Attention Residual Connections

EEG decoding tasks can rely on different temporal dynamics and cross-channel relationships. We test whether specialized modules improve a fully fine-tuned EEG foundation model by augmenting CBraMod with cross-depth Attention Residuals (AttnRes) and two soft-routed expert banks. Across matched three-seed experiments on FACED, ISRUC, SEED-V, and PhysioNet-MI, the complete model changes mean balanced accuracy relative to full fine-tuning by -0.12, +1.27, +0.77, and -1.27 points, respectively. AttnRes alone improves mean balanced accuracy on three datasets, whereas adding experts on top of AttnRes helps only FACED and SEED-V. These gains come with substantial overhead: AttnRes requires 2.11 to 2.88x runtime and 1.78 to 2.67x memory, while the complete model requires 2.41 to 3.04x runtime and 1.86 to 2.85x memory. Overall, the added modules produce dataset-dependent, sometimes opposing effects rather than consistent gains over full fine-tuning.

Depth-routing residual architectures allow Transformer layers to retrieve earlier representations instead of inheriting only the immediately preceding state. Existing Block Attention Residuals, however, use a single content-dependent depth mixture to construct the inputs to queries, keys, and values. This design couples two functionally different decisions: queries and keys determine where attention matches, whereas values determine what content is retrieved. We therefore ask whether matching and content retrieval should be forced to read from the same depth. We introduce Role-Decoupled Attention Residuals (RD-AttnRes), a minimal extension that shares one depth route between queries and keys while learning an independent value route over the same residual sources. Tying the two routing queries exactly recovers the parent architecture, while decoupling them adds only one model-width vector per layer and introduces no additional token-to-token attention operation. We evaluate RD-AttnRes using a frozen, paired pretraining protocol on FineWeb-Edu with five matched seeds for both 120M- and 343M-parameter models and a 2.0B-token training budget. RD-AttnRes improves validation negative log-likelihood in all 10 matched comparisons. The mean reductions are 0.0301 and 0.0247, corresponding to perplexity reductions of 2.97 percent and 2.43 percent at 120M and 343M parameters, respectively. Early-budget controls indicate that neither the additional parameter count, duplicated routing execution, nor a fixed value route reproduces the improvement. Routing diagnostics further reveal persistent divergence between the query-key and value depth distributions. These results suggest that, within the evaluated training regime, attention matching and content retrieval benefit from distinct reads over the residual hierarchy.

We introduce SANA-Video 2.0, a hybrid video diffusion transformer instantiated at 5B and 14B scales under a unified architecture. Designed to generate high-quality video up to 720p on a single GPU, SANA-Video 2.0 matches full-softmax video DiTs in quality while retaining the favorable long-sequence scaling of linear attention. To avoid quadratic attention throughout, Hybrid Linear-Softmax Attention combines gated linear attention for O(N)-dominated mixing with periodic gated-softmax anchors at a 3:1 ratio, restoring the full-rank token interactions that pure linear attention lacks. To propagate these refreshed representations across depth, Block Attention Residuals (AttnRes) route completed block summaries into later linear layers, enabling anchor-feature reuse and boosting deep-layer effective rank by ~12%. Through from-scratch training, SANA-Video 2.0 learns the complete hybrid directly rather than linearizing pretrained models, with reduced-resolution proxy studies establishing 25% softmax as the optimal quality-efficiency trade-off. With 40-step sampling, SANA-Video 2.0 achieves a VBench score of 84.30 in 13.2s at 480p on a single H100, remaining competitive with far larger softmax video DiTs at a fraction of the latency. Its compiled DiT forward pass is 3.2x faster than a matched full-softmax baseline at 720p/60s, a gap that expands with video duration. Furthermore, full-stack Sol-Engine optimization (kernel fusion, caching, and sparse attention) accelerates this hardware-friendly backbone by a further 3.58x, bringing the 5B pipeline to 13.06s at 720p/5s and making it 120x faster than Wan 2.2-A14B on one H100. Overall, our hybrid design recovers softmax-level expressiveness at substantially reduced cost, unlocking scalable long, high resolution video generation.

