Information Density as a Quantitative Measure for AI-enabled Virtual Sensing: Feasibility and Limits

In wireless sensor networks (WSNs), data augmentation is a novel method to improve sampling-frequency decision performance, thereby enabling energy optimization for IoT (Internet of Things) sensors. However, existing methods rely on a single generator and empirically determined quantities, failing to establish a mapping between dynamic information gaps and multiple generators, and overlooking the heterogeneity of generated samples. Moreover, an evaluation and a closed-loop method that jointly considers the information gap and the model performance are lacking. To address these issues, we propose an information gap-guided IoT sensor automatic data augmentation framework (IGADA-IoT) with hierarchical multi-generator collaboration and scheduling over multiple rounds. Capabilities of different generators are jointly utilized to reduce the information gaps. In the IGADA-IoT, a hierarchical multi-generator collaboration and scheduling strategy (HMGCS) is proposed to enhance the targetedness and rationality of generated sample allocation. An information gap-model performance joint evaluation and closed-loop method (IGMP-EC) is proposed to enhance the accuracy of augmentation decisions, and to mitigate the risks of under-augmentation and over-augmentation. Experimental results show that the IGADA-IoT improves the average accuracy of multiple downstream models by 7.27%. Compared with advanced data augmentation methods, the average accuracy is improved by 8.67%. Compared with the individual generators, the average accuracy is improved by 7.24%. Furthermore, public IoT sensor datasets from the UCR Archive and real-world deployments demonstrate the accuracy and generalizability of the proposed method.

Virtual sensing, the estimation of hard-to-measure quantities from available sensor measurements, is a critical enabler for control and monitoring in cyber-physical systems. However, when sensors fail, learning-based predictors can produce physically implausible estimates that propagate to system-level failures. We argue that real-world deployment demands robustness and introduce MuViS-C, the first multi-domain benchmark of robustness against common sensor failures in learning-based virtual sensing. Building on an existing nominal-performance benchmark and established corruption taxonomies, it covers ten sensor failure modes, from subtle drifts to catastrophic signal dropouts, at multiple severities. These are paired with complementary robustness measures capturing average error under corruption, relative degradation, and worst-case fragility. Across nine datasets from six domains, we benchmark six architectures spanning gradient-boosted trees and the major inductive biases for sequence modeling: convolution, recurrence, attention, and MLP-mixing. On the attention-based architecture, we further probe three robustification strategies. We find that (i) every model degrades substantially under corruption, becoming worse than a naïve predictor on at least one corruption setting, (ii) gradient-boosted tree ensembles achieve strong robustness, and (iii) dedicated robustification closes the gap between the attention-based architecture and the most robust models, though each strategy hurts nominal performance. The benchmark's multi-domain design proves essential, as model rankings shift across datasets, and no single domain captures the full robustness picture. MuViS-C is open-source and extensible to new datasets, failure modes, measures, and models.

Autonomous systems and smart-industry deployments increasingly split computation across near-sensor, edge, and cloud resources, where tight energy, latency, and reliability budgets demand run-time adaptivity. In practice, deciding what to compute and transmit at each point is pivotal; yet as multimodal sensor suites (cameras, LiDAR/depth, etc.) proliferate at the edge, most prior approaches either (i) fuse modalities on powerful servers or (ii) apply uni-modal near-sensor filters that ignore cross-modal dependencies, leading to redundant transmissions or missed events. We present FusionSense, a fusion-aware intelligent sensing framework for energy-constrained autonomous edge systems. Lightweight near-sensor classifiers are trained via a three-step procedure: (i) a server-side fusion model learns the downstream task, (ii) filter-out-safe (FoS) labels quantify each modality's necessity relative to the fused decision, and (iii) an edge-side fusion model is compacted by injecting near-sensor predictions as auxiliary signals. The result is a run-time decision layer that jointly reduces compute and communication while scaling linearly with sensor count. On a dual-modality (RGB+Depth/LiDAR) setup with SynDrone, FusionSense sustains task quality at substantially higher data-reduction rates than uni-modal filters and delivers large end-to-end gains: up to 33x lower energy at 1% FoI prevalence, 11x at 10%, a 92.3% reduction in quality loss at a fixed 30% data reduction, and roughly 1.5x higher energy savings than the best prior filtering baseline.