EAAE: Energy-Aware Autonomous Exploration for UAVs in Unknown 3D Environments
Authors: Jacob Elskamp, Moji Shi, Leonard Bauersfeld, Davide Scaramuzza, Marija Popović
Abstract
Battery-powered multirotor unmanned aerial vehicles (UAVs) can rapidly map unknown environments, but mission performance is often limited by energy rather than geometry alone. Standard exploration policies that optimise for coverage or time can therefore waste energy through manoeuvre-heavy trajectories. In this paper, we address energy-aware autonomous 3D exploration for multirotor UAVs in initially unknown environments. We propose Energy-Aware Autonomous Exploration (EAAE), a modular frontier-based framework that makes energy an explicit decision variable during frontier selection. EAAE clusters frontiers into view-consistent regions, plans dynamically feasible candidate trajectories to the most informative clusters, and predicts their execution energy using an offline power estimation loop. The next target is then selected by minimising predicted trajectory energy while preserving exploration progress through a dual-layer planning architecture for safe execution. We evaluate EAAE in a full exploration pipeline with a rotor-speed-based power model across simulated 3D environments of increasing complexity. Compared to representative distance-based and information gain-based frontier baselines, EAAE consistently reduces total energy consumption while maintaining competitive exploration time and comparable map quality, providing a practical drop-in energy-aware layer for frontier exploration.
This paper presents a battery-aware predictive trajectory-planning and control framework for multirotors operating under spatially localized disturbances. Candidate trajectories are evaluated through closed-loop vehicle--motor--battery propagation, allowing disturbance-induced control demand, electrical energy, battery evolution, and terminal-voltage-dependent actuator capability to enter the planning process. % A reduced-order battery model is numerically benchmarked against an independently implemented Simscape equivalent-circuit reference, with a power NRMSE of 0.64% and a cumulative-energy discrepancy below 0.7%. % In a 150-s, 640-m mission containing three disturbance regions, the selected trajectory reduces electrical energy consumption by 7.46% and position-tracking RMSE by approximately 72% relative to the disturbance-aware fixed-reference baseline. % Planner ablations show that battery-dependent terms are nonbinding at nominal SOC but alter the selected trajectory under a depleted-battery stress condition. % Execution with multiple feedback controllers further demonstrates that controller selection changes the tradeoff among tracking accuracy, energy consumption, and actuator utilization. % The results demonstrate the benefit of accounting for predicted closed-loop energetic and battery--actuator consequences during trajectory selection.
Autonomous exploration in unknown environments requires unmanned aerial vehicles (UAVs) to efficiently generate informative trajectories while simultaneously constructing accurate maps. Although many existing exploration methods rely on geometric information, they often lack semantic awareness, resulting in suboptimal exploration efficiency and limited environmental understanding. To address this limitation, this paper proposes a semantic-aware exploration framework that adds semantic information to a roadmap-based exploration strategy. The proposed method builds on the Dynamic Exploration Planner (DEP), which incrementally constructs a Probabilistic Roadmap (PRM), and augments this roadmap with a semantic layer. A semantic reward function is introduced to prioritize regions containing meaningful objects and structures, enabling the UAV to focus on areas with higher information value. Furthermore, the roadmap is continuously updated to support efficient frontier selection and path planning during exploration. The proposed framework is implemented in ROS Noetic and Gazebo using an RGB-D sensor for simultaneous acquisition of geometric and semantic information. Experimental results in multiple simulated environments demonstrate that the proposed approach achieves exploration coverage rates between 90% and 94% while reducing exploration time and travel distance compared with conventional geometry-based exploration methods.
Autonomous exploration is critical for robot mapping unknown environments. Desirable characteristics of exploration algorithms include compute efficiency and small traversed distance during the exploration process. Motivated by these, we present Omnidirectional Path-efficient Aerial 3D expLoration (OPAL), an exploration framework centered on deliberate 360-degree yaw rotation at ambiguous branch points rather than compute-heavy global tour planning. We devise multiple variants of OPAL to determine the frontier-selection strategy once the yaw pan is completed. One variant is model-free, while others use large language models (LLMs) or vision-language models (VLMs). We characterize the performance of these variants while varying the vicinity search radius to include frontiers in the selection process. Through simulations we find that although the time-consuming in-place yaw rotation increases total exploration time relative to more computationally complex baselines such as EDEN and FALCON, OPAL is computationally simpler and achieves shorter travel distances and higher coverage-versus-distance area under the curve. We also show that adjusting the frontier-selection search radius enables a tradeoff between travel distance and total exploration time. We verify our results on a Modal AI drone in two indoor environments by comparing OPAL against FALCON, and find that the traveled distance for a variant of OPAL to be as much as 25% lower than FALCON.