Transformers propagate information across depth through a single additive residual stream: every sublayer reads only the most recent state. Attention residuals relax this by letting each sublayer attend, through a learned softmax. However, that read uses a single query shared across the entire width, so every feature subspace must read the depth history through one distribution. The cost of this forced compromise grows with how much the subspaces disagree about which layers to read, and disagreement grows with model width. We introduce Multi-Head Attention Residuals (MHAR): the routing query is reshaped into H per-subspace heads, each with its own softmax over the depth history. The read becomes block-diagonal, the reshape adds zero parameters and negligible compute, and H = 1 recovers attention residuals exactly. Trained from scratch on a deduplicated Nemotron-based anneal corpus that is quality-filtered and STEM- and code-heavy, MHAR improves validation loss over a standard Transformer at 100M, 350M, and 1B (-0.061, -0.149, and -0.140). It achieves the best result among four methods in every setting, with the gain increasing from 100M to the larger scales. The head count is a real design axis rather than a free knob: validation loss is U-shaped with respect to H, with a flat optimum at H = 4 or H = 8 across scales. We adopt H = 8 for large-scale models; over-splitting beyond this point (H = 16) consistently gives back part of the gain. A direct probe of the trained queries confirms that learned subspace disagreement is the underlying driver. Fused Triton routing kernels increase attention-residual training throughput from 0.2-0.5x to 0.55-0.88x of the baseline while maintaining near-baseline peak memory. An identity-preserving conversion using delta attention residuals supports 8B mid-training, yielding improvements of +3.2 on GSM8K and +3.1 on GPQA.

Recent work extends Transformer residual pathways along two complementary axes: historical retrieval selects information from earlier depths, whereas multi-stream methods maintain multiple residual trajectories. These capabilities have largely been studied in isolation, and assigning an independent retriever to each stream still prevents one trajectory from influencing depth selection in another. We propose Dual Attention Residuals (DAR), which brings multi-stream interaction into historical retrieval through reciprocal cross-stream addressing. For each target stream, DAR computes depth weights from normalized states in the opposite stream and applies them to values from the target stream's own history. The retrieved states are combined for an unchanged Transformer branch and updated through constrained gated writes; a block-form variant operates on block-level histories to control overhead. Across dense models from 0.1B to 1B parameters and a 7B sparse-MoE model, DAR consistently improves validation loss over standard residual Transformers and Attention Residuals. Routing ablations show that the gain cannot be explained by an additional stream or value projection alone. Representation and intervention analyses further show that reciprocal cross-stream selection preserves depth-wise diversity and avoids the redundancy or functional imbalance observed in alternative two-stream designs.

Attention Residuals (AttnRes) replace the fixed residual sum with depth-wise attention over previous sub-layer outputs in Large Language Models (LLMs), but use each output as both a full-dimensional key and value. This couples routing with representation and makes the cost of computing depth-routing scores scale with hidden width $d$. We propose Low-Rank Attention Residuals (LR-AttnRes), which keep full-dimensional residual values while using $r$-dimensional keys, with $r < d$, for routing. LR-AttnRes uses the last $r$ dimensions of each value as the routing key, reducing total residual-side FLOPs while still improving performance. Comprehensive sweeps across the number of blocks ($N$) and $r$ show that depth-wise routing can be effective with far fewer dimensions than the model width. At both $1$B and $4$B parameters with $r = d/4$, LR-AttnRes achieves lower final validation loss, higher average downstream accuracy, and higher measured training-step throughput than standard AttnRes. We also provide a fused kernel supporting standard and low-rank routing. We release all code, the kernel, and all trained models to facilitate future research.

Diffusion-based Vision-Language-Action (VLA) policies have demonstrated strong capability in modeling expressive and multimodal action distributions. However, their reliance on iterative sampling introduces substantial inference latency, which limits their applicability to reactive closed-loop robot manipulation. To address this limitation, we propose \texttt{ReactVLA}, a lightweight and low-latency VLA framework for real-time robotic manipulation. \texttt{ReactVLA} combines two complementary designs: (1) an improved Mean Flow (iMF) action generator that reduces expensive multi-step diffusion sampling to one-to-few-step action generation, and (2) Attention Residuals (AttnRes), a dynamic depth-wise feature routing mechanism that replaces uniform residual accumulation to better preserve task-relevant multimodal representations. We evaluate \texttt{ReactVLA} on large-scale simulation benchmarks, including LIBERO and RoboIMI, as well as real-world robotic manipulation tasks. Experimental results show that \texttt{ReactVLA} consistently outperforms similarly sized VLA baselines, including SmolVLA and $π_0$. On challenging precision manipulation tasks, \texttt{ReactVLA} achieves up to a 1.65$\times$ improvement in task performance while providing more than a 4$\times$ increase in inference speed compared with leading VLA models. Finally, it reduces real-world policy latency to below 38.6 ms, enabling fast reactive control on physical robot platforms. Please check out our project website at: https://game-loader.github.io/ReactVLA/.

