Neural Network Quantization

Quantizing AdamW's optimizer states reduces persistent storage, but quantization errors propagate through the moment recurrences and perturb subsequent adaptive updates. We redesign 4-bit optimizer-state quantization for AdamW from the perspective of \emph{rounding space}: the coordinate in which a quantizer chooses between adjacent reconstruction levels. For the second moment, a local analysis of the quantization cell adjacent to zero shows that small mean state error need not imply small mean preconditioner error at the next step. A one-dimensional quadratic construction further shows qualitatively different optimization dynamics under state-space and preconditioner-space rounding. These results motivate Zero-Inclusive Preconditioner-space Stochastic Rounding (\textbf{ZIP-SR}), which retains zero in the second-moment codebook and computes stochastic-rounding probabilities in preconditioner space. As a complementary route, Zero-Excluding EDEN calibration (\textbf{ZE-EDEN}) uses a zero-excluding second-moment codebook and rescales the quantized second-moment block to mitigate the preconditioner distortion caused by the positive quantization floor. Both configurations use 4-bit NormalFloat (NF4) for the first moment, with targeted stochastic rounding of the LM-head first moment during the final 10% of training. Across GPT- and Llama-style pretraining experiments ranging from \textbf{130M} to \textbf{2.7B} parameters, both methods reduce TorchAO 4-bit AdamW's mean validation-loss gap to 32-bit AdamW at every evaluated model size, with the largest reported gap reduction reaching \textbf{70%}. In full-parameter supervised fine-tuning, both recipes achieve lower validation loss than TorchAO while remaining close to 32-bit AdamW on downstream tasks.

KV-cache entries are stored before their future queries are known, but each decoding query needs precision in different places. We study this mismatch using separate budgets for retained bits and bits fetched per query. ReadKV stores each key and value in a progressive code whose prefixes support different reconstruction precisions. For each query, it allocates key-channel prefixes using the query, computes attention from the reconstructed keys, and then allocates value-token prefixes using that attention. Stored entries remain unchanged. Each stage optimizes a calibrated distortion objective under a fixed budget; we prove exact allocation under diminishing refinement gains and relate these objectives to attention-output error. We also exhibit a finite-dimensional attention family where query-dependent access strictly outperforms every query-independent reader at the same read budget, even with unrestricted competing encoders and decoders. Across six base models, reading four bits on average from an eight-bit cache increases C4 perplexity by at most 0.66%, using about one quarter of the logical reads and half the retained capacity of a 16-bit cache. It is consistently more accurate than storing and fully reading four bits at the same payload-read budget. Retaining more bits than each query fetches is aimed at long-context decoding, where the cache bytes moved per step, rather than the weights, dominate cost. Long-context question answering and retrieval on two instruction-tuned models provide additional quality evidence. On the tested 8K-token, batch-one, single-layer workload on an NVIDIA A10G, a restricted eight-bit ReadKV reader with a two-bit mean payload-read budget has 39% lower latency than the tested TurboQuant codec.

Post-training quantization (PTQ) enables efficient deployment, yet transformer architectures remain challenging to quantize due to nonlinear layers. While existing methods attribute accuracy loss to insufficient numerical precision, often necessitating floating-point fallbacks, we demonstrate that degradation is actually driven by specific structural error sources. We find that learned scale parameters in normalization layers and compounded approximations in GELU are the primary error contributors, whereas SoftMax remains inherently robust to aggressive quantization. To address these bottlenecks, we introduce TR-PTQ, a unified integer-only formulation using shared Taylor Region (TR) exponential and logarithm primitives. This approach allows computationally expensive operations, including division and square roots, to be performed entirely in the log-domain via standard integer arithmetic. Combined with a calibration-free, outlier-aware optimization for LayerNorm parameters, our method eliminates the need for floating-point hardware units for nonlinearities, achieving less than 1.5% absolute accuracy degradation across vision and language benchmarks.

Mixed-precision post-training quantization is a network compression method that assigns bits layer by layer, under a global memory budget using a small calibration set. The main difficulties are to overcome the combinatorial nature of the allocation problem and to manage the sensitivity to small, potentially corrupted databases. Hence, an efficient allocation method should be fast to compute and preserve model quality when calibration data are corrupted. To design such a method, we derive a layerwise probabilistic analysis of the quantization error that separates propagated error from the local perturbation introduced at a given layer. We use this local term to build a separable score for a simple allocation algorithm, that requires no external solver. The probabilistic nature of our approach brings robustness to corrupted data. On denoising tasks with DRUNet, with an average budget of 4 bits per weight, our method matches or improves state-of-the-art mixed-precision baselines under clean calibration, and is more robust to corrupted calibration, with PSNR gains of up to 7.5 dB under the tested corruptions. Experiments show bit-allocation speed-ups from 28x to 2,570x over the studied baselines. For quantized diffusion models, our experiments show that a direct application of our framework also improves the state-of-the-art.

