An FPGA-Based SoC Architecture with a RISC-V Controller for Energy-Efficient Temporal-Coding Spiking Neural Networks

Spiking Neural Networks (SNNs) have gained significant attention in edge computing due to their low power consumption and computational efficiency. However, existing implementations either use conventional System on Chip (SoC) architectures that suffer from memory-processor bottlenecks, or large-scale neuromorphic hardware that is inefficient and wasteful for small-scale SNN applications. This work presents SNAP-V, a RISC-V-based neuromorphic SoC with two accelerator variants: Cerebra-S (bus-based) and Cerebra-H (Network-on-Chip (NoC)-based) which are optimized for small-scale SNN inference, integrating a RISC-V core for management tasks, with both accelerators featuring parallel processing nodes and distributed memory. Experimental results show close agreement between software and hardware inference, with an average accuracy deviation of 2.62% across multiple network configurations, and an average synaptic energy of 1.05 pJ per synaptic operation (SOP) in 45 nm CMOS technology. These results show that the proposed solution enables accurate, energy-efficient SNN inference suitable for real-time edge applications.

Spiking Neural Networks (SNNs) offer a biologically inspired foundation for low-power, event-driven intelligence, yet their direct on-chip supervised training remains a key hardware challenge. This paper presents a multiplication-free, spike-time-based learning algorithm specifically designed for efficient FPGA realization. The proposed approach eliminates floating-point arithmetic and explicit gradient storage, enabling a fully event-driven, digital training pipeline. Implemented on a Xilinx Artix-7 FPGA, the architecture achieves high operating speed and minimal resource usage while maintaining competitive accuracy. These results demonstrate that the learning algorithm effectively maps onto reconfigurable hardware, achieving both computational and energy efficiency. Software simulations further validate scalability, with 96.5% and 84.8% accuracy on MNIST and Fashion-MNIST. With its spike-driven and multiplier-free operation, the proposed framework delivers a practical and scalable hardware solution for real-time, on-chip SNN learning in edge environments.

Spiking Neural Networks (SNNs) offer a promising solution for energy-efficient edge intelligence; however, their hardware deployment is constrained by memory overhead, inefficient scaling operations, and limited parallelism. This work proposes L-SPINE, a low-precision SIMD-enabled spiking neural compute engine for efficient edge inference. The architecture features a unified multi-precision datapath supporting 2-bit, 4-bit, and 8-bit operations, leveraging a multiplier-less shift-add model for neuron dynamics and synaptic accumulation. Implemented on an AMD VC707 FPGA, the proposed neuron requires only 459 LUTs and 408 FFs, achieving a critical delay of 0.39 ns and 4.2 mW power. At the system level, L-SPINE achieves 46.37K LUTs, 30.4K FFs, 2.38 ms latency, and 0.54 W power. Compared to CPU and GPU platforms, it reduces inference latency from seconds to milliseconds, achieving an up to three orders-of-magnitude improvement in energy efficiency. Quantisation analysis shows that INT2/INT4 configurations significantly reduce memory footprint with minimal accuracy loss. These results establish L-SPINE as a scalable and efficient solution for real-time edge SNN deployment.