cs.ROMar 10, 2026

NanoBench: A Multi-Task Benchmark Dataset for Nano-Quadrotor System Identification, Control, and State Estimation

Authors: Syed Izzat Ullah, Jose Baca

Abstract

Existing aerial-robotics benchmarks target vehicles from hundreds of grams to several kilograms and typically expose only high-level state data. They omit the actuator-level signals required to study nano-scale quadrotors, where low-Reynoldsnumber aerodynamics, coreless DC motor nonlinearities, and severe computational constraints invalidate models and controllers developed for larger vehicles. We introduce NanoBench, an open-source multi-task benchmark collected on the commercially available Crazyflie 2.1 nano-quadrotor (takeoff weight 27 g) in a Vicon motion capture arena. The dataset comprises 172 flight recordings spanning multi-frequency excitation, geometric trajectory tracking at three speed regimes, and long-duration battery-drain hover. Each recording provides synchronized Vicon ground truth, raw IMU data, onboard extended Kalman filter (EKF) estimates, PID controller internals, and motor PWM commands at 100 Hz, alongside battery telemetry at 10 Hz, crossaligned by gyroscope-based correlation on a 1 ms search grid. NanoBench defines standardized evaluation protocols, train/test splits, and open-source baselines for three tasks: nonlinear system identification, closed-loop controller benchmarking, and onboard state estimation assessment. To our knowledge, it is the first public dataset to jointly provide actuator commands, controller internals, and estimator outputs with millimeter-accurate ground truth on a commercially available nano-scale aerial platform.

Explore similar work

CardsList
Jul 28, 2026cs.RO

Physics-Aware End-to-End Deep Reinforcement Learning for Quadcopter Control with Actuator Dynamics

Unmanned aerial vehicles (UAVs), particularly quadcopters, present unique challenges for autonomous control due to their underactuated dynamics: only four available control inputs must govern six degrees of freedom. This paper investigates a physics-aware, end-to-end deep reinforcement learning (DRL) approach that acts directly on low-level body inputs, total thrust and body torques (T,τx,τy,τz)(T, τ_x, τ_y, τ_z), and closes the loop through a high-fidelity Simulink environment. Our simulator integrates a 12-state rigid-body model (MATLAB Level-2 S-Function) with (i) an Action2RPM allocation based on the Moore-Penrose pseudo-inverse of a coefficient matrix derived from thrust and drag terms, and (ii) first-order actuator dynamics for each motor (time constant Tm=0.076T_m = 0.076 s), including rotor gyroscopic coupling. A shaped reward balances goal-reaching and stability using an exponential position well, attitude penalties, and quadratic velocity costs. Four DRL algorithms, DDPG, TD3, PPO, and SAC, are evaluated in two stages: (S1) thrust-only hover and (S2) hover with pitch torque and a translated goal. Results show that SAC and TD3 achieve superior stability and exploration efficiency, while PPO is less sample-efficient. The study highlights the significance of modeling actuator lags and aerodynamic moments for stable low-level control and provides a reproducible benchmark for quadcopter DRL.
Ya-Chia Shen, Woei-Leong Chan
Quadrotor ControlIterative Reinforcement LearningActuatorUnmanned Aerial VehiclesDeep Reinforcement Learning
AskPDF
Jul 14, 2026cs.RO

Flatness-Preserving Residual Learning for Real-Time Tight Quadrotor Formation Flight

Quadrotors flying in tight formations are severely affected by turbulent aerodynamic interactions, such as downwash, that can cause catastrophic collisions if left unmodeled. To compensate for these effects, we propose a physics-informed residual dynamics learning framework that captures complex aerodynamic interactions while ensuring the joint multi-quadrotor system remains differentially flat. We leverage this preserved flatness to design a computationally efficient feedback linearization controller that is easily tunable with linear control techniques and cancels aerodynamic disturbances via feedforward compensation. Hardware experiments demonstrate our framework reduces average tracking errors by 31% compared to nominal baselines. Crucially, our lightweight approach matches the tracking performance of state-of-the-art nonlinear model predictive control (NMPC) while requiring an order of magnitude less computation. We are the first to show that stable, tight formation flight can be achieved with under 30 seconds of training data and a 5ms loop rate, unlocking high-fidelity aerodynamic compensation for compute-constrained flight stacks.
Pei-An Hsieh, Fengjun Yang, Nikolai Matni +1
Quadrotor ControlFlight PerformanceAerodynamicsModel Predictive ControlResidual Learning
AskPDF
Sep 1, 2026cs.RO

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.
Yutong Wang, Dongjae Lee, Xiaofeng Guo +9
Aerial ManipulationRobotic Manipulation Policies
AskPDF