Mixed-precision post-training quantization needs a per-module sensitivity signal; for a text embedder the obvious one -- the retrieval quality a module costs when quantized -- needs relevance labels that deployments rarely have. We measure a label-free substitute: quantization-induced representation drift, obtained by quantizing one module, re-encoding the corpus, and recording how far the output embeddings moved from their full-precision positions. What is specific is the observable: the deployed output representation a dense retriever ranks with. Across five development embedders, configuration-level drift orders sampled mixed-precision plans against held-out retrieval quality at a macro Spearman of 0.911, the sensitivity transports across calibration corpora and retrieval domains in the usable regime, module drifts compose rank-consistently but not numerically, and relevance-derived sensitivity adds no consistent value. The method is one additive allocation under a hard packed-byte budget, with no labels and no search. On three embedders held untouched until method, baselines and hypotheses were frozen and sealed, the pre-registered directional hypothesis against the prior LieQ criterion holds (3/3 at the main budget, no collapse) and drift scores above a two-sided LieQ steelman in 2/3; but at the main budget drift is numerically lower than same-budget uniform precision on all three (-0.99, -0.85, -1.01 points), having reduced module and whole-model drift as designed. Output drift is thus a robust coarse sensitivity signal, not a universally optimal allocation objective: it avoids the catastrophic failures of the transferred signed-geometry adaptation and can remain usable at stressed budgets where uniform collapses, but fine-grained redistribution around a strong uniform operating point remains unresolved.

The best two-bit weight quantizers for large language models, such as QTIP and Proteus, rotate each weight matrix by a random orthogonal transform, which must be undone at every decoding step, then encode it with a trellis or lattice code under a Euclidean search; the layer Hessian enters only through error feedback between coding blocks. We show that this leaves part of the Hessian unused. Error feedback turns the loss into a weighted sum of per-coordinate rounding errors whose weights, the diagonal of the Hessian's LDL factorization, existing quantizers compute but never read. We put these weights into the Viterbi branch metric, so the search follows the curvature within each coding block. This also explains the rotation: it removes this within-block variation, so weighting in the native basis and rotating are substitutes. On three models the weighted native search matches a full-dimension randomized Hadamard to within about one point of downstream accuracy, and weighting after the rotation gains little. Around this search we build CurveTQ, a trellis codec with no rotation, which handles the weights' amplitude and marginal shape with a factored scale field and a closed-form quantile table, and stores a start state per coding block so the trellis can adapt to the residual that error feedback carries into it. At two bits CurveTQ is 1-3 points higher in mean downstream accuracy than QTIP and Proteus on three 4-8B Instruct models, even after both are given our start state, which alone lifts either baseline by 1-3 points. It also leads on a 35B mixture of experts, to our knowledge the first trellis-coded result on such a model. With no rotation to undo, our decoder is the fastest of the three at all tested batch sizes and bit widths.

Extreme low-bit LLM compression is most challenging when weights, activations, and KV caches are quantized together: their distributions differ, and quantization errors interact throughout the network. We introduce CanonQ, a unified quantization-aware training framework that addresses these challenges by separating source canonicalization from task-aware adaptation. Fixed rotations and energy normalization map heterogeneous tensor sources to canonical coordinates, enabling frozen Gaussian-reference codebooks to be reused across layers and models. Joint training then adapts the network to the coupled errors of weight, activation, and cache quantization within a common scalar/vector interface. We bound frozen-codebook transfer error and local task loss, and derive an exact normalization-aware straight-through Jacobian that links quantization distortion to gradient bias. The strongest gains arise under joint W2A4KV2 compression: across LLaMA3-1B/3B/8B, CanonQ-Omni achieves up to 14.28x lower WikiText-2 perplexity and up to 57.9% higher mean zero-shot accuracy than prior state-of-the-art and representative quantization baselines. The benefits extend to Qwen3-1.7B, code generation, and mathematical reasoning: on instruction-tuned MobileLLM-Pro-1B at W2A16KV16, CanonQ achieves relative improvements of 41.7% in HumanEval pass@1 and 39.1% in GSM8K exact match over the strongest evaluated quantization baseline.

