cs.ARNov 18, 2026

Hypnos: A Dual-Phase End-to-End Platform for Scalable Continual Learning at the Edge

Authors: Guilherme Guedes, Marco Apolinario Lainez, Charlotte Frenkel

Organizations: Department of Microelectronics, Delft University of Technology, 2628 CD Delft, The Netherlands

Abstract

Continual learning (CL) enables neural networks to adapt to non-stationary data streams by mitigating catastrophic forgetting, offering a path to robust, private, and adaptable edge devices. Yet, porting CL to real-world edge devices remains challenging for two reasons: (i) online operation, where sensor data arrives one sample at a time and the device must adapt on-the-fly, and (ii) the low footprint of edge devices, which makes traditional error backpropagation training prohibitive. Inspired by the brain's wake and sleep cycles, the former for rapid adaptation with minimal resources and the latter for long-term consolidation, we introduce Hypnos, an open-source dual-phase platform for efficient CL at the edge. In the wake phase (e.g., daily operation), Hypnos relies on a low-footprint system-on-chip with a RISC-V microcontroller unit (MCU) targeting efficient inference and supporting lightweight gradient-free prototype updates. In the sleep phase (e.g., night-time charging), where wall-plug energy and larger memory budgets are available, a smart charger performs rehearsal-based gradient updates for consolidation. Deployed on a ZCU104 field-programmable gate array (FPGA) and synthesized in a 28-nm process, Hypnos is benchmarked on the CORe50 NICv2-391 protocol. It sets a new state-of-the-art accuracy of 78.6%-81.6% for edge CL systems, with an on-device latency of 7.79s-10.54s per sample depending on activation precision, and requires 3.8×3.8\times fewer learning steps and 22×22\times less learning compute than quantized latent replay at higher accuracy and comparable latency.

Figures & tables

Explore similar work

Jul 22, 2026

Leveraging ECRAM for Edge Continual Learning

Several edge computing platforms, such as autonomous vehicles and smart sensing devices, need to adapt to dynamic environments in real time by learning from new data in the field. Continual learning has emerged as a promising solution for edge training, by incorporating techniques that successfully combine a highly summarized version of previously trained data (to avoid catastrophic forgetting) with recently sensed data. However, as is the case with other ML algorithms, continual learning generates significant data movement between general-purpose CPUs/GPUs and memory, impacting the suitability of continual learning for edge platforms. In-memory computing (IMC; also known as processing-using-memory) can curtail this waste and make continual learning feasible at the edge, but it faces two unique challenges: (1) IMC architectures make use of noisy computation operations that significantly harm training accuracy; and (2) IMC architectures have poor and often incomplete support for resource-efficient training. To address these challenges, we propose CLASP (the Continual Learning Acceleration System Platform), which to our knowledge is the first end-to-end system with IMC acceleration for continual learning. The hardware and software of CLASP are co-designed to support a wide range of continual learning algorithms, through software-visible assembly-level instructions that can be incorporated without constraints into ML-based algorithms. CLASP is designed around a back-end-of-line (BEOL) compatible ECRAM device that we fabricate, which can overcome the challenges of IMC-based training using other emerging memory devices. We show that CLASP with ECRAM approaches the accuracy of in-GPU training, while delivering a speedup of 67x and energy savings of 132x for learning without forgetting and experience replay using MNIST.
Apr 8, 2026

Critical Patch-Aware Sparse Prompting with Decoupled Training for Continual Learning on the Edge

Continual learning (CL) on edge devices requires not only high accuracy but also training-time efficiency to support on-device adaptation under strict memory and computational constraints. While prompt-based continual learning (PCL) is parameter-efficient and achieves competitive accuracy, prior work has focused mainly on accuracy or inference-time performance, often overlooking the memory and computational costs of on-device training. In this paper, we propose CPS-Prompt, a critical patch-aware sparse prompting framework that explicitly targets training-time memory usage and computational cost by integrating critical patch sampling (CPS) for task-aware token reduction and decoupled prompt and classifier training (DPCT) to reduce backpropagation overhead. Experiments on three public benchmarks and real edge hardware show that CPS-Prompt improves peak memory, training time, and energy efficiency by about 1.6x over the balanced CODA-Prompt baseline, while maintaining accuracy within 2% of the state-of-the-art C-Prompt on average and remaining competitive with CODA-Prompt in accuracy. The code is available at https://github.com/laymond1/cps-prompt.
Nov 3, 2025

Online Continual Learning on Intel Loihi 2 via a Co-designed Spiking Neural Network

Edge AI must adapt to new classes and shifting data within a tight power budget, but online continual learning (learning from each sample before the next arrives) is where conventional processors are least efficient: each small update pays a full dispatch at full power. We present CLP-SNN, a spiking architecture that recasts the Continually Learning Prototypes (CLP) algorithm as event-driven neural dynamics: a self-normalizing local rule replaces CLP's global renormalization, prototype allocation becomes novelty-triggered neurogenesis, and correctness-modulated plasticity becomes reward-gated per-neuron metaplasticity. Deployed on Intel Loihi 2 as the first online continual learner on that chip, rehearsal-free CLP-SNN matches Replay and SLDA on OpenLORIS at 1-shot; at 25-shot, it stays within 0.8 percentage points of Replay and 6.2 points below covariance-based SLDA. Each prediction-and-update step on extracted features completes on-chip in 0.33 ms at 0.05 mJ, 7.3x lower latency and 341x lower energy than Replay on a Jetson Orin Nano.