SHIELD8-UAV: Sequential 8-bit Hardware Implementation of a Precision-Aware 1D-F-CNN for Low-Energy UAV Acoustic Detection and Temporal Tracking

Unmanned aerial vehicle (UAV) object detection requires compact detectors that retain small-object details under onboard computation and memory constraints. Repeated downsampling inlightweight networks weakens shallow spatial information, while manually adding attention orfusion modules may increase cost without stable gains. This study analyzes YOLOX-Nano underedge-deployment constraints by combining a P2 high-resolution detection branch with a quantum-inspired evolutionary algorithm (QIEA) for lightweight structure screening. The search space isdefined by lightweight priority and task specificity, and the evaluation jointly considers accuracy,floating-point operations (FLOPs), latency, memory consumption, and recall. On VisDrone, theP2 branch increases APamall by 31.10% over the YOLOX-Nano baseline. Compared with NanoDet-Plus with similar model size, YOLOX-Nano+-P2 improves APs0.ss by 17.5% and APamal by 44.9%.The QIEA-selected candidate obtains the highest Recallso, but +P2 remains the strongest AP-oriented variant after full training. Full 100-epoch verification of Random-best, GA-best, andSA/QUBO-best candidates further shows that proxy rankings do not necessarily transfer to finalAPse9s. These results support using P2 as the main small-object enhancement path and QIEA as alightweight tool for candidate screening and accuracy-cost analysis. The source code, configurationfiles, diagnostic scripts, and summarized results are available at https://github.com/Ming23233/UAV-QIEA-Edge-Detection

Weeds compete with crops for light, water, and nutrients, reducing yield and crop quality. Efficient weed detection is essential for site-specific weed management (SSWM). Although deep learning models have been deployed on UAV-based edge systems, a systematic understanding of how different model architectures perform under real-world resource constraints is still lacking. To address this gap, this study proposes a deployment-oriented framework for real-time UAV-based weed detection on resource-constrained edge platforms. The framework integrates UAV data acquisition, model development, and on-device inference, with a focus on balancing detection accuracy and computational efficiency. A diverse set of state-of-the-art object detection models is evaluated, including convolution-based YOLO models (v8-v12) and transformer-based RT-DETR models (v1-v2). Experiments on three edge devices (Jetson Orin Nano, Jetson AGX Xavier, and Jetson AGX Orin) demonstrate clear trade-offs between accuracy and inference latency across models and hardware configurations. Results show that high-capacity models achieve up to 86.9% mAP50 but suffer from high latency, limiting real-time deployment. In contrast, lightweight models achieve 66%-71% mAP50 with significantly lower latency, enabling real-time performance. Among all models, RT-DETRv2-R50-M achieves competitive accuracy (79% mAP50) with improved efficiency, while YOLOv10n provides the fastest inference speed. YOLOv11s and RT-DETRv2-R50-M offer the best balance between accuracy and speed, making them strong candidates for real-time UAV deployment.

As unmanned aerial vehicles (UAVs) become increasingly prevalent in consumer and defense settings, classifying them reliably from limited, modality-specific data is an urgent challenge. The dominant approach, large pretrained networks fully fine-tuned on task data, carries a substantial computational and memory weight that is hard to bear in resource-constrained UAV deployments, where edge inference and rapid retraining for emerging platforms are both required. This paper systematically scales across both model architectures and fine-tuning methods for UAV audio classification, asking when that weight is justified and when lighter alternatives prevail. Using a custom dataset of 3,100 audio clips spanning 31 drone classes, we evaluate transformer (ViT, AST) and convolutional (custom CNN, ResNet-18/152, MobileNet-V3-S/L, EfficientNet-B0/B7) backbones under full fine-tuning, classifier-only fine-tuning, and four parameter-efficient fine-tuning (PEFT) methods: SSF, IA3, OFT, and selective batch-norm tuning. All configurations are evaluated with 5-fold cross-validation across accuracy, training time, trainable-parameter share, and inference-time memory footprint. Selective batch-norm fine-tuning of EfficientNet-B7 with three-fold augmentations achieves the highest validation accuracy (97.65% +- 0.30) while updating under 0.5% of model parameters. Across the sweep, lightweight CNNs consistently outperform transformers on both accuracy and efficiency. For UAV audio classification under data scarcity, scaling the method outperforms scaling the model.