We introduce ApexQuant, a calibration-free quantization method that recursively re-quantizes the residual error, serving as a refinement layer on top of existing quantizers. We establish that a fresh random rotation returns each residual to the uniform distribution on the hypersphere, which characterizes the rate of progressive error decay across successive passes. This result lets us determine, before any weight is read, how many passes a layer needs for a target weight-space error. Every prefix is itself a valid lower-rate model, so one artifact serves several precisions. We instantiate ApexQuant with three interchangeable stages, scalar, $E_8$ and trellis, and validate it on four open-weight LLMs and on Earth-observation and medical domains where in-distribution data is often unattainable as imagery arrives under restrictive licences or due to patient material under privacy constraints. Progressive re-isotropization comes within a few percent of full precision at four bits and gives the best two-bit arm we measure, in a completely data-free setting.

Post-training quantization is a powerful tool for compressing large language models. The most scalable methods quantize every layer in parallel, but quantization errors then compound through the residual stream, as no layer corrects for the errors of the layers before it. Sequential quantization accounts for this error compounding by re-calibrating each layer on the already-quantized outputs of its predecessors, yielding stronger results but at the cost of a serial schedule that becomes a bottleneck at scale. As a solution, we propose parallel quantization with activation denoising, which recovers much of the sequential benefit while keeping quantization fully parallel. Rather than re-calibrating layer-by-layer, we take a robustness perspective and model the upstream error as noise, regularizing to be robust to it through a preprocessing step followed by metric-weighted rounding. Applied at every layer, this regularization forms a depth-compounding smoothness penalty that dampens how strongly quantization errors amplify through the model. Unlike orthogonal rotations commonly used in quantization, which must preserve the model's function, we multiply the weights by a more general linear transformation. We find that the two are complementary and their effects compound. Empirically, our robustness regularization recovers a significant part of sequential quantization's benefit in a single parallel pass, at a fraction of its time. Overall, by treating compounding quantization errors as a robustness problem, we offer a principled foundation for more efficient and accurate LLM quantization at scale.

Fine-grained mixed-precision quantization promises efficient large language model inference, but local precision choices can conflict with regular GPU storage and computation units. This precision-boundary mismatch limits the translation of compression into practical acceleration. We introduce AlignQuant, a post-training quantization method that uses GPU-compatible two-dimensional weight tiles as the common unit of precision allocation, compact storage, and execution. This shared partition lets precision follow sensitivity within output channels. Joint prefill/decode calibration scores precision reductions using projection-output perturbations weighted by language-model loss gradients under quantized activations. Phase-normalized scores prioritize higher precision for tiles important to either phase under a model-wide weight-storage budget. Each tile stores one selected representation, while phase-specialized kernels reuse the packed model and expand lower-bit weights for INT8 computation with 8-bit activations. Across four LLMs spanning 3B to 14B parameters, AlignQuant achieves up to $2.50\times$ generation speedup over BF16 while preserving model quality. Evaluations further cover three GPUs and contexts up to 64K tokens. These results show that local precision flexibility and regular GPU execution can coexist through a shared tile unit. The implementation is available at https://github.com/HanzhiZhang-Ulrica/AlignQuant.

Diffusion large language models dLLMs) have emerged as a promising alternative to autoregressive language models through bidirectional diffusion-based token generation. However, their growing model sizes and high inference costs make efficient deployment challenging: full-sequence denoising repeatedly invokes compute-intensive forward passes, while block-diffusion models additionally introduce a memory-intensive KV-cache. Low-bit weight-activation quantization is therefore attractive, yet existing dLLM post-training quantization methods rely on calibration data despite activation distributions shifting across masking states and denoising steps. We present SoloQ, a calibration-free quantization framework that maps weights and activations into a normalized rotated basis with a predictable marginal distribution, enabling data-independent quantization. SoloQ combines a structured K-RPBH rotation with a lightweight rescaling correction for calibration-free quantization. Its predictable post-rotation distribution supports both distribution-matched codebooks and hardware-native NVFP4. For block-diffusion models, SoloQ further applies commit-time KV-cache quantization to compress persistent states without perturbing the actively denoised block. Across full-sequence dLLMs (LLaDA and Dream) and block-diffusion dLLMs(Fast-dLLM v2 and Nemotron-Labs-Diffusion), SoloQ retains accuracy under 4-bit quantization and outperforms calibration-based baselines on knowledge- and reasoning-intensive benchmarks. With NVFP4, SoloQ reduces peak memory by up to 2.61X and accelerates end-to-end inference by up to 2.24X.

