Gated Graph Attention Networks for Predicting Duration of Large Scale Power Outages Induced by Natural Disasters

Extreme weather events, such as severe storms, hurricanes, snowstorms, and ice storms, which are exacerbated by climate change, frequently cause widespread power outages. These outages halt industrial operations, impact communities, damage critical infrastructure, profoundly disrupt economies, and have far-reaching effects across various sectors. To mitigate these effects, the University of Connecticut and Eversource Energy Center have developed an outage prediction modeling (OPM) system to provide pre-emptive forecasts for electric distribution networks before such weather events occur. However, existing predictive models in the system do not incorporate the spatial effect of extreme weather events. To this end, we develop Spatially Aware Hybrid Graph Neural Networks (SA-HGNN) with contrastive learning to enhance the OPM predictions for extreme weather-induced power outages. Specifically, we first encode spatial relationships of both static features (e.g., land cover, infrastructure) and event-specific dynamic features (e.g., wind speed, precipitation) via Spatially Aware Hybrid Graph Neural Networks (SA-HGNN). Next, we leverage contrastive learning to handle the imbalance problem associated with different types of extreme weather events and generate location-specific embeddings by minimizing intra-event distances between similar locations while maximizing inter-event distances across all locations. Thorough empirical studies in four utility service territories, i.e., Connecticut, Western Massachusetts, Eastern Massachusetts, and New Hampshire, demonstrate that SA-HGNN can achieve state-of-the-art performance for power outage prediction.

Identifying vulnerable transmission lines in power grids before a cascading failure occurs is challenging: existing methods can learn inter-line failure correlations from cascade data, but they are trained and evaluated on a single grid, and transferring the learned knowledge to an unseen grid remains an open problem. We address this by training a single Gated Recurrent Unit (GRU)-gated Graph Attention Network on combined cascading failure data from limited training grids and applying it directly to any unseen grid without retraining. A GRU gate controls what information each node retains or discards at each cascade iteration. Empirical evaluation shows that the model transfers zero-shot to multiple new grids spanning inter-time and inter-domain settings. Using information extracted from the trained model, we consistently identify more vulnerable lines than established structural and electrical baselines.

Solving the alternating current power flow equations in real time is essential for secure grid operation, yet classical Newton-Raphson solvers can be slow under stressed conditions. Existing graph neural networks for power flow are typically trained on a single system and often degrade on different systems. We present PowerModelsGAT-AI, a physics-informed graph attention network that predicts bus voltages and generator injections. The model uses bus-type-aware masking to handle different bus types and balances multiple loss terms, including a power-mismatch penalty, using learned weights. We evaluate the model on 14 benchmark systems (4 to 6,470 buses) and train a unified model on 13 of these under N-2 (two-branch outage) conditions, achieving an average normalized mean absolute error of 0.89% for voltage magnitudes and R^2 > 0.99 for voltage angles. We also show continual learning: when adapting a base model to a new 1,354-bus system, standard fine-tuning causes severe forgetting with error increases exceeding 1000% on base systems, while our experience replay and elastic weight consolidation strategy keeps error increases below 2% and in some cases improves base-system performance. Interpretability analysis shows that learned attention weights correlate with physical branch parameters (susceptance: r = 0.38; thermal limits: r = 0.22), and feature importance analysis supports that the model captures established power flow relationships.