4DRaL: Bridging 4D Radar with LiDAR for Place Recognition using Knowledge Distillation

All-weather autonomy is critical for autonomous driving, which necessitates reliable localization across diverse scenarios. While LiDAR place recognition is widely deployed for this task, its performance degrades in adverse weather. Conversely, radar-based methods, though weather-resilient, are hindered by the general unavailability of radar maps. To bridge this gap, radar-to-LiDAR place recognition, which localizes radar scans within existing LiDAR maps, has garnered increasing interest. However, extracting discriminative and generalizable features shared between modalities remains challenging, compounded by the scarcity of large-scale paired training data and the signal heterogeneity across radar types. In this work, we propose RLPR, a robust radar-to-LiDAR place recognition framework compatible with single-chip, scanning, and 4D radars. We first design a dual-stream network to extract structural features that abstract away from sensor-specific signal properties (e.g., Doppler or RCS). Subsequently, motivated by our task-specific asymmetry observation between radar and LiDAR, we introduce a two-stage asymmetric cross-modal alignment (TACMA) strategy, which leverages the pre-trained radar branch as a discriminative anchor to guide the alignment process. Experiments on four datasets demonstrate that RLPR achieves state-of-the-art recognition accuracy with strong zero-shot generalization capabilities.

Scalable, all-weather place recognition increasingly relies on heterogeneous radar place recognition to bridge diverse hardware platforms. A notable application is matching queries from cost-effective 4D automotive radars against high-fidelity reference maps built by dense spinning radars. This process is fundamentally limited by the extreme sparsity (and narrow field-of-view) of the 4D sensor, which captures only a fraction of the structural density present in the spinning radar database. Prior efforts address this issue by unifying different radar signals. That is, projecting both signals into a common representational space. Yet, they suffer performance degradation in multi-session environments. In this paper, we propose spatially-stratified distillation (SSD); a strategy that replaces standard uniform distillation with an asymmetric spatial alignment derived directly from physical radar returns. In regions where both radars exhibit overlapping returns, SSD enforces strong feature alignment. Crucially, in sparse regions where the 4D student lacks returns but the teacher contains valid structure within the shared field of view, SSD applies heavily discounted distillation weights. Extensive evaluations of the recent HeRCULES dataset demonstrate that SSD significantly outperforms prior place recognition methods, achieving state-of-the-art results on its challenging dynamic sequences.

4D millimeter wave radars (4D radars) are new emerging sensors that provide point clouds of objects with both position and radial velocity measurements. Compared to LiDARs, they are more affordable and reliable sensors for robots' perception under extreme weather conditions. On the other hand, point cloud registration is an essential perception module that provides robot's pose feedback information in applications such as Simultaneous Localization and Mapping (SLAM). Nevertheless, the 4D radar point clouds are sparse and noisy compared to those of LiDAR, and hence we shall confront great challenges in registering the radar point clouds. To address this issue, we propose a point cloud registration framework for 4D radars based on Generalized Method of Moments. The method does not require explicit point-to-point correspondences between the source and target point clouds, which is difficult to compute for sparse 4D radar point clouds. Moreover, we show the consistency of the proposed method. Experiments on both synthetic and real-world datasets show that our approach achieves higher accuracy and robustness than benchmarks, and the accuracy is even comparable to LiDAR-based frameworks.