Joint Source-Channel Coding

Deep joint source-channel coding (DeepJSCC) transmits data end-to-end over wireless channels using a neural encoder-decoder, but reconstruction quality can degrade sharply under adversarial perturbations and channel disturbances; no method formally bounds this degradation for DeepJSCC. We present the first bound-propagation framework for verifying DeepJSCC's decoder, bounding worst-case reconstruction error over a given wireless channel's noise region. Current deep neural network (DNN) verifiers do not support three DeepJSCC decoder components: parametric rectified linear activations (PReLU), transposed convolutions, and Rayleigh fading. We extend state-of-the-art techniques for optimization of linear relaxation in DNN verification for PReLU, replace the transposed convolution with its restricted upsample-then-convolution form, and formulate Rayleigh fading as a structural perturbation prepended directly into the decoder, thereby reducing the dimensionality of the verification problem. We also instantiate Lipschitz-regularized global robustness training, denoted GloRo, improving global robustness and enabling tight certification of DeepJSCC models for the first time. On DeepJSCC model for image transmission, this global robustness training procedure combined with structural encoding lowers the median certified bound by up to 41% and certifies about ten times more safe cases (192 against 19) than GloRo with interval encoding at a 10-degree error in channel estimation. Over-the-air validation with an orthogonal frequency-division multiplexing (OFDM) implementation on software-defined radio devices confirm the certificate holds on real hardware, with a worst observed error on radio link at 0.082 against a certified bound of 0.128.

Video semantic communication has attracted increasing attention as a promising approach to improving video transmission efficiency. However, most existing approaches rely on computationally intensive deep learning-based video encoders and decoders, which hinders their deployment in resource-constrained scenarios. To address this issue, we propose a lightweight semantic-aware joint source-channel optimization (SAJSCO) scheme that can be integrated into existing digital video communication systems as a plug-in module. Specifically, we develop a video communication system model in which the transmitter jointly optimizes source and channel coding parameters based on the inter-frame semantic importance of the input video and estimated channel state information. On this basis, we formulate an optimization problem that maximizes semantic importance weighted video reconstruction quality under a maximum bitrate constraint. To solve it, we first quantify inter-frame semantic importance using a cosine similarity-based metric with a shifted window mechanism. We then develop a multi-actor proximal policy optimization (MPPO) algorithm to solve the formulated problem by jointly adapting the source compression rate and channel coding rate. The learned policy can be directly applied to different video encoders without encoder-specific retraining or fine-tuning. SAJSCO achieves Bjøntegaard Delta rate reductions of 34.86% and 18.01% when integrated with H.265, a conventional video encoder, and DCVC-RT, a deep learning-based video encoder. Over-the-air experiments on a hardware testbed further demonstrate a PSNR gain of up to 1.448 dB with H.265 and an LPIPS reduction of up to 0.033 with DCVC-RT compared with the respective best-performing fixed-parameter baselines.

Semantic image communication seeks to preserve task-relevant scene structure under limited channel resources, but carriers are often dense latent tensors or grid-aligned semantic layouts that do not explicitly encode region-level relations. This work introduces a segmentation-derived region adjacency graph (RAG) carrier, termed channel-adaptive RAG (CA-RAG), for joint source-channel coding-style image communication. Nodes store interpretable region attributes, edges preserve adjacency, channel-adaptive graph simplification (CGS) controls the node budget, and semantic belief propagation refines noisy graph embeddings before diffusion-based reconstruction. On Cityscapes, pre-channel RAG payloads are several times smaller than compressed class-index layouts in a 2,000-image study. Under additive white Gaussian noise at signal-to-noise ratios from 0 to 15 dB, CA-RAG reports higher semantic consistency than deep joint source-channel coding and a same-decoder layout baseline, with comparable perceptual quality. At 10 dB, the full-budget rate-sweep point reaches mean intersection over union (mIoU) = 0.329 at approximately 3.3 x 10^3 channel uses, while the default adaptive-CGS setting reports mIoU = 0.294 at approximately 2.6 x 10^3 channel uses.