Diffusion transformers (DiTs) achieve state-of-the-art image generation, but their sampling cost limits deployment. Quantizing both weights and activations to 4 bits reduces this cost, yet existing methods fall short in one of two ways. Calibration-based methods are tied to a specific checkpoint and prompt distribution, whereas data-free Hadamard rotation, effective for LLMs, loses quality on DiTs. We show that this loss has a structural cause. Adaptive layer-norm conditioning adds a per-token mean to the activations, and at the widths of the evaluated DiTs, the Hadamard rotations used by data-free methods cannot spread this mean uniformly across coordinates. A single dominant direction therefore survives the rotation and sets the quantization range. We introduce CentriQ, a calibration-free quantizer that centers each token before rotation and restores the mean exactly through a rank-1 full-precision branch, so that per-token scales follow in closed form without data. Weights are fitted under a robust $\ell_p$ objective that tracks the dense mode of each group and discounts heavy tails. Across three DiTs, CentriQ matches the quality of calibrated SVDQuant at 4 bits, whereas calibration-free weight quantizers with plain per-token activation quantization collapse or degrade substantially. CentriQ outperforms the strongest calibration-free method reported to date at 2-bit weights. It is also the first calibration-free method to retain usable image quality at 2-bit activations.

Language-model systems batch questions for throughput, but unrelated questions should not change a target's answer when its input and numerical execution are fixed. We study compression of the key and value cache, which stores attention representations reused during generation. With request-local groups, Transformers' Half-Quadratic Quantization (HQQ) backend updates compression parameters separately but uses a shared average error to decide when all updates stop. Replacing only the question batched with the target changes four-bit HQQ answers in 170/384 test comparisons across two models. Replaying the other execution's update counts reproduces its complete answer and cache fingerprints in every changed pair, in both directions. Computing the stopping mean in FP32 reduces cache differences but leaves answer changes. Native HQQ also changes confirmed numerical correctness in eight arithmetic pairs. Fixed iterations and request-local stopping remove observed companion dependence under matched controls. Request-local stopping remains sensitive to synthetic padding changes at the tensor level. Fixing the original iteration budget removes this decision path without tuning. Neither repair has an established quality advantage, and natural rebatching still changes answers. Request-independence audits must cover stopping decisions as well as quantization groups.

SVD-based pruning and quantization have recently emerged as a promising strategy for the ultra-efficient compression of large language models. In these methods, compression is performed in two stages: components are first truncated, and the remaining ones are subsequently quantized. Although this decoupled pipeline benefits from both pruning and quantization, it requires separate optimization for each stage and fails to fully exploit their balance, which can lead to suboptimal performance under aggressive compression. To address this limitation, we propose a new LLM compression method that co-optimizes pruning and quantization in a unified framework. Our key idea is a differentiable method for learning component-wise bit-widths, allowing less important components to be assigned 0-bit precision and pruned away. Notably, our method performs favorably against two-stage baselines, even when subjected to extreme quantization settings ($1.61$ bits) designed for ultra-efficiency. Code: https://github.com/MMAI-Laboratory/DBW.

Large language models (LLMs) are typically pretrained in high precision but increasingly deployed with low-precision post-training quantization (PTQ). Recent studies have shown that using weight averaging during pretraining can improve PTQ performance compared with learning-rate decay, suggesting that it might provide a simple way to improve the pretraining-to-quantization transition. But the mechanism behind weight averaging remains insufficiently explained. This leads to inconsistent and fragile performance gains, thereby preventing practitioners from applying such a technique confidently. As a response, we formulate weight averaging as a trade-off between retaining training progress and improving robustness under perturbation. We further derive a continuous family of averaging kernels that unifies conventional strategies and achieves the Pareto frontier between the two competing goals. Critically, a theoretical framework for performing weight averaging under PTQ is developed. It can be shown that coarser quantization is more susceptible to perturbations, whereas finer quantization could be less affected. Thus, our results could provide unified theoretical guidance for performing weight averaging under different PTQ conditions. Experiments validate both the predicted behavior and the proposed averaging strategy. Code is available at https://github.com/MOFA-LAB/weight-averaging-for-ptq.

