eess.SPOct 31, 2025

Estimation of aboveground biomass in a tropical dry forest: An intercomparison of airborne, unmanned, and space laser scanning

Authors: Nelson Mattié, Arturo Sanchez-Azofeifa, Pablo Crespo-Peremarch, Juan-Ygnacio López-Hernández

Organizations: University of Alberta, Alberta Centre for Earth Observation Sciences, Department of Earth and Atmospheric Sciences, University of Alberta, AB, T6G 2E3, Edmonton, Canada · Universitat Politècnica de València, Geo-Environmental Cartography and Remote Sensing Group (CGAT), Department of Cartographic Engineering, Geodesy and Photogrammetry, Camí de Vera s/n, 46022, València, Spain · University of Los Andes, Photogrammetry and Remote Sensing Laboratory, Vía Chorros de Milla, Mérida, 1511, Mérida, Venezuela

Abstract

Accurate aboveground biomass (AGB) estimates are needed to report forest carbon under the Paris Agreement, yet tropical dry forests (TDFs) remain among the least studied tropical ecosystems. We present a plot-level intercomparison of airborne (ALS), unmanned (ULS) and simulated spaceborne full-waveform (SLS, GEDI simulator) laser scanning for AGB estimation in ten permanent plots of Santa Rosa National Park, Costa Rica, covering early to late succession. Reference AGB (22-220 Mg/ha) was computed from the 2021 census with a documented procedure that screens diameter time series and propagates measurement, wood-density and allometric errors (plot uncertainty 3.5-14.5%). We compared ordinary least squares (OLS), a log-log model of mean canopy height fixed a priori and a single-metric model selected from the data, with support vector machine regression (SVM). Predictor selection, scaling and hyper-parameter tuning were nested within leave-one-plot-out validation. ALS gave the lowest errors: the a priori OLS model reached an RMSE of 32.3 Mg/ha (29%, R2_LOO = 0.77) and SVM 35.8 Mg/ha (32%). SVM did not improve on OLS for any platform and was significantly worse with ULS (p = 0.01). The best ULS and SLS models reached 33% and 37%; differences between platforms were not significant with ten plots. Selecting predictors on all plots before cross-validation lowered the apparent SVM error by up to 23 percentage points, and footprint coordinates, ALS point density and terrain elevation from the GEDI simulator produced spurious skill; these effects explain the higher accuracies reported in an earlier version of this work. Model errors remained at least 2.5 times larger than the field-AGB uncertainty. With small plot networks, a height-based OLS model with ALS is the most robust choice, and more and larger plots are needed before nonlinear models can be shown to add value in TDFs.

Explore similar work

Aug 12, 2026

Transferable Above-Ground Biomass (AGB) Estimation Model from Multi-Sensor Data with Sparse Field Calibration

Spatially continuous quantification of forest above-ground biomass (AGB) is what makes carbon accounting credible and mitigation strategies actionable. While field inventories provide high localized accuracy, they are spatially sparse; conversely, spaceborne LiDAR from the Global Ecosystem Dynamics Investigation (GEDI) offers broad biomass samples but lacks spatial continuity and systematic underestimation of high-biomass forests. This paper presents an operational framework centered on a single globally trained convolutional neural network (CNN) that is seamlessly adapted to each new landscape through a lightweight empirical field-calibration workflow. The global model combines optical (Sentinel-2), C-band SAR (Sentinel-1), L-band SAR (ALOS-2 PALSAR-2), and terrain (DEM) data. It is trained once against GEDI Level-4A biomass reference data spanning multiple regions and both wet and dry seasons so that it learns the persistent woody-structure rather than a single-date appearance. To avoid retraining for every landscape, the framework applies a small number of local field plots to fit a scale-and-bias correction that aligns the global prediction with ground truth in each region. The pipeline harmonizes sensor data onto a shared 10 m grid, derives vegetation indices and polarimetric ratios, computes per-band normalization stats, and trains the CNN with a hybrid log-domain SmoothL1 with RMSE loss for skewed biomass distribution. On held-out validation the global GEDI-based model achieved R^2 approximately 0.78 and RMSE approximately 22 Mg/ha. A subsequent field calibration combining Random Forest fine-tuning under a 10-fold cross-validation eliminates localized regional biases. This improves local validation performance to R^2 approximately 0.82 and reduces RMSE to approximately 15 Mg/ha, outperforming both the uncalibrated global model and the ESA CCI Biomass product against field plots.
Jun 24, 2026

Self-Supervised Tree-level Biomass Estimation in Urban Environments From Airborne LiDAR and Optical Observations

Urban tree biomass remains less spatially explicitly quantified than biomass in managed forests because many estimates rely on inventories or coarse products that cannot resolve individual crowns or fine-scale heterogeneity. We present a crown-level above-ground biomass (AGB) framework for an 810km2^2 landscape in Ontario, Canada, using leaf-off airborne LiDAR (8--10pulsesm−2^{-2}) and near-infrared RGB orthophotography (0.16--0.20m) from 2018 and 2023. A dual-stream cross-attention network trained on rule-based pseudo-labels produced semantic marks for buildings, needleleaf trees, and deciduous trees, supporting crown delineation and functional-type assignment. On independently annotated withheld tiles, global/mean precision, recall, and Dice scores were 0.86, 0.83, and 0.84. Crowns were delineated with multiscale watershed segmentation in mapped tree areas, and AGB was estimated from a crown area--height power-law proxy calibrated to species-specific allometry (Lambert et al., 2005) for 21,921 inventory trees. For 18,713 inventory--segment matched pairs from a 90,726-tree held-out test set, AGB prediction achieved R2=0.609R^2=0.609 using inventory crown geometry and R2=0.570R^2=0.570 under operational segmentation, identifying crown delineation as the remaining uncertainty source. Aggregated to 30m, estimates yielded total AGB stocks of 1.73Tg in 2018 and 1.81Tg in 2023 (811--850GgC), local densities up to ∼140{\sim}140Mgha−1^{-1} along the Niagara Escarpment, and a net carbon gain of 39Gg~C over five years. Deep-ensemble uncertainty maps highlighted high-epistemic-uncertainty areas linked to underrepresented land covers and guided assignment of uncertain crowns to a pooled allometric equation. The framework uses standard provincial data, requires no manual annotation, and produces a public bitemporal crown-level AGB database for trees outside forests at management-relevant resolution.
Jul 6, 2026

Shifting from Discrete to Continuous Reference Data: QSM-Derived Horizontal Tree Biomass Distribution for Deep Learning Biomass Estimation

Conventional modeling approaches for LiDAR-based above-ground biomass (AGB) estimation rely on discrete plot-level inventory aggregates. This methodology introduces boundary-effect uncertainties that may severely degrade model performance within small field plots. To solve this limitation, we evaluate a Horizontal Biomass Distribution (HBD) reference mapped continuously from Quantitative Structure Models (QSMs). We trained a sparse 3D U-Net on simulated broadleaved forest structures using three AGB reference types: a standard forest inventory (FI) plot-level aggregate, an edge-effect-free QSM plot-level aggregate, and a continuous HBD mapping. Evaluating training plot sizes scaling from 100 to 2500 m2m^2 , QSM-based models systematically outperformed FI approaches at small plot sizes. Specifically, for 100 m2m^2 plots, the HBD reference reduced the relative root mean square error (RRMSE) by 16.84 ±\pm 4.37 % and increased R2R^2 by 0.22 ±\pm 0.05 against the FI baseline. By replacing plot level aggregates with HBDs as AGB reference, this methodology corrects for edge-effects and shows that using an HBD-based reference enhances model performance for small plot sizes.