Autonomous robotic systems are increasingly deployed for mapping, monitoring, and inspection in complex and unstructured environments. However, most existing path planning approaches remain domain-specific (i.e., in the air, on land, or at sea), limiting their scalability and cross-platform applicability. This article presents OmniPlanner, a unified planning framework for autonomous exploration and inspection across aerial, ground, and underwater robots. The method integrates volumetric exploration and viewpoint-based inspection, alongside target reach behaviors within a single modular architecture, complemented by a platform abstraction layer that captures morphology-specific sensing, traversability and motion constraints. This enables the same planning strategy to generalize across distinct mobility domains with minimal retuning. The framework is validated through extensive simulation studies and field deployments in underground mines, industrial facilities, forests, submarine bunkers, and structured outdoor environments. Across these diverse scenarios, OmniPlanner demonstrates robust performance, consistent cross-domain generalization, and improved exploration and inspection efficiency compared to representative state-of-the-art baselines. Videos presenting the OmniPlanner framework and demonstrating its field deployments across aerial, ground, and underwater robots are available at https://ntnu-arl.github.io/omniplanner, and the source code is publicly available at https://github.com/ntnu-arl/gbplanner_ros/tree/gbplanner3.
Indoor infrastructure inspection, such as tunnels and industrial facilities, requires systematic surface coverage to ensure that all inspection targets are properly observed. Unmanned Aerial Vehicles (UAVs) offer an alternative to manual inspection by conducting map-guided surface inspection using prior structural models. However, in practice, indoor inspection often relies on floorplan-derived reference maps that may not reflect unforeseen obstacles, such as temporary structures or equipment, leading to occluded viewpoints and degraded inspection quality. Existing coverage planning methods typically assume a fully known inspection environment and perform deterministic global viewpoint optimization based on accurate prior maps, making them vulnerable to environmental discrepancies during execution. This work presents an adaptive UAV inspection framework for partially known structured indoor environments. The proposed method integrates a segment-based global coverage planner with an inspection-oriented local view-angle adaptation module. The global planner organizes planar inspection targets into surface-aligned clusters to generate compact viewpoint sequences with improved orientation consistency. The local planner generates collision-free trajectories and adjusts the viewing direction online to mitigate occlusion-induced coverage loss while preserving the planned trajectory structure. The simulation results across randomized scene configurations demonstrate that the proposed global planner achieves near-complete coverage while reducing trajectory length compared to representative baselines. Real-world flight experiments further validate that the framework produces usable inspection data for downstream analysis. These results indicate that the proposed framework improves inspection efficiency and adaptability in partially known structured indoor environments.
Autonomous exploration is critical for robot mapping unknown environments. Desirable characteristics of exploration algorithms include compute efficiency and small traversed distance during the exploration process. Motivated by these, we present Omnidirectional Path-efficient Aerial 3D expLoration (OPAL), an exploration framework centered on deliberate 360-degree yaw rotation at ambiguous branch points rather than compute-heavy global tour planning. We devise multiple variants of OPAL to determine the frontier-selection strategy once the yaw pan is completed. One variant is model-free, while others use large language models (LLMs) or vision-language models (VLMs). We characterize the performance of these variants while varying the vicinity search radius to include frontiers in the selection process. Through simulations we find that although the time-consuming in-place yaw rotation increases total exploration time relative to more computationally complex baselines such as EDEN and FALCON, OPAL is computationally simpler and achieves shorter travel distances and higher coverage-versus-distance area under the curve. We also show that adjusting the frontier-selection search radius enables a tradeoff between travel distance and total exploration time. We verify our results on a Modal AI drone in two indoor environments by comparing OPAL against FALCON, and find that the traveled distance for a variant of OPAL to be as much as 25% lower than FALCON.
Autonomous exploration on uneven terrain requires ground robots to balance exploration efficiency, coverage completeness, and terrain safety. Detailed tsrrain reasoning improves local reliability but can slow large-scale exploration, whereas coarse region guidance expands quickly in open areas but can miss narrow passages and irregular traversable boundaries. To address this challenge, this paper presents TASG-Explore, a traversability-aware sector-guided exploration framework for ground robots. The framework first performs hierarchical traversability analysis using variable-voxel ground fitting and adaptive 8-bit obstacle encoding. It then splitting cost map into sectors, incrementally updates sector clusters, extracts terrain-coupled frontier viewpoints, and maintains a dynamic topological roadmap with unknown topological hypotheses. Finally, a sector-guided planner selects region targets and inserts local viewpoints to generate efficient exploration routes. Benchmark experiments in diverse challenging environments, including caves, forests, and rugged hills, show that TASG-Explore achieves the best overall performance among six representative state-of-the-art planners. The proposed traversability analysis improves processing efficiency by 6.3 times while maintaining high accuracy, and the exploration planner improves exploration efficiency by 51% and increases coverage by up to 2.95 times in rugged hill scene. Large-scale real-world experiments further demonstrate the practical value of the proposed method.