Post-training quantization (PTQ) methods typically use sequential quantization that partitions a pre-trained LLM into a series of units (e.g., transformer blocks), with one unit quantized at each stage. State-of-the-art PTQ methods are predominantly learning-based, optimizing auxiliary quantization parameters (e.g., scaling factors, rotation matrices, clipping thresholds, and adapters) via gradient descent to minimize a reconstruction loss. A common practice is to use mean squared error (MSE) as the reconstruction loss function, yet its induced optimization behavior remains largely unexplored. In this work, we take a holistic view of sequential quantization and systematically investigate how optimization evolves from the first quantization stage to the last, aiming for a deep understanding of optimization in learning-based PTQ schemes. Through extensive empirical studies spanning representative learning-based PTQ methods, LLM families, model scales, architectures, quantization settings and various tasks, we consistently uncover Optimization Imbalance: reconstruction loss magnitudes vary dramatically across stages, accompanied by highly uneven gradient magnitudes and parameter updates under MSE. We term the cross-stage range of loss magnitudes the reconstruction loss scale, and reveal that MSE translates the unexpectedly large reconstruction loss scale into highly uneven gradient magnitudes, which in turn lead to uneven optimization strength across quantization stages. This finding suggests a general principle for improving learning-based PTQ: optimization strength across stages should be decoupled from the reconstruction loss scale. Theoretically, we show that root mean squared error (RMSE) variants defined at the sample, channel, token, and element levels naturally realize this principle through implicit gradient normalization, outperforming MSE significantly as a drop-in replacement.

Trellis-coded quantization enables high-dimensional compression of large language model (LLM) weights at ultra-low bit widths without the exponentially large codebooks required by conventional vector quantization. Practical deployment, however, presents two challenges: reconstructing compressed weights at sufficient parallel throughput to avoid making dequantization an inference bottleneck, and maintaining quantization accuracy without costly incoherence transformations. We address these challenges with two complementary techniques. First, we introduce an ultra-low-complexity trellis dequantizer that uses a structured, hardware-efficient state-to-value mapping while preserving diverse reconstruction choices for trellis search. Second, we reformulate discrete trellis path optimization with a curvature-aware objective that reflects model sensitivity directly in the original coordinate space. Together, these techniques enable high-quality ultra-low-bit trellis quantization with inexpensive, highly parallel runtime reconstruction and without relying on Hadamard-based incoherence processing.

Looped models reason by applying the same block of weights many times, so compressing that block saves memory traffic on every loop. Compressed looped models, however, often collapse, and the collapse is usually blamed on rounding error that accumulates from loop to loop. In this work we test that account on more than 30 models from five families and find, to our surprise, that it holds only for loops that never settle. When a loop settles, a fixed rounding error does not accumulate. It moves the point where the loop settles, much as tilting a bowl moves where a ball comes to rest, and the answer is lost only when the shift is larger than the readout tolerates. This picture lets us predict which models fail from a single label-free measurement, and it tells us why failed models recover: their loops still settle, so a few final loops with 8-bit weights bring the answer back. Motivated by these findings, we build a controller that stops when the model's halting head fires and then finishes with 8-bit loops. On Sudoku-Extreme and Maze-Hard it beats fixed-depth inference by up to 15 points under a third of the weight traffic.

Mamba-style and hybrid language models compress their past into a fixed-size recurrent state that is rewritten at every generated token. Storing this state in low precision saves memory bandwidth, but every rounding error is fed back into the next update and can accumulate over long generations. Production systems round the state stochastically; we ask which rounding rule such caches should use. We find that a deterministic golden-ratio Weyl dither, which needs no random numbers, consistently brings the quantized model closer to the full-precision one than stochastic rounding, across pure and hybrid models, storage formats, and long decoding horizons, at no extra cost. Round-to-nearest behaves differently: because it discards small updates, its error keeps growing, so it can look best in short evaluations yet falls far behind over long generations. A discrepancy analysis explains this ordering, and we document implementation pitfalls that silently remove the benefit.

World-action models (WAMs) jointly generate future world states and actions through iterative denoising, using shared weights to process heterogeneous semantic streams of video, proprioceptive, and action tokens. Quantization reduces inference cost, but comparable numerical errors in different streams can have markedly different effects on final actions, making numerical accuracy alone insufficient for reliable control. We introduce SteerQuant, a 4-bit quantization framework for WAMs that steers errors toward computations with less influence on final actions. It maps how each stream's quantization errors affect final actions and uses this map to guide shared channel scaling. Activation scaling is further calibrated for each stream and denoising step to accommodate changes in activation ranges and action impact. This adapts quantization to different stream requirements without duplicating weights or increasing bit-widths for selected streams. To reduce the extra kernel launches and memory traffic introduced by scaling, we develop Rudder, a 4-bit inference engine for WAMs that fuses scaling and output compensation into low-bit kernels. Under W4A8 and W4A4, SteerQuant maintains mean LIBERO success within 0.8 percentage points of full precision, while delivering up to $2.23\times$ denoising speedup over BF16 across three WAMs with reduced peak GPU memory usage. On a real dual-arm robot, W4A8 deployment achieves a $1.35\times$ end-to-end inference speedup while maintaining average task success relative to BF16.