Block Attention Residuals (Block AttnRes) by replace fixed additive residuals with a learned softmax over earlier depth-source representations, surfacing cross-layer routing as an inspectable tensor in the forward pass. This is a tempting interpretability target: information flow normally inferred indirectly is now directly observable. We ask whether such exposure suffices for mechanistic interpretation. We probe two same-scale ($0.6$B) Block AttnRes checkpoints under identical routing-ablation interventions: a vanilla Qwen3 inference-wrapped through a deterministic recency-bias schedule that the codebase admits as a routing-equivalent loading path, and a Block AttnRes Qwen3 trained from scratch with routing as part of optimisation. The wrapped baseline's routing weights are content-independent and reproduce the schedule's analytic prediction. The trained AttnRes checkpoint instead exhibits three localised routing motifs: an embedding-source pathway through early-layer MLP, a current-state pathway through early-layer attention and MLP, and an older-history pathway through late-layer attention. Beyond this stratification, we find a sharp dissociation between average routing mass and causal importance: in both sublayers, the largest mass slice is not the largest causal contribution, and one source family carries appreciable mass with no detectable causal role under intervention. Architectural exposure of routing is therefore necessary but not sufficient for mechanistic interpretation: structured depth routing emerges only when routing has been part of training, and even then, descriptive routing summaries should be treated as candidate hypotheses to be tested by causal interventions, not as evidence of mechanism in their own right.

We propose OASIS, an outlier- and sink-aware technique built on inter-layer null signaling. As AttnResidual architectures introduce an additional depth-wise normalization channel, they improve inter-layer routing flexibility but also exacerbate attention sinks, activation outliers, and the resulting degradation in inference stability and quantization robustness. OASIS addresses this issue by introducing a Softmax1-based null space and coupling token-level null evidence to depth routing through an inter-layer null signal, thereby reducing sink-dominated routing and improving structural robustness. Theoretically, we show that the dual-normalization design of AttnResidual intensifies sink formation and quantization brittleness. Experimentally, we compare OASIS against five baselines on three real-world datasets and observe consistent improvements in both attention sink and post-quantization performance. Notably, OASIS achieves an average reduction of 9.26% in maximum infinity norm and 2.60% in average kurtosis across the evaluated settings, while lowering perplexity by 75.85% under W8A8 and improving GSM8K Pass@1 by 12.42% under W4A4.

Attention Residuals replace standard additive residual connections with learned softmax attention over previous layer outputs, enabling selective cross-layer routing. However, standard Attention Residuals still attend over cumulative hidden states in previous layers, which are highly redundant. We show that this redundancy leads to routing collapse in deeper layers: attention weights become low-contrast and closer to uniform (max weight ${\approx}$0.2), limiting the model's ability to select informative states in previous layers. This raises a key but underexplored design question: what layer-wise representations should be routed in Attention Residuals? To answer this question, we propose Delta Attention Residuals, which attend over deltas -- the change introduced by each sublayer ($\mathbf{v}_i = \mathbf{h}_{i+1} - \mathbf{h}_i$) -- instead of cumulative states. Delta representations are structurally diverse and yield higher-contrast attention distributions (max weight ${\approx}$0.6), enabling more selective and effective routing across layers. This principle applies at both per-sublayer and block granularity. Across all tested scales (220M--7.6B), Delta Attention Residuals consistently outperform both standard residuals and Attention Residuals, with 1.7--8.2% validation perplexity gains. Delta Attention Residuals also enables converting pretrained checkpoints into Delta Attention Residuals via standard fine-tuning. Code is available at https://github.com/wdlctc/delta-attention-residuals-code.