Sensitivity-Based Robust NMPC for Close-Proximity Offshore Wind Turbine Inspection with a Tilted Multirotor

This paper presents a new robust integrated planning and control (IPC) strategy for multirotor uncrewed aerial vehicles. We propose a nonlinear model predictive control (NMPC) formulation that embeds control barrier functions (CBFs) as exponential penalties, improving feasibility while ensuring smooth obstacle avoidance under tight input bounds. The penalty weights provide a practical tuning knob to trade off tracking accuracy against avoidance aggressiveness. We enhance the system robustness by employing a high-gain disturbance observer (HGDO) to estimate and compensate for external disturbances. We also incorporate a Kalman filter (KF) for computationally efficient, real-time prediction of obstacle motion, enabling avoidance of moving obstacles. Comparative studies against both conventional NMPC and NMPC with hard CBF constraints, validated in Gazebo and hardware experiments, demonstrate superior feasibility, safety, and robustness. To the best of our knowledge, this is the first hardware-validated NMPC-CBF IPC framework, offering a practical step toward safe quadrotor deployment in dynamic environments.

This paper presents a sensitivity-based tube Nonlinear Model Predictive Control (NMPC) framework for cooperative aerial chains under bounded parametric uncertainty. We consider a planar two-vehicle chain connected by rigid links, modeled with input-rate actuation to enforce slew-rate and magnitude limits on thrust and torque. Robustness to uncertainty in link mass, length, and inertia is achieved by propagating first-order parametric state sensitivities along the horizon and using them to compute online constraint-tightening margins. We robustify an inter-link separation constraint, implemented via a smooth cosine embedding, and thrust-magnitude bounds. The method is implemented in MATLAB and evaluated with boundary-hugging maneuvers and Monte-Carlo uncertainty sampling. Results show improved constraint margins under uncertainty with tracking performance comparable to nominal NMPC.

Small multirotor aircraft are increasingly tasked with operations in the atmospheric boundary layer, where turbulent winds comparable to the vehicle's airspeed degrade trajectory tracking and can defeat conventional feedback control. This work illustrates a two-stage learning pipeline that first estimates the local wind from onboard kinematics and dynamics and then exploits that estimate inside a reinforcement learning (RL) flight controller. The wind estimator, an attention-augmented gated recurrent network trained on thousands of simulated flights through von Karman turbulence with power-law shear and veer, recovers the horizontal wind vector with a per-flight root-mean-square error of 0.40 m/s and a direction error of 3.2 degrees on unseen wind regimes, an accuracy near the floor imposed by unresolved turbulence, and generalizes to vertical ascent profiles with a skill score of 0.861 over a constant-wind reference. A proximal policy optimization controller receiving the frozen estimator's output reduces horizontal trajectory tracking error by 48% relative to a wind-blind proportional-derivative baseline across mean winds of 4 m/s to 12 m/s, winning on 100% of evaluation episodes. A three-way ablation decomposes this improvement into a kinematic component, available without wind information, and a wind-perception component; the perception share rises with wind speed, from small in light winds toward roughly half the total benefit in strong winds, consistent with the quadratic scaling of aerodynamic drag. The controller degrades gracefully on out-of-distribution winds of 13 m/s to 15 m/s, where the baseline fails catastrophically.