Group-wise post-training quantizers for large language models round weights onto a grid that is not refit to the resulting integer codes. We show that this leaves accuracy on the table: the best grid depends on the codes, input correlations couple the errors of different groups, and useful code changes often involve many codes at once. We propose JARQ , a plug-in refinement that starts from any group-wise quantizer and alternates a joint least-squares fit of all group scales with bounded Babai proposals that move many codes of a group together on the current grid. The problem is a bilinear box-constrained mixed-integer least-squares problem; the solver is backpropagation-free, does not increase the layer-wise objective under exact scale solves, and keeps the host's bit width, groups, zero points, and inference cost. Across Llama-2, Llama-3, and Qwen models with RTN, GPTQ, OmniQuant, and AWQ hosts, JARQ lowers perplexity in 90 of 96 comparisons, cuts three-bit RTN perplexity by up to 36%, raises mean multiple-choice accuracy in 23 of 24 configurations, and improves QEP, QuaRot, and OJBKQ outputs, at under a minute per 7B block.

We introduce ShamAN-Q, a sub-1-bit post-training quantization method that extends NanoQuant by replacing each its diagonal reconstruction geometry with a tractable dense curvature metric, using a general paradigm popularized by the Shampoo optimizer. For each linear weight, ShamAN-Q fits a Kronecker product to the empirical Fisher information matrix of a small calibration set by Kullback--Leibler minimization, forming a Mahalanobis reconstruction loss from the result. The continuous ADMM updates from NanoQuant become solutions to Sylvester equations, while its discrete projection and deployment format remain unchanged. Because the curvature is local to a given set of weights, ShamAN-Q re-measures the input curvature statistic for each layer immediately before layer factorization, periodically refreshing all statistics on the partially quantized model. ShamAN-Q also redistributes the uniform rank from NanoQuant across layers at the same total number of bits. On Qwen3-Base, ShamAN-Q lowers WikiText-2 perplexity at $\approx$1 bpw from 27.56 to 22.96 (0.6B), 19.21 to 16.72 (1.7B), and 14.29 to 13.80 (4B) while matching or improving zero-shot accuracy on the Eleuther LM Evaluation Harness. On 0.6B, ShamAN-Q at $\approx$0.8 bpw matches the published perplexity of NanoQuant at $\approx$1.0 bpw.

Recent LLMs increasingly adopt hybrid designs that replace standard attention with linear attention, such as Gated DeltaNet (GDN) and Kimi Delta Attention (KDA). Although they compress the context into a fixed-size recurrent state and substantially reduce the cost of long-context processing, repeatedly reading and updating that state remains a major inference bottleneck. Quantization offers a natural way to reduce this cost, but can significantly degrade model quality, due to the accumulation of rounding errors and the presence of outlier rows and columns in the state. To address these challenges, we propose LeapQuant, a training-free method that achieves near-lossless performance under 8-bit recurrent-state quantization. First, to mitigate error accumulation, we propose per-window quantization, which leaps over a window of tokens and quantizes the state only once at its end. Within a window, outputs are computed from the fixed low-bit state together with high-precision buffered updates. Second, to reduce the error introduced by each quantization, LeapQuant retains the state's largest outliers as a few high-precision Compensator Tokens, which share the update path of real tokens. We then smooth the remaining residual before quantization to further reduce the error. Comprehensive experiments across the Qwen, Kimi, and GLM model families show that LeapQuant substantially reduces memory and compute costs during inference. With accuracy comparable to the FP32 baseline, it achieves average speedups of 2.05--3.70$\times$ at the kernel level and 1.47$\times$ for end-to-end inference on NVIDIA B200, RTX PRO 6000, and RTX 5090 GPUs.

