Mixed-Precision Quantization

Large language models cache all previously computed key-value (KV) pairs during generation, and this KV cache grows linearly with sequence length, making it a primary memory bottleneck for serving. Quantizing the KV cache to fewer bits reduces this cost, yet all current quantizers assign the same bit-width to every attention head, ignoring the large variation in head importance. A natural idea is to allocate more bits to important heads and fewer to the rest. We show, however, that such mixed-precision allocation has a hidden pitfall: each quantizer follows a different distortion curve D(b)=alpha*beta^{-b}, and the decay rate beta varies from 3.6 to 5.3 across quantizer designs. Applying one quantizer's distortion model to another inverts the allocation order and makes performance worse than uniform quantization. We call this failure mode distortion model mismatch and propose RateQuant to resolve it. RateQuant fits a per-quantizer distortion model from a small calibration set, then solves the resulting bit-allocation problem in closed form via reverse waterfilling from rate-distortion theory. On Qwen3-8B at 2.5 average bits, calibrated RateQuant reduces KIVI's perplexity from 49.3 to 14.9 (70% reduction) and improves QuaRot by 6.6 PPL. The entire calibration takes 1.6 s on a single GPU and adds zero overhead at inference time.

Auto-regressive Large Language Models (LLMs) achieve strong performance on coding tasks, but incur high memory and inference costs. Diffusion-based language models (d-LLMs) offer bounded inference cost via iterative denoising, but their behavior under post-training quantization (PTQ) has been sparsely explored. We investigate the application and robustness of PTQ techniques, specifically GPTQ and a modified Hessian-Aware Quantization (HAWQ) algorithm, on a diffusion-based coding LLM (CoDA) and observe that these methods applied to CoDA exhibit greater robustness at low bitwidths compared to Qwen3-1.7B, its auto-regressive counterpart, under a standardized evaluation pipeline. We find that in our setup, CoDA exhibits greater robustness at low bitwidths (2-4 bits), with smaller accuracy degradation across HumanEval and MBPP benchmarks. Additionally, mixed-precision configurations derived from HAWQ provide smooth trade-offs across accuracy, latency, and memory. The results suggest that diffusion LLMs may offer advantages for efficient deployment due to more quantization-resilience.

Post-training quantization (PTQ) is essential for deploying large diffusion transformers on resource-constrained hardware, but aggressive 4-bit quantization significantly degrades generative performance. Low-rank approximation methods have emerged as a promising solution by appending auxiliary linear branches to restore performance. However, current state-of-the-art approaches assume these branches must retain high precision (W16A16) and rely on heavy, data-dependent calibration for initialization. We challenge both limitations with LoRaQ (Low-Rank Approximated Quantization), a simple, data-free calibration approach that optimizes quantization error compensation. By overcoming the need for high-precision branches, LoRaQ enables the first fully sub-16 bit pipeline, allowing the low-rank branch itself to be quantized. We demonstrate that, at equal memory overhead, LoRaQ outperforms the state-of-the-art methods in their native implementations on Pixart-$Σ$ and SANA. We also analyze mixed-precision configurations, showing that setups such as W8A8, W6A6, and W4A8 for the low-rank branch, alongside a W4 main layer, yield superior results while maintaining a fully quantized architecture compatible with modern mixed-precision hardware.

Neural network accelerators have been widely applied to edge devices for complex tasks like object tracking, image recognition, etc. Previous works have explored the quantization technologies in related lightweight accelerator designs to reduce hardware resource consumption. However, low precision leads to high accuracy loss in inference. Therefore, mixed-precision quantization becomes an alternative solution by applying different precision in different layers to trade off resource consumption and accuracy. Because regular designs for multiplication on hardware cannot support the precision reconfiguration for a multi-precision Quantized Neural Network (QNN) model in runtime, we propose a runtime reconfigurable multi-precision multi-channel bitwise systolic array design for QNN accelerators. We have implemented and evaluated our work on the Ultra96 FPGA platform. Results show that our work can achieve 1.3185 to 3.5671 times speedup in inferring mixed-precision models and has less critical path delay, supporting a higher clock frequency (250MHz).

