User-Tailored Learning to Forecast Walking Modes for Exosuits

This work presents a wearable human activity recognition (HAR) system that performs real-time inference directly inside a shank-mounted inertial measurement unit (IMU) to support low-latency control of a lower-limb exoskeleton. Unlike conventional approaches that continuously stream raw inertial data to a microcontroller for classification, the proposed system executes activity recognition at the sensor level using the embedded Machine Learning Core (MLC) of the STMicroelectronics LSM6DSV16X IMU, allowing the host microcontroller to remain in a low-power state and read only the recognized activity label from IMU registers. While the system generalizes to multiple human activities, this paper focuses on three representative locomotion modes - stance, level walking, and stair ascent - using data collected from adult participants. A lightweight decision-tree model was configured and deployed for on-sensor execution using ST MEMS Studio, enabling continuous operation without custom machine learning code on the microcontroller. During operation, the IMU asserts an interrupt when motion or a new classification is detected; the microcontroller wakes, reads the MLC output registers, and forwards the inferred mode to the exoskeleton controller. This interrupt-driven, on-sensor inference architecture reduces computation and communication overhead while preserving battery energy and improving robustness in distinguishing level walking from stair ascent for torque-assist control.

A wearable assistive robot must continuously estimate terrain, locomotion mode, gait phase, and walking speed. These quantities are commonly addressed by separate, terrain-specific models, with datasets rarely collected under a common protocol. This paper presents a visuo-inertial framework that connects these estimates through a causal pipeline using a chest-mounted camera and four lower-limb inertial measurement units (IMUs). Anticipatory Terrain Perception (ATP) classifies incoming terrain with 96.3% accuracy and anticipates terrain transitions by 1.46 s on average. Terrain-Aware Locomotion Mode Identification (TALMI) achieves 93.7% and 98.8% accuracy for its level-ground and stairs experts respectively, with mean transition latencies being below 200 ms. The relevant TALMI posterior is retained as a Probabilistic Locomotion Context (PLC) vector and provided to a shared Gait Kinematic Encoder (GKE), which supports 50-Hz bilateral gait-phase estimation and 2-Hz walking-speed estimation. Leave-one-subject-out evaluation yields gait-phase RMSEs of 1.75%, 2.97%, and 4.55% for level walking, stair ascent, and stair descent respectively while estimating speed over 3.5-5.5 km/h with a RMSE of 0.218 km/h. All inertial sensing based models use sensor-fused Euler angles as input rather than raw accelerometer and gyroscope signals, reducing dependence on sensor mounting variation.

Wearable exoskeleton systems hold promise for restoring mobility in individuals with physical impairments, yet most existing controllers rely on static gait policies that lack the ability to adapt to dynamic real-world environments or individual user characteristics. We present \olive (Online Low-rank Incremental Learning for Efficient Adaptive Exoskeletons), a parameter-efficient online adaptation framework that continuously personalizes exoskeleton control during deployment. \olive decomposes the adaptive component of the control policy into a low-rank residual form~$\dW = \At\Bt^\top$ with rank~$r!\ll!\min(d,k)$, reducing online update cost from $\mathcal{O}(dk)$ to $\mathcal{O}(r(d{+}k))$ while preserving the stability of a pretrained base controller~$\Wz$. Parameters are updated via a reward-shaped policy gradient driven purely by on-body sensor feedback (EMG, IMU, vibration), eliminating dependence on offline reference trajectories. A gating mechanism modulates the strength of personalization based on contextual state, and a dynamic rank scheduler adapts the update dimensionality to terrain complexity -- allocating minimal capacity on simple flat terrain and expanding to higher-rank updates on demanding uneven surfaces -- enabling robust performance across diverse activities: flat walking, stair navigation, slopes, and uneven terrain. Experiments on the wearable platform demonstrate that \olive achieves +13, +22, and +15 percentage-point improvements in gait smoothness, effort reduction, and motion stability over the strongest baseline, converging within $\sim$1{,}800 walking steps at 7.4,ms end-to-end latency. Our code implementation is available at https://github.com/FastLM/OLIVE.