We present a dual-barrier control barrier function (CBF) safety filter for real-time, safety-critical velocity control of holonomic robots operating in incrementally built occupancy grid maps. As a robot explores an unknown environment, unmapped regions introduce irreducible uncertainty, since obstacle geometry beyond the explored frontier is unknown, making entry into such regions a source of collision risk, especially with front-facing sensors. To address this, we enforce two constraints: avoidance of mapped obstacles and restriction from unexplored regions. Both constraints are derived analytically from the occupancy grid's signed distance field, yielding a closed-form safety filter that requires only a small linear system solve per cycle. On resource-constrained platforms such as the Raspberry Pi, where SLAM and planning already consume significant compute, the low overhead of the proposed filter preserves resources. An adaptive gain schedule relaxes the frontier constraint in information-rich regions and tightens it in well-mapped areas, improving exploration efficiency while maintaining safety. The filter operates in velocity space as a minimally invasive correction and composes with arbitrary nominal controllers, including learning-based methods. Hardware flight experiments on a PX4-controlled quadrotor demonstrate zero collisions across multiple indoor runs.
Safe control in unknown environments is a key challenge in mobile robotics. Control Barrier Functions (CBFs) provide a principled framework for guaranteeing safety constraint satisfaction. State-of-the-art CBF approaches assume either known environments with predefined obstacles, or rely only on obstacles currently within the robot's Field of View (FoV). However, practical robots in a priori unknown environments can observe their surroundings only partially, and therefore can violate safety due to limited FoV, sensor range, or occlusion. This paper incorporates the memory of previously observed obstacles of arbitrary shape that have left the robot's FoV into CBF-based safe control. In particular, we couple the Signed Distance Function (SDF)-based CBF formulation to an occupancy grid map built online during the system's operation. Furthermore, the lack of steering authority induced by the SDF gradient degeneracy when facing obstacles head-on is addressed by constructing a Gaussian pyramid of the SDF, yielding a multi-level CBF. The efficacy of the proposed approach is evaluated against memory unaware baselines in the CARLA simulator. Moreover, we demonstrate the generalizability of the proposed approach in real deployments on a small warehouse robot and a large, articulated frame steering autonomous wheel loader.
Golnaz Raja, Miloš Prágr, Topi Reino Johannes Kärki +2
Safe navigation of autonomous robots remains one of the core challenges in the field, especially in dynamic and uncertain environments. One prevalent approach is safety filtering based on control barrier functions (CBFs), which are easy to deploy but difficult to design. Motivated by the shortcomings of existing learning- and model-based methods, we propose a simple yet effective neural CBF design method for safe robot navigation in dynamic environments. We employ the idea of a composite CBF, where multiple neural CBFs are combined into a single CBF. Individual CBFs are trained using data generated offline via the Hamilton-Jacobi reachability framework to approximate the optimal safe set for single moving obstacles. Additionally, we use a residual neural architecture, ensuring that the estimated safe set does not intersect with the corresponding failure set. The method is extensively evaluated in simulation experiments for a ground robot and a quadrotor, comparing it against several baseline methods. The proposed method improves success rates by up to 18% over the strongest baseline, while maintaining comparable or lower path lengths and motion times. The method is also demonstrated in hardware experiments for both types of robots.
This paper presents a general end-to-end framework for constructing robust and reliable layered safety filters that can be leveraged to perform dynamic collision avoidance over a broad range of applications using only local perception data. Given a robot-centric point cloud, we begin by constructing an occupancy map which is used to synthesize a Poisson safety function (PSF). The resultant PSF is employed as a control barrier function (CBF) within two distinct safety filtering stages. In the first stage, we propose a predictive safety filter to compute optimal safe trajectories based on nominal potentially-unsafe commands. The resultant short-term plans are constrained to satisfy the CBF condition along a finite prediction horizon. In the second stage, instantaneous velocity commands are further refined by a real-time CBF-based safety filter and tracked by the full-order low-level robot controller. Assuming accurate tracking of velocity commands, we obtain formal guarantees of safety for the full-order system. We validate the optimality and robustness of our multistage architecture, in comparison to traditional single-stage safety filters, via a detailed Pareto analysis. We further demonstrate the effectiveness and generality of our collision avoidance methodology on multiple legged robot platforms across a variety of real-world dynamic scenarios.