Simulator Adaptation for Sim-to-Real Learning of Legged Locomotion via Proprioceptive Distribution Matching

Learning-based approaches to locomotion have risen in popularity in recent years, showing the capability for complex legged locomotion and whole-body control. Reinforcement learning (RL), the primary learning-based approach for locomotion, often utilizes a high-performance simulation tool, providing a controlled and efficient training and development environment. However, policies that perform well in simulation frequently encounter unexpected challenges when deployed on a physical system, known as the sim-to-real gap. This work presents a robust RL locomotion framework capable of whole-body control. The proposed RL framework utilizes Nvidia's new set of simulation tools, Isaac Sim, and its companion RL framework, Isaac Lab, for training, achieving a zero-shot sim-to-real policy. The performance of our policy is validated on physical hardware using the Unitree Go1, with experimental results showing similar velocity tracking performance to the quadruped's integrated controller, with a greater ability to recover from large disturbances, and achieve linear velocities of 2.0 m/s and angular velocities of 1.8 rad/s.

Achieving quadruped robot locomotion across diverse and dynamic terrains presents significant challenges, primarily due to the discrepancies between simulation environments and real-world conditions. Traditional sim-to-real transfer methods often rely on manual feature design or costly real-world fine-tuning. To address these limitations, this paper proposes the DreamTIP framework, which incorporates Task-Invariant Properties learning within the Dreamer world model architecture to enhance sim-to-real transfer capabilities. Guided by large language models, DreamTIP identifies and leverages Task-Invariant Properties, such as contact stability and terrain clearance, which exhibit robustness to dynamic variations and strong transferability across tasks. These properties are integrated into the world model as auxiliary prediction targets, enabling the policy to learn representations that are insensitive to underlying dynamic changes. Furthermore, an efficient adaptation strategy is designed, employing a mixed replay buffer and regularization constraints to rapidly calibrate to real-world dynamics while effectively mitigating representation collapse and catastrophic forgetting. Extensive experiments on complex terrains, including Stair, Climb, Tilt, and Crawl, demonstrate that DreamTIP significantly outperforms state-of-the-art baselines in both simulated and real-world environments. Our method achieves an average performance improvement of 28.1% across eight distinct simulated transfer tasks. In the real-world Climb task, the baseline method achieved only a 10\ success rate, whereas our method attained a 100% success rate. These results indicate that incorporating Task-Invariant Properties into Dreamer learning offers a novel solution for achieving robust and transferable robot locomotion.

Humans expand their locomotion capability by wearing appropriate footwear, such as hiking boots for mountains or skates for ice. Footwear changes the ground-contact interface and enables traversal of otherwise difficult terrain. In contrast, locomotion controllers are typically trained for a fixed morphology, and their performance can degrade when shoes alter foot geometry, mass, and friction. We propose SHOES, a sample-efficient framework for adapting locomotion policies to footwear-induced morphology changes. SHOES freezes a simulation-trained nominal policy and fine-tunes only lightweight, identity-initialized modulation modules on the robot, preserving the initial behavior while enabling efficient hardware adaptation. We also introduce SafeBox, a workspace-aware waypoint sampler that constrains online adaptation within a user-defined workspace. The simulation results with a shoe-equipped Unitree Go2 show that SHOES substantially recovers locomotion performance after footwear-induced morphology changes using limited additional adaptation. Under the same adaptation budget, SHOES outperforms FiLM-only, Linear Adapter-only, and residual-RL baselines. Real-world experiments on a Unitree Go2 fitted with human shoes further evaluate the effectiveness of SHOES for hardware deployment.