Reference-Augmented Learning for Precise Tracking Policy of Tendon-Driven Continuum Robots

Tendon-Driven Continuum Robots (TDCRs) pose significant modeling and control challenges due to complex nonlinearities, such as frictional hysteresis and transmission compliance. This paper proposes a differentiable learning framework that integrates high-fidelity dynamics modeling with robust neural control. We develop a GRU-based dynamics model featuring bidirectional multi-channel connectivity and residual prediction to effectively suppress compounding errors during long-horizon auto-regressive prediction. By treating this model as a gradient bridge, an end-to-end neural control policy is optimized through backpropagation, allowing it to implicitly internalize compensation for intricate nonlinearities. Experimental validation on a physical three-section TDCR demonstrates that our framework achieves accurate tracking and superior robustness against unseen payloads, outperforming Jacobian-based methods by eliminating self-excited oscillations. For implementation details and source code, please refer to https://github.com/ZiqingZou/ContinuumControl.

Predicting the shape of tendon driven continuum robots (TDCRs) at steady state from actuation remains challenging due to continuous deformation, complex tendon routing, compliance, friction, and fabrication variability. In this paper, we address this problem as kinematic self modeling conditioned on action. We present a lightweight 3D printed TDCR hardware platform and an RGB-D data collection pipeline with multiple cameras, and we learn a point cloud flow matching model that maps motor actuation states to the robot's settled 3D geometry. The model is trained from randomly sampled quasi static configurations and evaluated on test motor commands within the same TDCR design family and actuation range. We compare against prior 3D deformable object and robot self modeling approaches in both MuJoCo simulation and real hardware experiments. Experiments on simulated 2-, 3-, and 5-module TDCRs and real 2- and 3-module robots show improved shape prediction accuracy under CD and EMD metrics. We further show in simulation that the same conditional formulation generalizes to tip payload as a conditioning input, enabling payload conditioned steady-state shape prediction. These results demonstrate a data driven self modeling framework for quasi static TDCR geometry prediction.

Most robotic systems rely on fixed-frequency discrete-time controllers, creating a trade-off between the efficiency of low-frequency control and the responsiveness of high-frequency feedback. As a result, systems typically default to high control rates for robustness, at the cost of wasted inference and unnecessary actuation. Addressing this, we introduce Time-Adaptive Robotic Control (TARC), a reinforcement learning framework in which the policy jointly predicts a control action and its duration of application. TARC learns temporally extended actions by optimizing task performance under soft or hard constraints on the number of control switches, enabling adaptive modulation of control rates. We evaluate TARC on two robotic hardware platforms: a high-speed RC car and the Unitree Go1 quadruped, and on a vision-language action model in simulation, where each query incurs a costly transformer forward pass. Across all settings, TARC matches the performance of high-frequency discrete-time controllers while operating at less than half their control frequency. Unlike fixed-rate controllers, TARC adapts its control frequency online, allocating high-frequency feedback only when required.