A Compact Peristaltic Pump Based on Magneto-Elastic Hysteresis with Single Pneumatic Control

Scalable control of pneumatic and fluidic networks remains fundamentally constrained by architectures that require continuous power input, dense external control hardware, and fixed routing topologies. Current valve arrays rely on such continuous actuation and mechanically fixed routing, imposing substantial thermal and architectural overhead. Here, we introduce the Switchable-polarity Electropermanent Magnet (S-EPM), a bistable magnetic architecture that spatially redistributes its external magnetic field through transient electrical excitation. By reconfiguring internal flux pathways within a composite magnet assembly, the S-EPM exchanges reinforced and weakened magnetic-field regions while maintaining bistable, zero-power state retention. We integrate this architecture into a compact pinch-valve to robustly control pneumatic and liquid media. This state-encoded magnetic control enables programmable fluidic networks, including decoders, hierarchical distribution modules, and a nonvolatile six-port routing array. By embedding functionality in persistent magnetic states rather than continuous power or static plumbing, this work establishes a scalable foundation for programmable fluidics and self-driving laboratories.

Soft pneumatic actuators are widely used in soft robotics because they can produce large motions while remaining compliant enough to interact safely with objects, environments, and the human body. However, their performance is not solely determined by pressure. Instead, the response depends on the way the actuator is built, including the shape of its chambers, the placement of reinforcements, the use of folds, material stiffness, and the constraints that guide its deformation. As the literature has expanded, it has become more difficult to determine which mechanism is most suitable for a given application and which reported results can be compared across studies. This review examines soft pneumatic actuators according to the design strategies used to generate four motion classes: linear, bending, twisting, and omnidirectional actuation. For each class, it analyzes the structural features that define the deformation path, including braid angle, fold geometry, fiber orientation, chamber arrangement, structural asymmetry, and internal constraint layers. It then discusses how the design choice affect motion output, force generation, air demand, repeatability, durability, fabrication difficulty, and robotic integration. The review further identifies key conditions that must be considered when selecting or comparing actuators, including pressure, loading condition, actuator size, pneumatic supply, and hysteresis This approach helps explain why actuators with similar motion outputs may differ substantially in design requirements, pneumatic demand, and practical suitability. It also highlights the design priorities needed for compact, efficient, repeatable, and deployable soft pneumatic systems in wearable, biomedical, and mobile robotic applications.

The capability to encode spatially distinct magnetization patterns within soft materials enables remote control over complex deformations. This characteristic is especially important for microfluidic platforms, where limited dynamic control of channel boundaries and laminar flow conditions usually restrict fluid transport and interactions. The present study introduces a shape-programmable magnetic soft membrane actuator as an active microchannel component that can dynamically modulate its shape under magnetic fields and therefore the microfluidic environment. The membrane is magnetically programmed using a template-based approach, which allows it to be controllably deformed in the form of a sinusoid under the influence of an external magnetic field. The membrane's integration into a microchannel converts a passive channel wall into a dynamically changeable interface, allowing active fluid manipulation and enhancing micromixing in laminar flow conditions. The proposed approach establishes a versatile platform for wirelessly controlled deformable interfaces in next-generation microfluidic and lab-on-chip systems.