cond-mat.mtrl-sciMar 12, 2026

Optimal Experimental Design for Reliable Learning of History-Dependent Constitutive Laws

Authors: Kaushik Bhattacharya, Lianghao Cao, Andrew Stuart

Organizations: California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125, USA.

Read PDF
Ask AI
Cite

Copy citation

DOINot available for this paper

Abstract

History-dependent constitutive models serve as macroscopic closures for the aggregated effects of micromechanics. Their parameters are typically learned from experimental data. With a limited experimental budget, eliciting the full range of responses needed to characterize the constitutive relation can be difficult. As a result, the data can be well explained by a range of parameter choices, leading to parameter estimates that are uncertain or unreliable. To address this issue, we propose a Bayesian optimal experimental design framework to quantify, interpret, and maximize the utility of experimental designs for reliable learning of history-dependent constitutive models. In this framework, the design utility is defined as the expected reduction in parametric uncertainty or the expected information gain. This enables in silico design optimization using simulated data and reduces the cost of physical experiments for reliable parameter identification. We introduce two approximations that make this framework practical for advanced material testing with expensive forward models and high-dimensional data: (i) a Gaussian approximation of the expected information gain, and (ii) a surrogate approximation of the Fisher information matrix. The former enables efficient design optimization and interpretation, while the latter extends this approach to batched design optimization by amortizing the cost of repeated utility evaluations. Our numerical studies of uniaxial tests for viscoelastic solids show that optimized specimen geometries and loading paths yield image and force data that significantly improve parameter identifiability relative to random designs, especially for parameters associated with memory effects.

