Prior Reinforce: Goal-Conditioned Dynamic Manipulation with Limited Trials

Dynamic manipulation is a critical capability for robots operating in complex and dynamic environments, where robots must interact with objects that are moving or require rapid adjustments. However, learning models for dynamic manipulation tasks face two major challenges: (1) the combinatorial complexity of dynamic scenarios leads to substantial data requirements, and (2) rapid variations in dynamics require real-time and accurate policy execution. In this paper, we propose DynamicManip to address these challenges through an efficient data augmentation pipeline and a low-latency imitation policy. We first propose a static-to-dynamic augmentation pipeline that synthesizes diverse dynamic manipulation demonstrations from a single static demonstration. Second, we introduce a dynamic-aware adaptive policy that adjusts its inference frequency according to task dynamics, enabling responsive and effective dynamic manipulation. Third, we build a dynamic manipulation benchmark, which includes diverse dynamic tasks with an automatic evaluation system for scalable and consistent assessment. Extensive experiments in both simulation and the real world demonstrate that DynamicManip not only provides significant improvements in data efficiency but also achieves better performance in dynamic manipulation tasks, with a mean success rate 18.4 percentage points higher and policy-query latency 32.9% lower.

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

Affordance-guided imitation learning has shown impressive performance in robotic manipulation tasks by compressing visual perception into task-specific geometric constraints (e.g., fixed contact points). However, the commonly used static affordances can become inconsistent in precision-critical tasks or under object location perturbations, leading to post-contact trajectory drift. To address this issue, we propose AffordTrajDP, a dynamic framework that constructs affordance trajectories via object-centric temporal propagation to guide the progressive manipulation process. Specifically, given an RGB-D observation, our core insight is that a retrieved anchor affordance, which captures the desired contact point between the end-effector and the target object, can be propagated forward via affordance propagation, using the object's SE(3) pose as a natural propagation medium, to yield an affordance trajectory that provides temporally consistent, state-aware guidance throughout execution. AffordTrajDP achieves 70.0% average success rate on ManiSkill3, outperforming strong baselines by up to 17.8%. Real-world experiments on Galaxea A1 and UR7e robotic arms, covering StackCube, PickCup, AdapterInsertion, Ring-on-Peg, Put-in-Bowl, and USB Insertion, further validate robustness under object placement variations and appearance changes, with seen and unseen object instances evaluated on Galaxea A1, and ablations confirm the contribution of each proposed component.