AirBender: Adaptive Transportation of Bendable Objects Using Dual UAVs

Aerial manipulators represent the forefront of aerial robotics. Although potentially capable of complex interaction tasks, controlling aerial manipulators throughout the dynamic transitions occurring during task execution presents significant challenges. Abrupt or discontinuous changes in system dynamics generated by the transitions suggest the use of a switched approach, yet the available aerial manipulation methods are not designed for coping with switched regimes. In addition, most available methods fall short in coping with the tight couplings between the aerial vehicle and the manipulator, as well as in coping with the state-dependent uncertainties arising from the difficulty in modeling such couplings. We propose a switched-based adaptive control framework for aerial manipulators not relying on a priori knowledge of the vehicle-manipulator couplings and of state-dependent uncertainties. To guarantee stable manipulation despite changes in system dynamics, the framework provides a class of switching signals characterizing those transition phases for which the system is guaranteed to remain stable. Comparative experiments further validate the effectiveness of the proposed switched-based framework over the state of the art.

In recent years, aerial manipulation has attracted increasing attention as a key to expand the application of aerial robots. In this work, we focus on two major research directions for achieving versatile aerial manipulation: (i) acquiring high environmental adaptability using soft manipulators, and (ii) expanding the feasible wrench space by distributing thrusters along the manipulator. However, no aerial robot has simultaneously satisfied these two requirements. Therefore, in this paper, we propose a morphing rotor-distributed aerial robot with flexible continuum links that achieves both high shape adaptability and an expanded wrench space. The flexible continuum links function as soft manipulators, passively conforming to the shape of the environment, while the thrusters distributed along the continuum links expand the feasible thrust wrench space and enable the end-effector to exert large interaction forces. To realize the proposed robot, it is essential to suppress vibrations of the lightweight continuum links. Thus, we develop a composite leaf-spring structure that provides both high torsional and vertical stiffness, and vibration-suppressing control methods. Using these implementations, we demonstrate stable flight and a variety of aerial manipulation tasks. To the best of our knowledge, this is the first work to realize aerial manipulations using flexible links with an integrated thruster.

The collaboration between humans and robots is critical in many robotic applications, especially in those requiring physical human-robot interaction (pHRI). Previous research in pHRI has largely focused on robotic manipulators, employing impedance or admittance control to maintain operational safety. Conversely, research in human-quadrotor cooperative load transportation (CLT) is still in its infancy. This letter introduces a novel admittance controller designed for safe and effective human-quadrotor CLT using a quadrotor equipped with an actively-controlled winch. The proposed method accounts for the system's coupled dynamics, allowing the quadrotor and its cable to dynamically adapt to contact forces during CLT tasks, thereby enhancing responsiveness. We experimentally validated the task-adaptive capability of the controller across the entire CLT process, including in-place loading/unloading and load transporting tasks. To this end, we compared the system performances against a conventional approach, using both variable and fixed cable lengths under low- and high-stiffness conditions. Results demonstrate that the proposed method outperforms the conventional approach in terms of system responsiveness and motion smoothness, leading to improved CLT capabilities.