Mixed-Precision Quantization (MPQ) liberates Deep Neural Networks (DNNs) from the Out-Of-Memory (OOM) bottleneck and has garnered increasing research attention. However, conventional methods either rely on costly differentiable optimization search, which is neither efficient nor flexible, or learn a quantized DNN from a proxy (e.g., HAWQ) manually designed by human experts, which is labor-intensive and requires extensive expert knowledge. Can we design a proxy without involving any human experts or training? In this paper, we provide an affirmative answer by proposing a novel Large Language Model (LLM)-driven Training-free Automatic Proxy (dubbed TAP) discovery framework. It reforms the design paradigm of MPQ by utilizing LLMs and evolutionary search strategies to automatically find superior TAP tailored for MPQ. In addition, to bridge the gap between black-box LLMs and the challenging MPQ task, we introduce a lightweight Direct Preference Optimization (DPO)-based strategy controller that dynamically reweights the selection probabilities of the three prompt templates for evolutionary search strategies according to fitness signals, without fine-tuning the LLM. This forms a task-aware feedback loop that improves proxy generation across evolutions. Extensive experiments on mainstream benchmarks demonstrate that TAP achieves state-of-the-art performance. Finally, we believe that our TAP will significantly contribute to the MPQ community by providing a new perspective on LLM-driven design algorithms.

Many LLM applications require only narrow capabilities, yet standard post-training quantization (PTQ) methods allocate precision without considering the target task. This can waste bits on layers that are less relevant to the task signal while over-compressing layers that are critical for downstream behavior. We propose Task-Aware Quantization (TAQ), a training-free, weight-only mixed-precision PTQ framework that uses a small set of unlabeled task calibration prompts to allocate higher precision to task-relevant transformer layers under a fixed bit budget. TAQ estimates layer importance from hidden representations and output sensitivity, and we instantiate it with three scoring rules: TAQ-IS, based on activation information and stability; TAQ-KL, based on output-distribution sensitivity under a quantization-noise proxy; and TAQ-O, a label-informed oracle diagnostic for analyzing layer sensitivity. Across several benchmarks, TAQ outperforms task-agnostic baselines such in most settings, with especially strong gains in the accuracy--memory ratio. We further validate that these gains translate to real deployment behavior through hardware throughput and latency measurements, and analyze calibration robustness and residual-stream error propagation. Overall, TAQ turns mixed-precision PTQ from a model-centric compression step into a task-conditioned precision-allocation problem. A reference implementation is available at \href{https://anonymous.4open.science/r/TAQ-9217/README.md}{\includegraphics[height=1em]{imgs/github-mark.png}}.

Large Language Models (LLMs) with multimodal capabilities have revolutionized vision-language tasks, but their deployment often requires huge memory and computational resources. Post-training quantization (PTQ) has successfully compressed language models to as low as 1-bit precision, its effectiveness for multimodal LLMs (MLLMs) remains unexplored. In this paper, we present the first method for ultra-low-bit (<4-bit) quantization of MLLMs. Our analysis reveals that multimodal tokens and intermediate layer activations produced by them exhibit significantly higher entropy compared to text tokens, indicating greater functional complexity that makes MLLMs less tolerant to ultra-low bit quantization. However, this entropy varies significantly across layers, with some layers producing lower-entropy activation distributions that we empirically show can better tolerate ultra-low bit quantization. Existing PTQ methods optimize weight quantization within each layer but apply the same target precision uniformly, ignoring this variation in complexity across layers. Building on this insight, we propose LUQ: Layerwise Ultra-Low Bit Quantization, which characterizes each transformer layer's functional complexity via its output activation entropy and selectively applies ultra-low bit quantization to layers encoding simpler, more compressible functions. We also show that multimodal calibration (image and text tokens) boosts VQA performance in the ultra-low bit regime. Evaluated on LLaVA-1.5 and Qwen-2.5-VL across 9 VQA benchmarks, LUQ models use 40% and 31% less memory than their 4-bit counterparts while exhibiting less than 10% degradation on MME.