Multi-Head Latent Attention (MLA) enables expressive multi-head attention with compact caches for its content and decoupled RoPE paths, yet cache memory still scales linearly with context length and batch size. In this work, we establish a systematic model of MLA's dual-path quantization errors, characterizing their distinct effects on attention-output distortion and explaining the pronounced amplification of RoPE-path errors. Guided by this analysis, we introduce QuantMLA, a function-aligned framework for low-bit dual-path quantization. We derive path-specific transformation spaces that preserve full-precision computation while remaining fully fusible into model parameters offline, eliminating online transformation overhead. Within these spaces, QuantMLA learns path-specific transformations with function-aligned objectives: attention-output reconstruction captures the content path's coupled matching and aggregation errors, while positional QK reconstruction preserves the RoPE-induced component of the attention logits and admits a theoretical bound on output distortion. Across four MLA model families, QuantMLA enables, to our knowledge, the first reported joint INT4 caching of the content and RoPE caches with minimal accuracy degradation. Further compressing the content cache to INT2 while retaining the RoPE key cache at INT4 maintains competitive performance on challenging reasoning and code benchmarks. We develop a native low-bit MLA attention kernel that integrates unpacking and dequantization directly into attention computation. The physical cache layout provides 3.59x compression at 128K context, while a cache-pressure serving workload achieves 5.168x higher whole-job output throughput than BF16. The code will be released upon acceptance.

Uniform random rotations are an effective preprocessing step for quantization: they make normalized coordinate distributions approximately Gaussian, enabling the use of codebooks optimized offline. We introduce TORQUE, a framework that improves on previous quantization works that use random rotations by jointly optimizing how many and which coordinates to preserve at high precision both before and after rotation, under a fixed overall expected bit budget. Intuitively, before rotation, preserving large input coordinates at high precision can reduce overall error by preventing the rotation from spreading their values across many coordinates. Likewise, after rotation, preserving a small fraction of the largest-magnitude coordinates at high precision allows the remaining values to be quantized more accurately using codebooks optimized offline for the resulting truncated Gaussian distribution. We derive a quantization error upper bound and prove that top-$k$ pre-rotation retention minimizes it for each $k$. This reduces the search over coordinate subsets to an optimization over $k$, enabling a fast optimizer that uses offline codebooks and parallel parameter selection for practical implementation. We demonstrate an improved tradeoff between reconstruction accuracy and storage cost through numerical evaluation under the Gaussian model and experiments on nearest-neighbor retrieval, KV-cache compression, and activation compression.

Analog in-memory computing (IMC) offers a promising path toward energy-efficient large language model (LLM) inference by executing matrix multiplications (MatMul) directly within memory arrays in the analog domain. Its efficiency, however, comes with an additional source of error: limited-precision analog-to-digital converters (ADCs) quantize accumulated analog partial sums, introducing output-side error distinct from conventional activation and weight quantization at the MatMul inputs. Clipping can mitigate both operand and ADC quantization errors, but the optimal clipping factors must jointly balance activation rounding and clipping, weight rounding and clipping, and ADC quantization. Existing clipping methods, designed for digital quantization, do not explicitly optimize these coupled sources of IMC error and often rely on costly search-based calibration. We introduce IMC-CLINIC (Coupled Loss-Informed Newton Iterations for Clipping), a clipping calibration framework based on an analytical surrogate for IMC MatMul output error. The surrogate jointly models operand quantization, accumulated clipping-induced bias, and ADC quantization, enabling efficient evaluation of its gradient and approximate curvature from a small calibration set. IMC-CLINIC jointly optimizes activation and weight clipping factors using a safeguarded Newton-type method. Across multiple models and datasets, it improves average zero-shot accuracy by 6.5-11.5 percentage points over the grid search baseline while reducing calibration time by factors of 10.0-12.1. Its analytical surrogate closely tracks empirical IMC output error, and its optimizer is certified within 1% of the global optimum under the loss objective across all projections on two representative models.

Most post-training quantization pipelines fit each weight matrix to its pretrained counterpart, one matrix at a time. Whether that proxy tracks what an attention block actually computes, or how errors in the Q, K and V projections compound inside the softmax, is rarely checked. We write the objective on the attention output instead, over all three projections at once, and reuse it throughout the pipeline. JAB defines one scalar loss over the joint Q, K, V weights of a block, evaluated against the block's real causally-masked attention output, and uses it twice: to fit the quantized weights (GPTQ warm start, then STE with learnable scales), and to score the block for a multiple-choice knapsack allocation. On attention-only quantization of Mistral-7B this works. At 3 bits JAB recovers 77-90% of the gap between uniform GPTQ and full precision, and its sensitivity estimate tracks an oracle costing 73 forward passes to within a fraction of a point. It stops working once MLP layers enter the allocation. A role-aware offset rule needing no sensitivity estimate at all beats JAB on GPT-2's MLP and on the full Mistral-7B model: with a 3-bit floor it quantizes 96.4% of the weights to 4.5 bits per parameter at 6.933 perplexity, within 4.4% of full precision (6.643) at 3.56x compression, against 7.158 for JAB at the same budget. Which matrix a weight sits in matters more than any sensitivity estimate we computed. Two things came out sideways. Block-local reconstruction is an unreliable proxy for end-to-end perplexity: one run improved a block's own objective 4.6x while perplexity rose 32x, which is why every allocation here is validated end-to-end. And on attention-only quantization, fine-tuning moved weights farther from their pretrained values while pulling attention outputs closer, with net gains. Post-training seems to recover attention behavior, not weights.

