Leveraging Non-Equilibrium ECRAM Dynamics for Short-Term Plasticity in Neuromorphic Circuits

This work presents a fully analog memristive synaptic circuit for online spike-timing-dependent plasticity (STDP) learning in spiking neural networks (SNNs). The proposed synapse integrates a local STDP circuit generating gradual timing-dependent conductance updates directly from pre- and post-synaptic spikes. Learning occurs during normal network operation without requiring external digital control or explicit STDP waveform synthesis. Post-layout simulations of the memristive synapse implemented in a 130 nm CMOS technology show spike-timing-dependent conductance adaptation during SNN operation. A 2x2 SNN simulation further illustrates online neuron specialization through unsupervised learning.

The hippocampus, a key brain region for learning and memory, exhibits rich structural diversity, sparse communication, and robust dynamics with incredible energy efficiency. It offers promising insights for novel computing capabilities, particularly when co-designed with emerging hardware technologies. In this work, we draw inspiration from the rodent CA3 hippocampal subregion to develop the first spiking neural network with neuronal diversity and biologically-realistic resting state dynamics demonstrated on memristor hardware. We propose a network downscaling methodology utilizing a 4-prong objective function and demonstrate a small-scale CA3-inspired network with 179 Izhikevich-modeled neurons, 3 neuronal types and 17,996 synapses with similar resting-state dynamics as the orders-of-magnitude larger full-scale network. The small-scale network is mapped to an FPGA/memristor platform using a greedy algorithm and 18,316 memristors. Benefiting from memristor noise, the hardware implementation shows continuous periodic behavior, outperforming simulated hardware. This work showcases the potential of biologically-realistic algorithms on emerging hardware for neuromorphic computing.

Edge neuromorphic systems need compact, configurable hardware that combines probabilistic inference, local learning, and an interface to emerging analogue memory. We present four interface-compatible digital IP blocks implemented as standard-cell CMOS on the SkyWater 130 nm process: a process, voltage and temperature (PVT) sensor built from five selectable ring oscillators that also provides a jitter-based true-random-number generator and a frequency-bounds health monitor; a stochastic leaky integrate-and-fire (LIF) neuron with a configurable LFSR, a programmable activation table, and a refractory period; an on-chip spike-timing-dependent plasticity (STDP) controller with a programmable curve and reward-modulated, eligibility-trace, and anti-Hebbian modes; and a memristive-crossbar controller supporting forming, set, reset, read, and automated current-voltage sweep with current-compliance limiting and half-select biasing. All four blocks share a common serial peripheral interface (SPI) register file; the sensor also exposes a parallel readout. Each occupies a single tile at a 50 MHz target. The suite was verified with 99 cocotb tests at register-transfer and gate level (all passing) and taken through an open standard-cell flow, then submitted for tapeout via the Tiny Tapeout shared-silicon programme. Mapped to the open cell library, each block occupies a post-synthesis cell area of 9.3 to 10.6 thousand square micrometres, places at 61 to 70 per cent tile utilisation, meets the 50 MHz constraint with positive setup and hold margin after clock-tree synthesis, and draws an estimated 0.64 to 0.70 mW under a default switching-activity assumption. The contribution is a coherent, openly released set of building blocks unified by one register interface and one verification flow. All results are from simulation and the implementation flow; no fabricated silicon is reported.