Figures & tables

Figure 1: A visualization of a model for the described uniaxial test with loading path and specimen shape design. The dots on the loading path, i.e., the prescribed strain, are the control points. The color on the deformed material represents the magnitude of the displacement.
Figure 2: A visualization of the observation operator for a single snapshot of image data at time tt for the uniaxial testing described in Section 3.1 .
Figure 3: An example of the uniaxial testing setup and the design variables. ( Left ) The setup and the specimen geometry design. ( Right ) The loading path design.
Physical ParameterDescriptionBound
log⁡E1(0)\log E_{1}^{(0)}Log. of equilibrium modulus in 11 -dir.(2.0, 3.5)
rEr_{E}Equilibrium modulus anisotropy, E2/E1E_{2}/E_{1}(0.2, 1)
rGr_{G}Normalized shear, G/E1E2G/\sqrt{E_{1}E_{2}}(0.2, 0.8)
rνr_{\nu}Poisson’s ratio product, ν12ν21\nu_{12}\nu_{21}(0.0, 0.2)
αc\alpha_{c}Material axis angle(- π\pi /4, π\pi /4)
fif_{i} , i=1,2i=1,2Total relaxed fraction in dir. ii(0.2, 0.8)
Table 1: The bounds for the uniform distributions of the physical parameters in the re-parameterized linear viscoelastic constitutive model.
Figure 4: An example of simulated force and image data for learning linear viscoelasticity. This simulated dataset is created via the experimental setup in Sections 5.1 and 3 , and the constitutive parameters are drawn from the prior. Note that the resolution of the image data visualized here is much lower than that of the actual data used in the numerical study; see an image snapshot with high resolution in Figure 17 . The material deformation is discernible yet small due to the narrow range of the imposed strain ( <5%<5\% ) suitable for linear viscoelasticity.
Figure 5: The surrogate FIM testing accuracy as a function of training sample size for designing uniaxial tests of linear and nonlinear viscoelastic materials in Sections 5 and 6 , respectively. The solid and dashed lines indicate the mean relative errors for predicting the log. FIM (measured in the Frobenius norm) and the approximate information gain, respectively. The surrogate prediction of the approximate information gain is obtained from the surrogate FIM predictions using 16 .
Figure 6: The optimized designs of uniaxial test for reliable learning of linear viscoelasticity found by EGA and ESFIM maximization. ( Left ) Comparison of the EGA values at random, EGA-optimized, and ESFIM-optimized designs. ( Right ) Visualization of the optimized designs found via EGA maximization and ESFIM maximization.
Figure 7: Visualizations and statistics of the 95% CIs for constitutive parameters of linear viscoelasticity inferred from experiments with random, ESFIM-optimized, and EGA-optimized designs. ( Top ) The box plots of the 95% CI sizes. The size distributions arise from the prior-based variation in the experimental outcomes. For random designs, the distributions also account for design variations. ( Bottom ) The relative expected reduction of the 95% CI sizes by optimized designs relative to random designs. The 95% CI sizes are estimated for θ\theta , which is transformed as in Section 5.1 from the physical parameters used as labels.
Figure 8: The normalized EGA design utility for learning marginal parameters of linear viscoelasticity grouped by material behaviors. ( Left ) The bar plots of the utility of random, ESFIM-optimized, and EGA-optimized designs for learning elasticity, anisotropy, viscosity, and relaxation. The error bars for the random designs represent the standard deviations of EGA with respect to the design variables. In contrast, the error bars for the optimized designs represent the standard errors of EGA attributed to finite parameter sample sizes. ( Right ) The expected improvement in the utility of optimized design relative to random designs for learning different behaviors.
Figure 9: Relation between principal-stress-based stress-state entropy and EGA for randomly selected designs and the EGA-optimized design. The EGA-optimized design also has the largest stress-state entropy, with an overall rank correlation of 0.670.67 .
Figure 10: The optimal batched designs of uniaxial testing for learning linear viscoelasticity found by ESFIM maximization. The designs in the top panel vary in geometry within their batches, whereas those in the bottom panel share the same geometry.
Figure 11: Visualization and statistics of the EGA design utility values of batched designs for uniaxial testing of linear viscoelastic materials. ( Left ) The EGA values for random and ESFIM-optimized (batched) designs of 1–3 experiments. ( Right ) Relative expected improvements of the EGA for the optimized designs with batch sizes of 1–3 compared to random designs with batch sizes of 1–3.
 Physical ParameterDescriptionBound
Equilibriumlog⁡μ∞\log\mu_{\infty}Log. of eq. shear modulus(-1.5, -0.5)
ν\nuInitial Poisson ratio(0.45, 0.49)
ϕf\phi_{f}Eq. fiber stiffness-to-shear log. ratio(0, 3)
log⁡k2\log k_{2}Log. of eq. fiber stiffening rate(-1, 1)
αf\alpha_{f}Fiber orientation angle(- π\pi /4, π\pi /4)
Non-Equilibriumqμ,iq_{\mu,i} , i=1,2i=1,2Viscous-to-eq. shear log. ratio(-1.5, 0.7)
Table 2: The bounds for the uniform distributions of the physical parameters in the re-parameterized nonlinear viscoelastic constitutive model.
Figure 12: An example of simulated force and image data for learning nonlinear viscoelasticity. This simulated dataset is generated using the experimental setup in Sections 5.1 and 3 , with an order-of-magnitude higher imposed strain. The constitutive parameters are drawn from the prior. Note that the resolution of the image data visualized here is much lower than that of the actual data used in the numerical study; see an image snapshot with high resolution in Figure 17 .
Figure 13: Visualization and analysis of ESFIM-optimized designs for uniaxial testing of nonlinear viscoelastic materials. ( Top ) The designs obtained via ESFIM maximization with batch sizes of 1–3. ( Bottom Left ) The EGA design utility values for random and ESFIM-optimized designs with batch sizes of 1–3. ( Bottom Right ) The expected improvements in the EGA of the optimized designs with batch sizes of 1–3 relative to random designs with batch sizes of 1–3.
Figure 14: The experimental designs with batch sizes 1–3 found via ESFIM maximization for uniaxial testing of nonlinear viscoelastic materials. The designs within the same batch share a geometry, and the design optimization is subject to strain-rate regularization in 24 with three regularization constants λ∈{0.25,1,4}\lambda\in\{0.25,1,4\} .
Figure 15: Visualizations and statistics of the 95%95\% CIs for constitutive parameters of nonlinear viscoelasticity inferred from experiments with random and ESFIM-optimized designs. We consider design optimization without ( λ=0\lambda=0 ) and with ( λ=0.25\lambda=0.25 ) strain-rate regularization. ( Top ) The box plots of the 95% CI sizes. The distributions arise from the prior-based variation in the experimental outcomes. For random designs, the distributions also account for design variations. ( Bottom ) The expected reduction of the 95% CI sizes by optimized designs relative to random designs. The sizes are estimated for θ\theta , which is transformed as in Section 6.1 from the physical parameters used as labels.
Figure 16: The normalized EGA design utility for learning marginal parameters of nonlinear viscoelasticity grouped by material behaviors. We consider design optimization without ( λ=0\lambda=0 ) and with ( λ=0.25\lambda=0.25 ) strain-rate regularization. ( Left ) The bar plots of the utility values of random and ESFIM-optimized designs for learning matrix equilibrium, fiber, viscous amplitude, and viscous kinetics properties. The error bars for the random designs represent the standard deviations of the utility with respect to the design variables. In contrast, the error bars for the optimized designs represent the standard errors of EGA due to finite parameter sample sizes. ( Right ) The expected improvement in the utility of optimized design relative to random designs for learning different properties.
Appendix figures & tables2 assets

Supplementary material from the paper’s appendix.