Four-bit post-training quantization can reduce the memory demands of large language models, but preserving accuracy under strict MXFP4 W4A4 requires coordinating several design choices. Coordinate transforms change block-encoding errors, which in turn affect the residuals propagated through the network. The useful algorithmic decomposition is therefore not fully known before search. LLM-driven program evolution offers a way to explore these choices, but performance scores alone do not explain which design should change next. We introduce QuantForge, a PTQ discovery system that records competing explanations, selects controls that distinguish them, and checks that successor code implements the resulting conclusions. This residual compilation guides program revisions while retaining useful programs even when their original explanations are rejected. Remeasuring the revised program reveals the next error to address. This process discovers HiRes, a fixed MXFP4 quantizer that shapes coordinates, refines legal code assignments, and recovers errors along attention and MLP paths. Each stage acts on residuals measured after the preceding stage has executed. Across seven tasks, HiRes achieves the lowest seven-model Robust Fit (0.09300) and the lowest quantized Fit-7 at 32B. In matched-budget comparisons of LLM-driven program evolution, each with 240 evaluator calls, QuantForge reaches a held-out transfer target in six of eight runs, compared with three each for textual memory and reflection memory, and one for score-only evolution, despite evaluating fewer new programs. These results show that QuantForge improves the discovery of transferable PTQ algorithms by turning controlled evidence into subsequent program changes.

Post-training quantization (PTQ) efficiently compresses Vision Transformers (ViTs) without retraining, yet suffers severe accuracy degradation at low bit-widths. Existing optimization-based PTQ methods guide block reconstruction via either soft logits or second-order Hessian proxies. Logit supervision is prone to overfitting on limited calibration data, while Hessian approximations incur structural truncation errors. To address these limitations, we propose \textbf{GLF-Q}, a novel PTQ framework guided by Global-Local Feature alignment. GLF-Q propagates quantized block outputs through downstream full-precision layers to align penultimate-layer representations under local output regularization, providing downstream feature supervision without explicitly approximating the Hessian or using a Taylor expansion. Furthermore, offline Hadamard transformations are introduced with zero runtime overhead to disperse activation outliers across channels, effectively contracting dynamic ranges and reducing quantization errors. Meanwhile, optimizing this loss via a Straight-Through Estimator (STE) achieves rapid convergence, bypassing continuous relaxation rounding formulations such as AdaRound. Extensive experiments across representative ViT architectures demonstrate that GLF-Q with standard uniform quantizers substantially outperforms state-of-the-art methods under 3-bit quantization on image classification. In addition, GLF-Q exhibits strong out-of-domain calibration robustness and achieves speedups under 8-bit GPU deployment.

Large language models (LLMs) achieve strong performance across many tasks but rely on dense multiply-accumulate (MAC) operations during inference, resulting in high energy cost. Spiking neural networks (SNNs) offer an event-driven alternative in which synaptic integration uses lightweight accumulation. However, spike-driven LLM inference remains difficult because outlier-heavy activations typically require long firing windows or auxiliary non-spiking paths. We propose QuantaSpike, a short-window spike-driven quantization framework for LLMs built around Logarithmic Ternary Integrate-and-Fire (LTIF) neurons. LTIF uses ternary events with power-of-two membrane-response quanta, improving the information represented by each firing step while retaining shift-ACC-compatible computation. QuantaSpike combines this neuron with group-adaptive gain and selective outlier admission: normal values use residual LTIF steps, whereas admitted outliers receive one additional onset spike before entering the same residual dynamics. Across OPT and Llama-2, QuantaSpike achieves state-of-the-art or competitive perplexity and zero-shot accuracy among spike-driven LLM quantization methods. It also transfers to newer dense LLMs, remaining close to the FP16 reference on Llama-3-8B and Qwen3-8B under the same four-step firing window. Analytical linear-energy projections show that QuantaSpike reduces the energy of one linear transformation by about $80.0\%$ on OPT models and $67.1\%$ on Llama-2 models relative to SpikeQuant, providing an accurate and energy-efficient spike-driven path for LLM inference.