-Flash-Next's routed experts with INT8 activations it is as close to the FP8 model as NVFP4 with scale search (KL divergence 0.0557 vs. 0.0553) and closer than MLX's MXFP4 and affine INT4; with every matrix quantized it solves 94.8% of GSM8K vs. 91.0% for MLX's MXFP4. Quantizing only the 74k routed expert matrices (96% of the parameters) to either of our formats with INT8 activations costs at most 0.2% perplexity. A complete W4A8 system on the M5 produces outputs bit-identical to the quantized reference; prefill is 1.34-1.74x faster than MLX on a dense model, 1.10-1.57x on two MoE models up to 35B parameters and 1.22-1.29x on Qwen3.8-Flash-Next, where shared non-GEMM work bounds the gain.
Mar 26, 2026

Once-for-All Channel Mixers (HYPERTINYPW): Generative Compression for TinyML

Deploying neural networks on microcontrollers is constrained by kilobytes of flash and SRAM, where 1x1 pointwise (PW) mixers often dominate memory even after INT8 quantization across vision, audio, and wearable sensing. We present HYPER-TINYPW, a compression-as-generation approach that replaces most stored PW weights with generated weights: a shared micro-MLP synthesizes PW kernels once at load time from tiny per-layer codes, caches them, and executes them with standard integer operators. This preserves commodity MCU runtimes and adds only a one-off synthesis cost; steady-state latency and energy match INT8 separable CNN baselines. Enforcing a shared latent basis across layers removes cross-layer redundancy, while keeping PW1 in INT8 stabilizes early, morphology-sensitive mixing. We contribute (i) TinyML-faithful packed-byte accounting covering generator, heads/factorization, codes, kept PW1, and backbone; (ii) a unified evaluation with validation-tuned t* and bootstrap confidence intervals; and (iii) a deployability analysis covering integer-only inference and boot versus lazy synthesis. On three ECG benchmarks (Apnea-ECG, PTB-XL, MIT-BIH), HYPER-TINYPW shifts the macro-F1 versus flash Pareto frontier: at about 225 kB it matches a roughly 1.4 MB CNN while being 6.31x smaller (84.15% fewer bytes), retaining at least 95% of large-model macro-F1. Under 32-64 kB budgets it sustains balanced detection where compact baselines degrade. The mechanism applies broadly to other 1D biosignals, on-device speech, and embedded sensing tasks where per-layer redundancy dominates, indicating a wider role for compression-as-generation in resource-constrained ML systems. Beyond ECG, HYPER-TINYPW transfers to TinyML audio: on Speech Commands it reaches 96.2% test accuracy (98.2% best validation), supporting broader applicability to embedded sensing workloads where repeated linear mixers dominate memory.