Improving On-board Shape Models Using Sun Sensors and Implicit Representations
Authors: Zacharia A. Rudge, Giacomo Acciarini, Dario Izzo, Dominik Dold, Moritz Fieback, Said Hamdioui
Organizations: Delft University of Technology, Delft, The Netherlands · European Space Agency, Noordwijk, The Netherlands · University of Vienna, Wien, Austria
We propose an original, end-to-end approach to generate and refine the onboard 3D shape model of irregular small bodies, such as asteroids, using only low-cost Sun sensor eclipse data and coarse a priori knowledge, tailored for resource-constrained missions like CubeSats. Leveraging EclipseNets, a differentiable neural model of eclipse boundaries, our pipeline first refines 2D silhouettes by learning from real-time entry and exit events during spacecraft orbits, avoiding the limitations of traditional imaging or lidar in bandwidth-starved environments. These silhouettes then supervise a compact neural signed-distance field with periodic activations, enabling incremental updates to a high-fidelity implicit geometry representation capable of capturing fine-scale features and concavities. In simulations of the body Eros under realistic orbital dynamics, the method increases silhouette IoU from 0.70 to 0.87 and produces coherent 3D reconstructions, suggesting our approach could find a place in future autonomous architectures for small-body exploration.
Figures & tables
Figure 1: Schematic representation of the point to orthographic ray conversion, (a) shows the target body as generated by the SIREN-SDF, (b) shows a silhouette generated by the refined eclipseNet.
Model
Events Seen
Fill
IoU
XOR
Ground Truth
N/A
0.062981
1.000000
0.000000
Refined
1376256
0.062332
0.867514
0.007698
Weak
0
0.043861
0.695617
0.019119
Table 1: Metric comparison summary between the weak baseline, the refined model, and ground truth.
Figure 2: The process of training the occupancy network based on the provided EclipseNet silhouettes. Curvature regularization starts halfway through the training process. Groundtruth shapes are shown in the first column.
Figure 3: Plot of the ground truth (first column), the initial representation of the target body upon Earth departure (second column) and the refined model (third column).
Figure 4: 3D render of the final reconstructed shape, based on the trained occupancy network. Four angles (a, b, c and d) are presented.
On-orbit inspection imagery is crucial as it enables characterization of non-cooperative resident space objects, providing the geometry and structural condition essential for active debris removal and on-orbit servicing mission planning. However, most existing neural implicit surface reconstruction methods have been confined to synthetic or hardware-in-the-loop data with known camera poses and controlled illumination. In this work, we present a pipeline for neural implicit surface reconstruction of non-cooperative space objects from monocular inspection imagery. We demonstrate it on publicly released ISS inspection footage from the STS-119 mission and publicly released on-orbit inspection footage of an H-IIA rocket upper stage. We find that segmentation-based background removal is essential for successful camera pose estimation from real on-orbit footage, where background variation between frames caused direct processing to fail entirely. We further incorporate photometric correction of per-frame exposure variations and analyze its behavior across datasets, finding that performance in shadowed regions varies with the illumination characteristics of the input footage.
Bala Prenith Reddy Gopu, Patrick Quinn, George M. Nehma +4
Department of Aerospace, Physics and Space Sciences, Florida Institute of Technology, 150 W University Blvd, Melbourne, 32901, FL, USA · Creare LLC, Hanover, 03755, NH, USA
This study presents a Shape from Shading (SfS) framework to enhance sub-metre resolution lunar digital elevation models (DEMs) using imagery from the Orbiter High Resolution Camera (OHRC) aboard Chandrayaan-2. The framework applies SfS to an independent OHRC image of the same region, enabling SfS not just as a refinement tool, but as a source of new topographic data, unconstrained by stereo baseline limitations. The method is applied across three lunar sites, including the Cyrillus crater, the Vikram landing region, and the lunar south pole (Mons Mouton), with a systematic three-stage parameter sweep on the SfS smoothness weight. Results show measurable topographic enhancement, particularly in surface slope statistics, revealing fine-scale crater morphology previously unresolved. A limiting case is also characterized, where large pitch angle separation between the shading image and stereo pair reduces SfS sensitivity, and partial footprint coverage of the shading image is identified as a factor influencing spatially variable enhancement quality.
Aaranay Aadi, Jai Gopal Singla, Nitant Dube
School of Computer Science and Engineering, Manipal University Jaipur Jaipur, India · Space Applications Centre (SAC), Indian Space Research Organisation (ISRO) Ahmedabad, India
Implicit Neural Representations (INRs) have become the standard for continuous 2D shape modeling, but they suffer from black-box uneditability, vulnerability to noise, and high parameter counts that severely hinder deployment on edge devices. We introduce Fluid-SDF, a highly compressed, differentiable Constructive Solid Geometry (CSG) framework that models shapes using explicit geometric primitives blended via a smooth minimum function. By replacing traditional multi-layer perceptrons (MLPs) with a parameterized primitive engine, Fluid-SDF reconstructs complex, non-convex topologies using strictly under 100 parameters, achieving comparable or superior intersection-over-union (mIoU) to standard neural baselines. Furthermore, we demonstrate that Fluid-SDF acts as a powerful geometric prior, inherently resisting high-frequency dataset noise where capacity-matched neural networks catastrophically overfit. Finally, unlike standard INRs, Fluid-SDF's explicit parameter space allows for direct, zero-shot user editing of local and global shape features without retraining. By bypassing expensive on-device gradient updates entirely, Fluid-SDF is uniquely suited for mobile AI, augmented reality, and resource-constrained embedded environments