Appendix

Figure 17: High resolution snapshots of image data. ( Left ) The last snapshot in Figure 4 for uniaxial testing of linear viscoelastic materials. ( Right ) The last snapshot in Figure 12 for uniaxial testing of nonlinear viscoelastic materials.
Figure 18: Randomly sampled designs used for NMCE evaluations.
More in this topic

Bayesian Experimental Design

Bayesian experimental design uses probabilistic models to choose measurements that improve learning or support better decisions.

See all 63 papers

Explore similar work

CardsList
Mar 27, 2026

Hyperelastic constitutive model discovery with differentiable finite elements and structure-preserving neural networks

The discovery of constitutive laws from experimentally accessible measurements is a central problem in nonlinear computational mechanics. Many data-driven constitutive identification approaches rely either on paired strain-stress data or on full-field displacement measurements, both of which are difficult to obtain in realistic three-dimensional settings. We present a differentiable finite element framework for the discovery of hyperelastic material laws from partial observations, including boundary-only displacement measurements and global reaction forces. The method embeds the nonlinear finite element equilibrium problem directly into the learning loop, so that candidate strain-energy densities are assessed through the deformation fields and reactions they induce. This formulation enforces mechanical equilibrium as a constraint and allows the loss function to be evaluated only at observed locations. To ensure physical admissibility and promote numerical solvability throughout training, the constitutive response is represented by Hyperelastic Neural Networks, a structure-preserving neural class that enforces residual energy and stress-free conditions, frame indifference, isotropic material symmetry, polyconvexity, coercivity, and controlled volumetric growth by construction. The resulting PDE-constrained learning problem is solved using a quasi-Newton strategy combined with continuation and solver-aware backtracking. Numerical experiments in two- and three-dimensional finite elasticity demonstrate accurate recovery of hyperelastic isotropic responses from boundary-only data, robustness to measurement noise, and generalization across geometries, loading conditions, and boundary conditions.

Francesco Regazzoni

MOX, Department of Mathematics, Politecnico di Milano, Milan, Italy

Structure-Preserving Neural NetworksHyperelasticityPhysics-Informed MLDifferentiable Physics
AskPDF
Aug 14, 2026

Benchmarking data-driven material models on the classic Treloar dataset

Machine learning is rapidly reshaping constitutive modeling, offers new ways to learn material behavior directly from experimental data, and challenges long-established modeling paradigms. But with a growing number of machine-learning-based approaches available, how do they compare in practice? In this paper, we use the classic experimental data of Treloar to benchmark popular frameworks for hyperelasticity: (Generalized-Invariant) Constitutive Artificial Neural Networks, Physics-Augmented Neural Networks, (Adaptive) Material Fingerprinting, and Efficient Unsupervised Constitutive Law Identification & Discovery. We compare their fitting performance, computational cost, hyperparameter sensitivity, and ease of implementation. Furthermore, we discuss the trade-offs between predictive accuracy and model complexity. The latter is assessed by quantifying both the number of material parameters in the discovered models and the computational time required to evaluate the constitutive model and its derivatives. The results show that all methods can reproduce the benchmark data remarkably well. Rather than identifying a single winner, we highlight the strengths and limitations of each approach and provide practical guidance for their use. The source code for all six methods, including the training and comparison scripts, as well as all results and data used in this study, is publicly available via https://doi.org/10.5281/zenodo.21915635.

Hagen Holthusen, Moritz Flaschel, Denisa Martonová +1

Institute of Applied Mechanics, Egerlandstraße 5, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany · Department of Mechanical Engineering, Stanford University, 440 Escondido Mall, California 94305, United States.

HyperelasticityPhysics-Informed ML
AskPDF
Jan 16, 2026

A Probabilistic Approach to Trajectory-Based Optimal Experimental Design

We present a novel probabilistic approach for optimal experimental path design. In this approach a discrete path optimization problem is defined on a static navigation mesh, and trajectories are modeled as random variables governed by a parametric Markov policy. The discrete path optimization problem is then replaced with an equivalent stochastic optimization problem over the policy parameters, resulting in an optimal probability model that samples estimates of the optimal discrete path. This approach enables exploration of the utility function's distribution tail and treats the utility function of the design as a black box, making it applicable to linear and nonlinear inverse problems and beyond experimental design. Numerical verification and analysis are carried out by using a parameter identification problem widely used in model-based optimal experimental design, namely a two-dimensional time-dependent advection diffusion problem in which the initial condition is the inference target. Experiments use both coarse and fine navigation meshes, with either a single moving sensor or a group of seven coordinated sensors, and the proposed approach is evaluated under D-, A-, and E-optimality criteria.

Ahmed Attia

Mathematics and Computer Science Division, Argonne National Lab, USA

Stochastic OptimizationTrajectory OptimizationBayesian Experimental Design
AskPDF