Deep joint source-channel coding (DeepJSCC) transmits learned semantic features efficiently but can leak sensitive attributes such as gender, race, or speaker identity. We propose LEAPSC (LEACE-in-the-loop privacy for semantic communication), whose core contribution is the integration of in-loop least-squares concept erasure (LEACE) within a variational information bottleneck (VIB) encoder. By periodically refitting the projection operator during training, LEAPSC couples the encoder dynamics to the erasure mechanism, driving attribute-conditional mean differences toward zero within each task-label group on the fitting sample. Additional components, namely conditional value-at-risk (CVaR) tail-sensitive privacy, feature-wise linear modulation (FiLM) signal-to-noise ratio conditioning, and Lagrangian dual ascent, improve robustness across channel conditions and over the high-leakage tail of samples. On CelebA, FairFace, and Google Speech Commands, LEAPSC reaches task accuracy of 0.862, 0.755, and 0.925 respectively, with attacker accuracy at or below the label-only floor on CelebA (0.548 vs. floor 0.580) and within 2 percentage points (pp) of chance elsewhere, improving over an information-bottleneck adversarial baseline (IBAL) at a matched 52-epoch budget by +3.6, +2.5, and +1.3 pp (Welch's t-test, p=0.019 on CelebA).

Deep joint source--channel coding (Deep JSCC) enables visual semantic transmission by mapping inputs directly to channel symbols and task outputs, but its performance can deteriorate under distribution shifts between training and deployment domains. We study single-source domain adaptation for task-oriented Deep JSCC and formulate a classification-capacity-invariance (CCI) function to characterize how the available channel capacity and class-conditional cross-domain invariance affect target domain classification accuracy. A scalar linear analysis of source-domain-optimal solutions and a controlled shallow nonlinear validation show that target domain classification accuracy can vary non-monotonically with the invariance constraint and with available capacity along separate control paths obtained by varying the transmitted dimension or CSNR. We then propose a domain-adaptive Deep JSCC framework that combines pseudo-label-based class-level adversarial alignment with supervised contrastive learning on confidence-filtered target samples. Experiments on digit and PACS datasets over AWGN and Rayleigh fading channels demonstrate improved target domain generalization without introducing additional inference-time networks. On SVHN $\rightarrow$ MNIST, the proposed method achieves 98.15% target-domain accuracy at a CSNR of 10 dB.

Conventional communication systems, including both separation-based coding and learning-based joint source-channel coding (JSCC), are typically designed under Shannon's rate-distortion theory. However, relying on generic distortion metrics fails to capture complex human visual perception, often resulting in blurred or unrealistic reconstructions. In this paper, we propose Joint Source-Channel-Generation Coding (JSCGC), a generative communication paradigm that replaces the conventional decoder with a generative model at the receiver. The received signal is treated as a condition that controls the sampling process into the learned conditional distribution, reformulating communication from deterministic reconstruction for distortion minimization to controlled generation for mutual information maximization under perceptual constraints. Based on this formulation, we develop a unified joint training and efficient stochastic sampling framework, and provide theoretical analysis of its effectiveness in both learning and inference stages. Extensive experiments on latent-space image transmission demonstrate that the JSCGC consistently improves feature-based, semantic-level, and distributional quality across diverse channel conditions, while exhibiting a distinct error behavior characterized by semantic inconsistency rather than distortion.

Joint image compression and wireless transmission remain relatively underexplored compared to generic image restoration, despite its importance in practical communication systems. We formulate this problem under an equivalent linear model, and propose Diffusion-OAMP, a training-free reconstruction framework that embeds a pre-trained diffusion model into the OAMP algorithm. In Diffusion-OAMP, the OAMP linear estimator produces pseudo-AWGN observations, while the diffusion model serves as a nonlinear estimator under an SNR-matching rule. This framework offers a way to incorporate multiple generative priors into OAMP. Experiments with varying compression ratios and noise levels show that Diffusion-OAMP performs favorably against classic methods in the evaluated settings.