As increasingly large pre-trained models are released, deploying them on edge devices for privacy-preserving applications requires effective compression. Recent works combine quantization with the fine-tuning of high-precision LoRA adapters, which can substantially reduce model size while mitigating the accuracy loss from quantization. However, edge devices have inherently heterogeneous capabilities, while performing configuration-wise fine-tuning for every quantization setting is computationally prohibitive. In this paper, we propose CoA-LoRA, a method that dynamically adjusts the LoRA adapter to arbitrary quantization configurations (i.e., the per-layer bit-width choices of a pre-trained model) without requiring repeated fine-tuning. This is accomplished via a configuration-aware model that maps each configuration to its low-rank adjustments. The effectiveness of this model critically depends on the training configuration set, a collection of configurations chosen to cover different total bit-width budgets. However, constructing a high-quality configuration set is non-trivial. We therefore design a Pareto-based configuration search that iteratively optimizes the training configuration set, yielding more precise low-rank adjustments. Our experiments demonstrate that, unlike the state-of-the-art methods that require fine-tuning a separate LoRA adapter for each configuration, CoA-LoRA incurs no additional time cost while achieving comparable or even superior performance to those methods.

Deploying large language models (LLMs) is challenging due to their massive parameters and high computational costs. Ultra low-bit quantization can significantly reduce storage and accelerate inference, but extreme compression (i.e., mean bit-width <= 2) often leads to severe performance degradation. To address this, we propose Squeeze10-LLM, effectively "squeezing" 16-bit LLMs' weights by 10 times. Specifically, Squeeze10-LLM is a staged mixed-precision post-training quantization (PTQ) framework and achieves an average of 1.6 bits per weight by quantizing 80% of the weights to 1 bit and 20% to 4 bits. We introduce Squeeze10LLM with two key innovations: Post-Binarization Activation Robustness (PBAR) and Full Information Activation Supervision (FIAS). PBAR is a refined weight significance metric that accounts for the impact of quantization on activations, improving accuracy in low-bit settings. FIAS is a strategy that preserves full activation information during quantization to mitigate cumulative error propagation across layers. Experiments on LLaMA and LLaMA2 show that Squeeze10-LLM achieves state-of-the-art performance for sub-2bit weight-only quantization, improving average accuracy from 43% to 56% on six zero-shot classification tasks--a significant boost over existing PTQ methods.

Mixture-of-Experts (MoE) has become a practical architecture for scaling LLM capacity while keeping per-token compute modest, but deploying MoE models on a single, memory-limited GPU remains difficult because expert weights dominate the HBM footprint. Existing expert offloading and prefetching systems reduce the resident set, yet they often pay expert-loading costs on the critical path when activation becomes dense. Post-training quantization (PTQ) lowers the footprint without transfers, but prevailing pipelines fix expert bit-widths offline and assume routing remains stable, even though MoE expert utilization is heavy-tailed and the hot set can shift across workloads. We present DynaExq, a runtime-aware mixed-precision serving system that treats single-GPU MoE inference under a hard HBM envelope as an online, budget-constrained precision allocation problem. The key insight is to keep the experts that dominate runtime traffic resident at higher precision, while maintaining a low-precision fallback for the remaining experts, so the system can reduce transfer volume and avoid the waiting latency that limits offloading and prefetching under dense activation. DynaExq estimates long-horizon expert hotness from router traces, selects a per-layer high-precision resident set via a budget-feasible top-$n$ rule, and applies promotions and demotions asynchronously through stable expert handles so the forward pass always executes on a fully materialized expert version. Across Qwen3-MoE-30B/80B and six benchmarks, DynaExq improves accuracy over static PTQ on Qwen3-80B (73.09% to 77.57%) under comparable device-memory budgets and achieves up to 2.73x higher throughput than offloading/prefetch baselines at batch size 32.