Ground Reaction Inertial Poser: Physics-based Human Motion Capture from Sparse IMUs and Insole Pressure Sensors

Humanoid motion imitation requires not only accurate perception of human kinematics but also faithful reproduction of physical interactions with the environment. However, existing pipelines rely primarily on vision-based motion capture and kinematic imitation, largely ignoring contact dynamics, leading to artifacts such as foot sliding, floor penetration, and unstable behaviors. In this work, we revisit humanoid motion imitation from the perspective of physical grounding and leverage pressure as a unified modality across perception and control. We present PressMimic, a framework that integrates pressure into the full pipeline from motion capture to humanoid control. In the perception stage, we introduce FRAPPE++, a multimodal model that fuses RGB and pressure to jointly estimate 3D pose and global motion, where pressure provides explicit contact and support constraints to resolve ambiguity in vision-based estimation. In the control stage, we propose a pressure-supervised policy (PSP) that incorporates pressure-derived signals into reinforcement learning, enabling physically consistent contact patterns during execution. We further construct MotionPRO, a large-scale dataset with synchronized RGB, pressure, and motion capture data. Experiments show that pressure improves motion estimation accuracy, trajectory consistency, and execution stability. These results demonstrate that pressure serves as an effective physical grounding signal, bridging perception and control for physically consistent humanoid motion imitation.

Capturing full-body human motion with object interactions is crucial for AR/VR and robotics applications, yet it remains challenging for conventional vision-based methods due to occlusions and constrained capture volumes. Inertial measurement units (IMUs) offer a compelling alternative without line-of-sight requirements, but existing IMU-based motion capture assumes an isolated human and ignores object contacts and dynamics. To bridge this gap, we present IMU-HOI, a novel framework that jointly recovers full-body human pose and 6-DoF object trajectory from sparse IMUs on the body and object, explicitly modeling human-object interaction. Our approach first infers probabilistic hand-object contacts directly from IMU streams and uses them as a high-level signal to route between kinematic and inertial reasoning. These contact cues drive a three-stage fusion pipeline that refines human pose and root translation, and fuses hand-based forward kinematics with object-IMU integration for object motion, yielding coherent, drift-resilient trajectories for both human and object. Experiments on challenging human-object interaction scenarios demonstrate substantial accuracy gains over prior inertial motion capture methods. Moreover, IMU-HOI can be plugged into existing sparse-IMU mocap backbones with minimal changes, effectively extending the scope of purely inertial motion capture from isolated humans to full human-object interaction and joint motion estimation.

Recent advancements in visual-inertial motion capture systems have demonstrated the potential of combining monocular cameras with sparse inertial measurement units (IMUs) as cost-effective solutions, which effectively mitigate occlusion and drift issues inherent in single-modality systems. However, they are still limited by metric inaccuracies in global translations stemming from monocular depth ambiguity, and shape-agnostic local motion estimations that ignore anthropometric variations. We present Stereo-Inertial Poser, a real-time motion capture system that leverages a single stereo camera and six IMUs to estimate metric-accurate and shape-aware 3D human motion. By replacing the monocular RGB with stereo vision, our system resolves depth ambiguity through calibrated baseline geometry, enabling direct 3D keypoint extraction and body shape parameter estimation. IMU data and visual cues are fused for predicting drift-compensated joint positions and root movements, while a novel shape-aware fusion module dynamically harmonizes anthropometry variations with global translations. Our end-to-end pipeline achieves over 200 FPS without optimization-based post-processing, enabling real-time deployment. Quantitative evaluations across various datasets demonstrate state-of-the-art performance. Qualitative results show our method produces drift-free global translation under a long recording time and reduces foot-skating effects.