Depthwise separable convolutional (DSConv) layers have been successfully applied to deep learning (DL)-based joint source-channel coding (JSCC) schemes to reduce computational complexity. However, a systematic investigation of the layerwise and ratio-wise replacement of standard convolutional (Conv) layers with DSConv layers in JSCC systems for wireless image transmission remains largely unexplored. In this letter, we propose a configurable lightweight JSCC framework that incorporates a selective replacement strategy, enabling flexible Conv-to-DSConv replacement at different replacement ratios and positions. By varying the replacement ratio, we obtain models with different computational complexities and analyze their impact on reconstruction performance. Furthermore, we investigate how replacements at different encoder and decoder depths influence reconstruction quality under a fixed replacement ratio. Our results show that Conv-to-DSConv replacement at the intermediate layers of the encoder and decoder achieves a favorable complexity-performance trade-off, revealing layer-wise redundancy in DL-based JSCC systems. Extensive experiments further demonstrate that the proposed framework achieves substantial parameter reduction with only slight performance degradation, enabling flexible complexity-performance trade-offs for resource-constrained edge devices.

Over-the-air computation (AirComp) broadly exploits the superposition property of wireless multiple-access channels (MACs) to compute functions of distributed data. Within this broad class, dominant conventional designs are embedding-oriented: they pre-shape transmitted signals or mitigate channel effects so that the received superposition directly realizes the prescribed computation, often requiring the MAC to approximate an ideal computational medium. This paper introduces out-of-air computation (AirCPU) and establishes an extraction-oriented paradigm for AirComp. Built on joint source-channel coding, AirCPU creates a structured wireless superposition from which the receiver extracts the target function. AirCPU operates directly on continuous-valued device data, avoiding the need for a separate source quantization stage, and employs a multi-layer nested lattice architecture that enables progressive resolution by decomposing each input into hierarchically scaled components, all transmitted over a common bounded digital constellation under a fixed power constraint. We formalize the notion of decoupled resolution, showing that in operating regimes where the decoding error probability is sufficiently small, the impact of channel noise and finite constellation constraints on distortion becomes negligible, and the resulting computation error is primarily determined by the target resolution set by the finest lattice. For fading MACs, we further introduce collective and successive computation mechanisms, in addition to the proposed direct computation, which exploit multiple decoded integer-coefficient functions and side-information functions as structural representations of the wireless superposition to significantly expand the reliable operating regime.

Reliable transmission of 3D point clouds over wireless channels is challenging due to time-varying signal-to-noise ratio (SNR) and limited bandwidth. This paper introduces sensitivity-aware filtering and transmission (SAFT), a learned transmission framework that integrates a Point-BERT-inspired encoder, a sensitivity-guided token filtering (STF) unit, a quantization block, and an SNR-aware decoder for adaptive reconstruction. Specifically, the STF module assigns token-wise importance scores based on the reconstruction sensitivity of each token under channel perturbation. We further employ a training-only symbol-usage penalty to stabilize the discrete representation, without affecting the transmitted payload. Experiments on ShapeNet, ModelNet40, and 8iVFB show that SAFT improves geometric fidelity (D1/D2 PSNR) compared with a separate source--channel coding pipeline (G-PCC combined with LDPC and QAM) and existing learned baselines, with the largest gains observed in low-SNR regimes, highlighting improved robustness under limited bandwidth.

In recent years, numerous data-intensive broadcasting applications have emerged at the wireless edge, calling for a flexible tradeoff between distortion, transmission rate, and processing complexity. While deep learning-based joint source-channel coding (DeepJSCC) has been identified as a potential solution to data-intensive communications, most of these schemes are confined to worst-case solutions, lack adaptive complexity, and are inefficient in broadcast settings. To overcome these limitations, this paper introduces nonlinear transform rateless source-channel coding (NTRSCC), a variable-length JSCC framework for broadcast channels based on rateless codes. In particular, we integrate learned source transformations with physical-layer LT codes, develop unequal protection schemes that exploit decoder side information, and devise approximations to enable end-to-end optimization of rateless parameters. Our framework enables heterogeneous receivers to adaptively adjust their received number of rateless symbols and decoding iterations in belief propagation, thereby achieving a controllable tradeoff between distortion, rate, and decoding complexity. Simulation results demonstrate that the proposed method enhances image broadcast quality under stringent communication and processing budgets over heterogeneous edge devices.

In this paper, we explore a joint source and reconfigurable intelligent surface (RIS)-assisted channel encoding (JSRE) framework for multi-user semantic communications, where a deep neural network (DNN) extracts semantic features for all users and the RIS provides channel orthogonality, enabling a unified semantic encoding-decoding design. We aim to maximize the overall energy efficiency of semantic communications across all users by jointly optimizing the user scheduling, the RIS's phase shifts, and the semantic compression ratio. Although this joint optimization problem can be addressed using conventional deep reinforcement learning (DRL) methods, evaluating semantic similarity typically relies on extensive real environment interactions, which can incur heavy computational overhead during training. To address this challenge, we propose a truncated DRL (T-DRL) framework, where a DNN-based semantic similarity estimator is developed to rapidly estimate the similarity score. Moreover, the user scheduling strategy is tightly coupled with the semantic model configuration. To exploit this relationship, we further propose a semantic model caching mechanism that stores and reuses fine-tuned semantic models corresponding to different scheduling decisions. A Transformer-based actor network is employed within the DRL framework to dynamically generate action space conditioned on the current caching state. This avoids redundant retraining and further accelerates the convergence of the learning process. Numerical results demonstrate that the proposed JSRE framework significantly improves the system energy efficiency compared with the baseline methods. By training fewer semantic models, the proposed T-DRL framework significantly enhances the learning efficiency.

Many wireless vision applications, such as autonomous driving, require preservation of global structural information rather than only per-pixel fidelity. However, existing Deep joint source-channel coding (DeepJSCC) schemes mainly optimize pixel-wise losses and provide no explicit protection of connectivity or topology. This letter proposes TopoJSCC, a topology-aware DeepJSCC framework that integrates persistent-homology regularizers to end-to-end training. Specifically, we enforce topological consistency by penalizing Wasserstein distances between cubical persistence diagrams of original and reconstructed images, and between Vietoris--Rips persistence of latent features before and after the channel to promote a robust latent manifold. TopoJSCC is based on end-to-end learning and requires no side information. Experiments show improved topology preservation and peak signal-to-noise ratio (PSNR) in low signal-to-noise ratio (SNR) and bandwidth-ratio regimes.

Visual-Language Models (VLMs), with their strong capabilities in image and text understanding, offer a solid foundation for intelligent communications. However, their effectiveness is constrained by limited token granularity, overlong visual token sequences, and inadequate cross-modal alignment. To overcome these challenges, we propose TaiChi, a novel VLM framework designed for token communications. TaiChi adopts a dual-visual tokenizer architecture that processes both high- and low-resolution images to collaboratively capture pixel-level details and global conceptual features. A Bilateral Attention Network (BAN) is introduced to intelligently fuse multi-scale visual tokens, thereby enhancing visual understanding and producing compact visual tokens. In addition, a Kolmogorov Arnold Network (KAN)-based modality projector with learnable activation functions is employed to achieve precise nonlinear alignment from visual features to the text semantic space, thus minimizing information loss. Finally, TaiChi is integrated into a multimodal and multitask token communication system equipped with a joint VLM-channel coding scheme. Experimental results validate the superior performance of TaiChi, as well as the feasibility and effectiveness of the TaiChi-driven token communication system.